Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN

Kuang Yuchun; Chen Yuzhong; Tu Junwen; Zhang Zhi

doi:10.3969/j.issn.1001-0890.2014.04.021

Volume 42 Issue 4

Jul. 2014

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2014 > 42(4): 111-115. > DOI: 10.3969/j.issn.1001-0890.2014.04.021

Kuang Yuchun, Chen Yuzhong, Tu Junwen, Zhang Zhi. Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN[J]. Petroleum Drilling Techniques, 2014, 42(4): 111-115. DOI: 10.3969/j.issn.1001-0890.2014.04.021

Citation:

PDF (1158 KB)

Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN

1.
School of Mechatronic Engineering, Southwest Petroleum University, Chengdu, Sichuan, 610500, China;
2.
China Petroleum Technology and Development Corporation, Beijing, 100009, China;
3.
Gas Production Engineering Research Institute, PetroChina So

More Information

Received Date: February 16, 2014
Revised Date: May 24, 2014

Graphical Abstract

Abstract

Abstract

The quantification of PDC bit cutting parameters using simulation method is an important technique for drill bit customization.To improve the efficiency and accuracy of PDC bit drilling simulation and realize a seamless connection with 3D design system of drill bit,UG/OPEN was imported in the study.Based on PDC bit cutting parameters theory and original computing method of cutting volume,the Boolean operation of UG software was used for redevelopment.Meanwhile,the principle of UG/OPEN quick access to the cutting volume was utilized to build the bottomhole PDC bit model,In this way,the cutting process was simulated equivalent to the geometric Boolean subtraction,and numerical computation was made to obtain cutting volume,contact area,cutting force and other parameters.The study showed that the simulation of cutting parameters revealed the same tendency as the existing numerical simulation,and has higher accuracy and simulation efficiency.Therefore,the new method of cutting parameters simulation based on UG/OPEN provided a technical foundation for rapid customization of PDC bit.
- PDC bit,
- cutting parameters,
- simulation

FullText(HTML)

References (7)

References

[1]	陈国庆.PDC钻头的发展趋势[J].石油机械, 2003, 31(增刊1):103-106. Chen Guoqing.The development trend of PDC bit[J].China Petroleum Machinery, 2003, 31(supplement 1):103-106.
[2]	田丰, 杨迎新, 任海涛, 等.PDC钻头切削齿工作区域及切削量的分析理论和计算方法[J].钻采工艺, 2009, 32(2):51-53. Tian Feng, Yang Yingxin, Ren Haitao, et al.Analytical theory and computational method of contact area and cutting volume of PDC bit cutters[J].Drilling Production Technology, 2009, 32(2):51-53.
[3]	王亚萍, 况雨春, 杨高.基于MATLAB的PDC钻头几何学仿真模型[J].西南石油大学学报, 2007, 29(增刊2):116-118. Wang Yaping, Kuang Yuchun, Yang Gao.The geometry emulation model of PDC bit by using MATLAB[J].Journal of Southwest Petroleum University, 2007, 29(supplement 2):116-118.
[4]	任海涛, 杨迎新, 陈炼, 等.PDC钻头钻进仿真系统数字化方法研究[J].西南石油大学学报:自然科学版, 2010, 32(5):26-29. Ren Haitao, Yang Yingxin, Chen Lian, et al.Research on the digital method of the PDC bit drilling progress simulation system[J].Journal of Southwest Petroleum University:Science Technology Edition, 2010, 32(5):26-29.
[5]	廖忠民, 吴泽兵, 魏秦文.利用Pro/TOOLKIT计算PDC齿切削量参数[J].石油矿场机械, 2005, 34(1):47-50. Liao Zhongmin, Wu Zebing, Wei Qinwen.Calculating the cutting parameters of PDC bit with Pro/TOOLKIT[J].Oil Field Equipment, 2005, 34(1):47-50.
[6]	刘凯, 夏继强, 石侃.基于UG的椭圆锥齿轮的仿真加工[J].机械传动, 2012, 36(8):112-115, 118. Liu Kai, Xia Jiqiang, Shi Kan.Simulation processing of elliptic bevel gear based on UG[J].Journal of Mechanical Transmission, 2012, 36(8):112-115, 118.
[7]	邹德永, 张将海, 王瑞和.PDC钻头力学模型的试验研究[J].石油钻探技术, 2005, 33(2):41-43. Zou Deyong, Zhang Jianghai, Wang Ruihe.The experiment study on mechanical model of PDC bits[J].Petroleum Drilling Techniques, 2005, 33(2):41-43.

