| Citation: |
DUAN Youzhi, LIU Huanle, AI Shuang, QIN Xing, YUE Hui, LIU Boang. Test of the Expansion Performance for Shape Memory Screens[J]. Petroleum Drilling Techniques, 2020, 48(4): 83-88. DOI: 10.11911/syztjs.2020038
|
In order to understand the expansion performance of shape memory screens in the downhole environments, a system for testing screen expansion performance was developed by simulating downhole environments based on its expansion principle, by which the expansion performance of the shape memory screen prototype was tested and analyzed the influences of the circulating fluid flowrate and temperature on the response temperature, expansion rate and expansion force. The results showed that the response temperature increased and the expansion speed decreased with the increase of circulating fluid flowrate. When the circulating fluid temperature was not lower than the initial response temperature, the expansion rate increased as the circulating fluid temperature rose, which showed that the influences of circulating fluid flowrate and temperature on the final expansion force were relatively minor. The test results can provide a test basis for designing a shape memory screen and its application in well completion.
| [1] |
王敏生,光新军,孔令军. 形状记忆聚合物在石油工程中的应用前景[J]. 石油钻探技术, 2018, 46(5): 14–20.
WANG Minsheng, GUANG Xinjun, KONG Lingjun. The prospects of applying shape memory polymer in petroleum engineering[J]. Petroleum Drilling Techniques, 2018, 46(5): 14–20.
|
| [2] |
徐守余,王宁. 油层出砂机理研究综述[J]. 新疆地质, 2007, 25(3): 283–285. doi: 10.3969/j.issn.1000-8845.2007.03.011
XU Shouyu, WANG Ning. Research on reservoir sand production mechanism[J]. Xinjiang Geology, 2007, 25(3): 283–285. doi: 10.3969/j.issn.1000-8845.2007.03.011
|
| [3] |
王小鲁,杨万萍,严焕德,等. 疏松砂岩出砂机理与出砂临界压差计算方法[J]. 天然气工业, 2009, 29(7): 72–75. doi: 10.3787/j.issn.1000-0976.2009.07.022
WANG Xiaolu, YANG Wanping, YAN Huande, et al. The sanding mechanism and sanding critical drawdown calculation in loose sandstone[J]. Natural Gas Industry, 2009, 29(7): 72–75. doi: 10.3787/j.issn.1000-0976.2009.07.022
|
| [4] |
周林然,卢渊,伊向艺. 中国油井出砂预测技术现状[J]. 油气地质与采收率, 2006, 13(2): 100–102. doi: 10.3969/j.issn.1009-9603.2006.02.031
ZHOU Linran, LU Yuan, YI Xiangyi. Present situation on sand prediction technology of oil well in China[J]. Petroleum Geology and Recovery Efficiency, 2006, 13(2): 100–102. doi: 10.3969/j.issn.1009-9603.2006.02.031
|
| [5] |
练章华,刘永刚,张元泽,等. 油气井出砂预测研究[J]. 钻采工艺, 2003, 26(5): 30–31. doi: 10.3969/j.issn.1006-768X.2003.05.011
LIAN Zhanghua, LIU Yonggang, ZHANG Yuanze, et al. Application of plastic strain on sand production prediction in oil well[J]. Drilling & Production Technology, 2003, 26(5): 30–31. doi: 10.3969/j.issn.1006-768X.2003.05.011
|
| [6] |
王勤田,赵彦超,杨晶,等. 油井出砂临界井底流压计算模型及应用[J]. 江汉石油学院学报, 2002, 24(2): 75–76.
WANG Qintian, ZHAO Yanchao, YANG Jing, et al. Calculating model of critical bottomhole pressure of sand production and its application[J]. Journal of Jianghan Petroleum Institute, 2002, 24(2): 75–76.
