LOU Erbiao, ZHOU Bo, LIU Hongtao, CHEN Feng, WANG Wenchang, XUE Yanpeng. Effect of Irregular Wellbores on Well Deviation in Air Drilling Through Thick Conglomerate Formations[J]. Petroleum Drilling Techniques, 2021, 49(3): 62-66. DOI: 10.11911/syztjs.2021003
Citation: LOU Erbiao, ZHOU Bo, LIU Hongtao, CHEN Feng, WANG Wenchang, XUE Yanpeng. Effect of Irregular Wellbores on Well Deviation in Air Drilling Through Thick Conglomerate Formations[J]. Petroleum Drilling Techniques, 2021, 49(3): 62-66. DOI: 10.11911/syztjs.2021003

Effect of Irregular Wellbores on Well Deviation in Air Drilling Through Thick Conglomerate Formations

More Information
  • Received Date: March 18, 2020
  • Revised Date: December 22, 2020
  • Available Online: March 28, 2021
  • Proneness to well deviation and difficulty in casing running are two bottlenecks to be solved urgently in air drilling through the thick conglomerate formation. Field test data revealed that well deviation control was still challenging even air hammer drilling with a marked control effect on deviation was adopted, and wellbore regularity was poor. This phenomenon is difficult to explain with present theories of deviation control. Existing bottom hole assembly (BHA) force models do not consider the irregularity of the wellbore, and assume that the wellbore is smooth and regular. In this paper, the mechanical model of interaction between the irregular wellbore and BHA was built with finite element method on the basis of field data, and the influence of wellbore irregularity on the mechanical characteristics of BHA was analyzed. The model results demonstrate that the irregular wellbore is easy to form additional fulcrum and shorten the swing distance of pendulum BHA, thus greatly reducing deviation-reducing force. It may even convert the lateral force on the drill bit into a deviation-increasing force, resulting in well deviation control failure. It is confirmed by case analysis that the wellbore drilled by the pre-bent pendulum BHA is regular in air drilling through the thick conglomerate formation, with effective well deviation control and smooth running of casing. Field data indirectly supports the significant impact of wellbore irregularity on well deviation, which should be considered in the BHA mechanical analysis.
  • [1]
    肖洲,吴俊,颜小兵,等. 气体钻井技术的发展趋势与新技术探讨[J]. 钻采工艺,2014,37(5):5–7. doi: 10.3969/J.ISSN.1006-768X.2014.05.02

    XIAO Zhou, WU Jun, YAN Xiaobing, et al. Development trend of gas drilling and discussion on new gas drilling techniques[J]. Drilling & Production Technology, 2014, 37(5): 5–7. doi: 10.3969/J.ISSN.1006-768X.2014.05.02
    [2]
    刘伟,何龙,胡大梁,等. 川南海相深层页岩气钻井关键技术[J]. 石油钻探技术,2019,47(6):9–14. doi: 10.11911/syztjs.2019118

    LIU Wei, HE Long, HU Daliang, et al. Key technologies for deep marine shale gas drilling in Southern Sichuan[J]. Petroleum Drilling Techniques, 2019, 47(6): 9–14. doi: 10.11911/syztjs.2019118
    [3]
    叶金龙,沈建文,吴玉君,等. 川深1井超深井钻井提速关键技术[J]. 石油钻探技术,2019,47(3):121–126. doi: 10.11911/syztjs.2019056

    YE Jinlong, SHEN Jianwen, WU Yujun, et al. Key techniques of drilling penetration rate improvement in ultra-deep Well Chuanshen-1[J]. Petroleum Drilling Techniques, 2019, 47(3): 121–126. doi: 10.11911/syztjs.2019056
    [4]
    杜劲,尹松,闫伟,等. 国内外井斜控制技术的发展[J]. 机械工程师,2007(2):22–24. doi: 10.3969/j.issn.1002-2333.2007.02.013

    DU Jin, YIN Song, YAN Wei, et al. The development of well deviation technique at home and abroad[J]. Mechanical Engineer, 2007(2): 22–24. doi: 10.3969/j.issn.1002-2333.2007.02.013
    [5]
    张辉,高德利,段明星. 气体钻井井斜机理研究[J]. 石油天然气学报,2012,34(2):103–105, 109. doi: 10.3969/j.issn.1000-9752.2012.02.022

    ZHANG Hui, GAO Deli, DUAN Mingxing. Research on the mechanism of hole deviation in gas drilling[J]. Journal of Oil and Gas Technology, 2012, 34(2): 103–105, 109. doi: 10.3969/j.issn.1000-9752.2012.02.022
    [6]
    刘彪,杨明合,钟文健,等. 空气钻井井斜因素分析及工艺应用[J]. 断块油气田,2009,16(2):120–123.