[1]	WANG Xingyuan, LU Dengyun, YUAN Zhiping. Borehole Strengthening Technology with Oil-Based Drilling Fluid in the Western Sichuan Basin[J]. Petroleum Drilling Techniques, 2021, 49(1): 34-40. DOI: 10.11911/syztjs.2020116
[2]	YANG Jing, TU Fuhong, HUO Rujun, TAO Ruidong, SHANG Zibo, GUO Liang. Key Technologies for Slim Hole Drilling in the Southern Sulige Block[J]. Petroleum Drilling Techniques, 2021, 49(1): 22-27. DOI: 10.11911/syztjs.2020082
[3]	SHEN Zhaochao, HUO Rujun, YU Yanfei, DONG Yifan, NI Xiaowei, LEI Yu. One-Trip Drilling Technology of the Second-Spud Section for Slim-Holes in the Southern Sulige Block[J]. Petroleum Drilling Techniques, 2020, 48(6): 15-20. DOI: 10.11911/syztjs.2020081
[4]	ZENG Bo, WANG Xinghao, HUANG Haoyong, ZHANG Nanqiao, YUE Wenhan, DENG Qi. Key Technology of Volumetric Fracturing in Deep Shale Gas Horizontal Wells in Southern Sichuan[J]. Petroleum Drilling Techniques, 2020, 48(5): 77-84. DOI: 10.11911/syztjs.2020073
[5]	HU Daliang, OU Biao, HE Long, XIAO Guoyi, LI Wensheng, TANG Yuxiang. Casing Program Optimization and Drilling Matching Technologies for Marine Ultra-Deep Highly Deviated Wells in Western Sichuan[J]. Petroleum Drilling Techniques, 2020, 48(3): 22-28. DOI: 10.11911/syztjs.2020053
[6]	LI Chuanwu, LAN Kai, DU Xiaosong, HAN Mingtian, LIU Chunlin. Difficulties and Countermeasures in Horizontal Well Drilling for Shale Gas in Southern Sichuan[J]. Petroleum Drilling Techniques, 2020, 48(3): 16-21. DOI: 10.11911/syztjs.2020055
[7]	HONG Guobin, CHEN Mian, LU Yunhu, JIN Yan. Study on the Anisotropy Characteristics of Deep Shale in the Southern Sichuan Basin and Their Impacts on Fracturing Pressure[J]. Petroleum Drilling Techniques, 2018, 46(3): 78-85. DOI: 10.11911/syztjs.2018022
[8]	ZANG Yanbin. Key Drilling Technology for Deep Shale Gas Reservoirs in the Southeastern Sichuan Region[J]. Petroleum Drilling Techniques, 2018, 46(3): 7-12. DOI: 10.11911/syztjs.2018073
[9]	Tang Jiagui. Discussion on Shale Gas Horizontal Drilling Technology in Southern Sichuan[J]. Petroleum Drilling Techniques, 2014, 42(5): 47-51. DOI: 10.11911/syztjs.201405008
[10]	Zhou Chengxiang, Zhou Yucang, Li Shuangming, Hu Yuanyuan. Fracturing Pressure Reducing Technique for Shale Gas Well in the Southeastern Sichuan[J]. Petroleum Drilling Techniques, 2014, 42(4): 42-47. DOI: 10.3969/j.issn.1001-0890.2014.04.008

Cited By

Cited by

Periodical cited type(28)