|
| [7] |
范兴沃,李相方,胡喜峰,等. 利用人工神经网络实现对油气井防砂方法优选[J]. 钻采工艺, 2003, 26(6): 53–54. doi: 10.3969/j.issn.1006-768X.2003.06.019
FAN Xingwo, LI Xiangfang, HU Xifeng, et al. Optimum selection of sand control method in oil & gas well by using artificial neural network[J]. Drilling & Production Technology, 2003, 26(6): 53–54. doi: 10.3969/j.issn.1006-768X.2003.06.019
|
| [8] |
刘大红,宋秀英,刘艳红,等. 割缝筛管防砂设计及应用[J]. 石油机械, 2004, 32(8): 13–16. doi: 10.3969/j.issn.1001-4578.2004.08.005
LIU Dahong, SONG Xiuying, LIU Yanhong, et al. Slotted screen design and its application to oil/water wells in sand control[J]. China Petroleum Machinery, 2004, 32(8): 13–16. doi: 10.3969/j.issn.1001-4578.2004.08.005
|
| [9] |
李天降,张建军. 激光割缝筛管–压裂砾石填充防砂工艺技术[J]. 海洋石油, 2004, 24(1): 51–53. doi: 10.3969/j.issn.1008-2336.2004.01.010
LI Tianjiang, ZHANG Jianjun. The technology of laser slotted screen liner fracturing gravel packing sand contro[J]. Offshore Oil, 2004, 24(1): 51–53. doi: 10.3969/j.issn.1008-2336.2004.01.010
|
| [10] |
高成元,张家营,徐强,等. 一次砾石充填防砂工具的研制[J]. 石油机械, 2003, 31(10): 37–38. doi: 10.3969/j.issn.1001-4578.2003.10.013
GAO Chengyuan, ZHANG Jiaying, XU Qiang, et al. Development of primary sand control tool for gravel packing[J]. China Petroleum Machinery, 2003, 31(10): 37–38. doi: 10.3969/j.issn.1001-4578.2003.10.013
|
| [11] |
董长银,张琪,李志芬,等. 筛管砾石充填井筒附近压降计算方法[J]. 西安石油学院学报(自然科学版), 2002, 17(2): 33–36.
DONG Changyin, ZHANG Qi, LI Zhifen, et al. A new calculation method of the pressure drop around the wellbore of a gravel-packed perforated well[J]. Journal of Xi'an Petroleum Institute (Natural Science Edition), 2002, 17(2): 33–36.
|
| [12] |
张福强. 形状记忆高分子材料[J]. 高分子通报, 1995, 16(1): 34–42.
ZHANG Fuqiang. Shape memory polymers material[J]. Polymer Bulletin, 1995, 16(1): 34–42.
|
| [13] |
喻春红,陈强,侯向辉,等. 化学交联型形状记忆聚氨酯材料研究[J]. 机械科学与技术, 2001, 20(1): 69–70. doi: 10.3321/j.issn:1003-8728.2001.01.030
YU Chunhong, CHEN Qiang, HOU Xianghui, et al. Research on chemical cross-linking shape memory polyurethane material[J]. Mechanical Science and Technology, 2001, 20(1): 69–70. doi: 10.3321/j.issn:1003-8728.2001.01.030
|
| [14] |
METCALFE P. Expandable sand screen technology increases production[J]. World Oil, 2000, 221(2): 94–95.
|
| [15] |
MCMILLIN K. Using expandable sand screens in unconsolidated formations[J]. Offshore, 2000, 60(1): 52, 129.
|
| [16] |
OSUNJAYE G, ABDELFATTAH T. Open hole sand control optimization using shape memory polymer conformable screen with inflow control application[R]. SPE 183947, 2017.
|
| [17] |
孙德旭,陈雪,梁伟,等. 聚氨酯类自膨胀防砂材料制备及性能评价[J]. 油田化学, 2016, 34(2): 217–221.
SUN Dexu, CHEN Xue, LIANG Wei, et al. Preparation and performance evaluation of polyurethane-expandable material in sand control[J]. Oilfield Chemistry, 2016, 34(2): 217–221.
|
| [18] |
童世虎,董雷,徐志洪. 形状记忆聚合物的力学性能研究[J]. 工程与试验, 2009, 49(3): 29–32. doi: 10.3969/j.issn.1674-3407.2009.03.008
TONG Shihu, DONG Lei, XU Zhihong. The research on mechanical properties of shape memory polymer[J]. Engineering & Test, 2009, 49(3): 29–32. doi: 10.3969/j.issn.1674-3407.2009.03.008
|
| [19] |
山口章三郎. 形态记忆[J]. 化学工业, 1983, 34(10): 57–60.