    LIU Biao, YANG Minghe, ZHONG Wenjian, et al. Factors of affecting borehole deviation for air drilling and the technical application[J]. Fault-Block Oil & Gas Field, 2009, 16(2): 120–123.
    [7]
    邓柯,刘殿琛,李宬晓. 预弯曲动力学井斜控制技术在长宁构造气体钻井中的应用[J]. 钻采工艺,2020,43(2):38–40.

    DENG Ke, LIU Dianchen, LI Chengxiao. Application of pre-bending dynamic well inclination control technology in gas drilling in Changning Structure[J]. Drilling & Production Technology, 2020, 43(2): 38–40.
    [8]
    狄勤丰,胡菲菲,周波,等. 气体钻井预弯曲钟摆钻具控斜的动力学行为[J]. 天然气工业,2019,39(7):94–98. doi: 10.3787/j.issn.1000-0976.2019.07.012

    DI Qinfeng, HU Feifei, ZHOU Bo, et al. Dynamic behaviors of deviation control of the prebent pendulum BHA in gas drilling[J]. Natural Gas Industry, 2019, 39(7): 94–98. doi: 10.3787/j.issn.1000-0976.2019.07.012
    [9]
    曾桂元,代锋,荆华,等. 元坝地区气体钻井井斜控制技术与应用[J]. 钻采工艺,2015,38(1):29–31. doi: 10.3969/J.ISSN.1006-768X.2015.01.08

    ZENG Guiyuan, DAI Feng, JING Hua, et al. Measures of borehole deviation control during gas drilling in Yuanba Area[J]. Drilling & Production Technology, 2015, 38(1): 29–31. doi: 10.3969/J.ISSN.1006-768X.2015.01.08
    [10]
    GAO Deli, ZHENG Deshuai. Study of a mechanism for well deviation in air drilling and its control[J]. Petroleum Science & Technology, 2011, 29(4): 358–365.
    [11]
    ZHAO Zengxin, GAO Deli, ZHENG Deshuai. Mechanism of well deviation in air drilling and its control[R]. SPE 130201, 2010.
    [12]
    ZHANG He, DI Qinfeng, WANG Wenchang, et al. Lateral vibration analysis of pre-bent pendulum bottomhole assembly used in air drilling[J]. Journal of Vibration and Control, 2018, 24(22): 5213–5224. doi: 10.1177/1077546317747778
    [13]
    狄勤丰,王春生,李宁,等. 巨厚砾岩层气体钻井井眼特征[J]. 石油学报,2015,36(3):372–377. doi: 10.7623/syxb201503013

    DI Qinfeng, WANG Chunsheng, LI Ning, et al. Wellbore characteristic of gas drilling in thicker conglomerate[J]. Acta Petrolei Sinica, 2015, 36(3): 372–377. doi: 10.7623/syxb201503013
    [14]
    张鹤,狄勤丰,覃光煦,等. 预弯底部钻具组合横向振动响应的快速求解[J]. 石油学报,2017,38(12):1441–1447. doi: 10.7623/syxb201712012

    ZHANG He, DI Qinfeng, QIN Guangxu, et al. Quick solution method for lateral vibration response of pre-bent bottom hole assembly[J]. Acta Petrolei Sinica, 2017, 38(12): 1441–1447. doi: 10.7623/syxb201712012
    [15]
    KAMEL J M, YIGIT A S. Modeling and analysis of stick-slip and bit bounce in oil well drillstrings equipped with drag bits[J]. Journal of Sound and Vibration, 2014, 333(25): 6885–6899. doi: 10.1016/j.jsv.2014.08.001
    [16]
    HUU T N. Study on dynamic stability of drilling string for improved bottom hole assembly and operating drilling parameters to drill wells in the basement[R]. IADC/SPE 180501, 2016.
    [17]
    LIU Yongsheng, GAO Deli. A nonlinear dynamic model for characterizing downhole motions of drill-string in a deviated well[J]. Journal of Natural Gas Science and Engineering, 2017, 38: 466–474. doi: 10.1016/j.jngse.2017.01.006
    [18]
    张洪武, 关振群, 李云鹏, 等. 有限元分析与CAE技术基础[M]. 北京: 清华大学出版社, 2004: 54-55.

    ZHANG Hongwu, GUAN Zhenqun, LI Yunpeng, et al. Finite element analysis and CAE technology foundation[M]. Beijing: Tsinghua University Press, 2004: 54-55.
  • Related Articles

    [1]HU Jinjun, ZHANG Lili, ZHANG Yao, MENG Qingxiang, HUANG Zhigang. Ultra-Short Liner Cementing Technology for Highly Deviated Wells in the Chenghai Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(3): 81-86. DOI: 10.11911/syztjs.2020132
    [2]HU Daliang, OU Biao, HE Long, XIAO Guoyi, LI Wensheng, TANG Yuxiang. Casing Program Optimization and Drilling Matching Technologies for Marine Ultra-Deep Highly Deviated Wells in Western Sichuan[J]. Petroleum Drilling Techniques, 2020, 48(3): 22-28. DOI: 10.11911/syztjs.2020053
    [3]SUN Xiaofeng, ZHANG Kebo, YUAN Yujin, NI Xiaodong, CHEN Ye. The Establishment and Correction of a Prediction Model for the Repose Angle of a Cuttings Bed in Highly Deviated Well Interval[J]. Petroleum Drilling Techniques, 2019, 47(4): 22-28. DOI: 10.11911/syztjs.2019039
    [4]ZHU Kuanliang, ZHOU Yan, HU Zhongzhi. Application of a PDC-Roller Hybrid Bit in Highly-Deviated Wells of the Nanpu Oilfield[J]. Petroleum Drilling Techniques, 2017, 45(6): 60-64. DOI: 10.11911/syztjs.201706011
    [5]FU Li, SHEN Siyuan, WANG Kailong, ZHENG Li. Research on the Driving Force of the Pumping Down Tool for a PE Screen Completion in CBM Horizontal Wells[J]. Petroleum Drilling Techniques, 2017, 45(1): 68-72. DOI: 10.11911/syztjs.201701012
    [6]Luo Hengrong, Suo Zhongwei, Tan Yong, Zhang Renlong, Li Chao. Application of Reducing WOB Stack Impactor in Well Pan 40-Xie 501[J]. Petroleum Drilling Techniques, 2015, 43(5): 112-115. DOI: 10.11911/syztjs.201505019
    [7]Wang Yan, Liu Baiyan, Wang Ke. PWM Control of the Anti-Deviation Mechanism in the Vertical Drilling System[J]. Petroleum Drilling Techniques, 2015, 43(2): 120-125. DOI: 10.11911/syztjs.201502021
    [8]Han Zhiyong. Discussion on Effects of Internal and External Pressure on Axial Force and Stability of Pipe String in Oil Wells[J]. Petroleum Drilling Techniques, 2013, 41(6): 12-18. DOI: 10.3969/j.issn.1001-0890.2013.06.003
    [9]Li Mingzhong, Wang Chengwen, Wang Changquan, Guo Shenglai, Fang Qun. Numerical Simulation of Cement Displacement in Eccentric Annulus at Highly Deviated Wells[J]. Petroleum Drilling Techniques, 2012, 40(5): 40-44. DOI: 10.3969/j.issn.1001-0890.2012.05.009
    [10]Mechanism for Deviation Control of Drilling Assembly with Air Hammer[J]. Petroleum Drilling Techniques, 2011, 39(2): 56-59. DOI: 10.3969/j.issn.1001-0890.2011.02.010
  • Cited by

    Periodical cited type(1)

    1. 谭章龙,张林强,邵明仁,王春鹏,李小龙,周璐,杨浩. 煤层气藏水平井氮气钻井优化设计方法及应用. 特种油气藏. 2025(02): 145-153 .

    Other cited types(2)

Catalog

    Article Metrics

    Article views (607) PDF downloads (97) Cited by(3)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return