1.	黄明泉. 页岩气三维水平井剖面设计技术. 江汉石油职工大学学报. 2024(01): 45-47 .
2.	许佳鑫，宋明阶，赵红燕，侯亮，李胜楠. 涪陵页岩气田加密井防碰关键技术. 江汉石油职工大学学报. 2024(02): 38-41 .
3.	王治国，严焱诚，黄河淳，罗成波. 井研-犍为地区难钻地层钻头优选及应用. 科技和产业. 2024(16): 194-198 .
4.	刘文武，刘杰，芮学来. 淮南张集矿东-1煤上采区多分支水平注浆井钻井技术. 矿产勘查. 2024(12): 2329-2336 .
5.	罗平亚，李文哲，代锋，李道雄，钟成旭，白杨. 四川盆地南部龙马溪组页岩气藏井壁强化钻井液技术. 天然气工业. 2023(04): 1-10 .
6.	赵文彬，宋文豪. 永川黄202区块页岩气水平井钻井提速对策分析. 天然气勘探与开发. 2023(02): 127-134 .
7.	田辉，仇恒彬，董广华. 预弯曲钟摆钻具防斜打快技术在柯坪高陡构造地层的应用. 西部探矿工程. 2022(01): 39-43 .
8.	袁光杰，付利，王元，郭凯杰，陈刚. 我国非常规油气经济有效开发钻井完井技术现状与发展建议. 石油钻探技术. 2022(01): 1-12 . 本站查看
9.	王文刚，胡大梁，欧彪，房舟，刘磊. 井研–犍为地区缝洞型复杂地层钻井关键技术. 石油钻探技术. 2022(02): 58-63 . 本站查看
10.	刘伟，朱礼平，潘登雷，周楚坤，梁霄，刘小斌. WR气田深层页岩气钻井提速提效实践与认识. 天然气技术与经济. 2022(03): 44-50 .
11.	贾利春，李枝林，张继川，陶怀志，李雷，黄崇君，魏萧. 川南海相深层页岩气水平井钻井关键技术与实践. 石油钻采工艺. 2022(02): 145-152 .
12.	路保平. 中国石化石油工程技术新进展与发展建议. 石油钻探技术. 2021(01): 1-10 . 本站查看
13.	刘厚彬，崔帅，孟英峰，周彦行，罗益. 深层脆性页岩水平井井壁崩落失稳研究. 断块油气田. 2021(03): 323-328 .
14.	郭军，陈相霖，赵训林，王文彬，李岩，韩菲. 桂中-南盘江地区黔水地1井钻井关键技术. 断块油气田. 2021(03): 423-427 .
15.	娄尔标，周波，刘洪涛，陈锋，王文昌，薛艳鹏. 巨厚砾石层气体钻井井筒不规则性对井斜的影响研究. 石油钻探技术. 2021(03): 62-66 . 本站查看
16.	王志亮，张震，周旺明，郭良林，夏成宇，黄和祥. 页岩气井眼净化模拟研究及影响因素分析. 石油机械. 2021(07): 23-30 .
17.	杨哲，李晓平，万夫磊. 四川长宁页岩气井身结构优化探讨. 钻采工艺. 2021(03): 20-23 .
18.	严俊涛，叶新群，付永强，李伟，黄南，王业众. 川南深层页岩气旋转导向钻井技术瓶颈的突破. 录井工程. 2021(03): 6-10 .
19.	王志亮，夏成宇，张震，李郑涛，张新红. 改进型铝合金钻杆对岩屑运移仿真分析. 石油机械. 2021(10): 17-23 .
20.	王志亮，赵莹，丛成，何璟彬，方永，夏成宇. 基于CFD-DEM的新型铝合金钻杆携岩仿真分析. 机床与液压. 2021(20): 130-136 .
21.	王志亮，陈锟，张震，周旺明，黄和祥，夏成宇. 新型钻杆的携岩原理研究与数值仿真分析. 工程设计学报. 2021(05): 602-614 .
22.	石崇东，王万庆，史配铭，杨勇. 盐池区块深层页岩气水平井钻井关键技术研究. 石油钻探技术. 2021(06): 23-28 . 本站查看
23.	尹建，刘菊，黎俊吾. 川南高温深层页岩气工程技术支撑管理模式及其应用. 天然气技术与经济. 2021(06): 26-29+49 .
24.	夏海帮. 页岩气井双暂堵压裂技术研究与现场试验. 石油钻探技术. 2020(03): 90-96 . 本站查看
25.	丁士东，赵向阳. 中国石化重点探区钻井完井技术新进展与发展建议. 石油钻探技术. 2020(04): 11-20 . 本站查看
26.	刘衍前. 涪陵页岩气田加密井钻井关键技术. 石油钻探技术. 2020(05): 21-26 . 本站查看
27.	刘伟. 川西气田须家河组致密坚硬地层钻井提速关键技术. 天然气技术与经济. 2020(05): 44-51 .
28.	王健. 国内深层页岩气钻井难点及技术进展. 石油化工应用. 2020(12): 1-5+20 .

Other cited types(4)

Get Citation

PDF

XML

Article Metrics

Article views (3282) PDF downloads (3634) Cited by(32)

Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN

Abstract

References

Related Articles

Cited by

Periodical cited type(28)

Other cited types(4)

Catalog

Article Metrics

Related

Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN

Abstract

References

Related Articles

Cited by

Periodical cited type(28)

Other cited types(4)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content