YAMAGUCHI Saburo. Shape memory[J]. Chemistry Industry, 1983, 34(10): 57–60.
|
| [20] |
WANG Xiuli, OSUNJAYE G. Advancement in openhole sand control applications using shape memory polymer[R]. SPE 181361, 2016.
|
| [21] |
FURGIER J, VIGUERIE B, AUBRY E, et al. Stand alone screens: what key parameters are really important for a successful design[R]. SPE 165170, 2013.
|
| [22] |
YUAN Yusheng, GOODSON J E, JOHNSON M H, et al. In-situ mechanical and functional behavior characterization of shape memory polymer for sand control applications[R]. SPE 143204, 2012.
|
| [23] |
CARREJO N, HORNER, D N, JOHNSON M H. Shape memory polymer as a sand management alternative to gravel packing[R]. SPE 147101, 2011.
|
| [1] | ZHANG Xuliang, ZHANG Chi, ZHOU Bo, YANG Junqi, LU Yunhu, YIN Bangtang. Numerical Simulation of Gas-Liquid Two-Phase Flow Pattern in Large Annulus of Deep Well[J]. Petroleum Drilling Techniques, 2024, 52(6): 37-49. DOI: 10.11911/syztjs.2024109 |
| [2] | DAI Yifan, HOU Bing, LIAO Zhihao. Simulation of Hydraulic Fracturing in Deep Hot Dry Rock Reservoir Based on Phase-Field Method[J]. Petroleum Drilling Techniques, 2024, 52(2): 229-235. DOI: 10.11911/syztjs.2024047 |
| [3] | WU Zebing, XI Kaikai, ZHAO Haichao, HUANG Hai, ZHANG Wenchao, YANG Chenjuan. Simulation Study on Temperature Field and Rock Breaking Characteristics of the Bionic PDC Cutter in Rotating State[J]. Petroleum Drilling Techniques, 2022, 50(2): 71-77. DOI: 10.11911/syztjs.2021114 |
| [4] | XIAN Yuxi, CHEN Chaofeng, FENG Meng, HAO Youzhi. Numerical Simulation of Multiphase Flow in Fracture Networks in Shale Oil Reservoir[J]. Petroleum Drilling Techniques, 2021, 49(5): 94-100. DOI: 10.11911/syztjs.2021090 |
| [5] | YANG Yingtao, WEN Qingzhi, DUAN Xiaofei, WANG Shuting, WANG Feng. Numerical Simulation for Flow Conductivity in Channeling Fractures[J]. Petroleum Drilling Techniques, 2016, 44(6): 104-110. DOI: 10.11911/syztjs.201606018 |
| [6] | FENG Yijing, ZHANG Laibin, ZHENG Wenpei, DENG Rong, FENG Ding. A Simulation Study on the Cutter Loads on the End Face of DTH Bits[J]. Petroleum Drilling Techniques, 2016, 44(3): 77-82. DOI: 10.11911/syztjs.201603014 |
| [7] | Kuang Yuchun, Chen Yuzhong, Tu Junwen, Zhang Zhi. Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN[J]. Petroleum Drilling Techniques, 2014, 42(4): 111-115. DOI: 10.3969/j.issn.1001-0890.2014.04.021 |
| [8] | Sun Xu, Zhao Jinhai, Teng Chunming, Yang Chuanshu, Wang Mingfang. Status and Prospect of Drilling Simulation Technique at Home and Abroad[J]. Petroleum Drilling Techniques, 2012, 40(5): 54-58. DOI: 10.3969/j.issn.1001-0890.2012.05.012 |
| [9] | Li Hongqian. Numerical Simulation on the Annular Flow Induced by Spiral Casing Centralizer[J]. Petroleum Drilling Techniques, 2012, 40(2): 25-29. DOI: 10.3969/j.issn.1001-0890.2012.02.005 |
| [10] | Numerical Simulation of Flow Field of Center Partition-Type PDC Bit[J]. Petroleum Drilling Techniques, 2011, 39(4): 107-110. DOI: 10.3969/j.issn.1001-0890.2011.04.023 |
| 1. |
罗成波，周兴付，欧彪，刘伟，张生军，张玉胜，王治国. 川南下寒武统筇竹寺组井研—犍为地区页岩气安全优快钻井技术及应用. 西南石油大学学报(自然科学版). 2024(06): 146-154 .
|
Supervisor：SINOPEC GROUP
Sponsor：Sinopec Research Institute of Petroleum Engineering
Serial Number：CN 11-1763/TE, ISSN 1001-0890
Chief Editor： WANG Minsheng
Supported by: Beijing Renhe Information Technology Co., Ltd. 
Service Account
Subscription Account
Video Channel
QR Code on Taobao
Wechat QR Code
Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.
DownLoad: