Volume 44 Issue 4
Jul.  2016
Turn off MathJax
Article Contents
Abstract
References
Related Articles
LIU Xiuquan, LI Jiayi, REN Keren, XU Liangbin, CHANG Yuanjiang, SONG Qiang. A Calculation Method for the Top Tension of Deepwater Drilling Risers Based on Recoil Response[J]. Petroleum Drilling Techniques, 2016, 44(4): 47-51. DOI: 10.11911/syztjs.201604009
Citation: LIU Xiuquan, LI Jiayi, REN Keren, XU Liangbin, CHANG Yuanjiang, SONG Qiang. A Calculation Method for the Top Tension of Deepwater Drilling Risers Based on Recoil Response[J]. Petroleum Drilling Techniques, 2016, 44(4): 47-51. DOI: 10.11911/syztjs.201604009
shu

A Calculation Method for the Top Tension of Deepwater Drilling Risers Based on Recoil Response

  • 1.

    Center for Offshore Equipment and Safety Technology, China University of Petroleum(Huadong), Qingdao, Shandong, 266580, China;

  • 2.

    Technical Center, CNPC Baoji Oilfield Machinery Co. Ltd., Baoji, Shaanxi, 721002, China;

  • 3.

    CNOOC Research Institute

More Information
  • Received Date: December 20, 2015
  • Revised Date: April 17, 2016
    Graphical Abstract
    • Abstract
  • Tension is the key factor in the safe operation of deepwater drilling riser systems, especially for the safe operation of emergency disconnection of the riser system. However, the present calculation methods of the top tension of drilling riser system (including the API theoretical method, a method based on the residual tension at bottom of the drilling riser system and a method based on the maximal hook load during drilling riser system running procedure) do not take riser recoil response into consideration. To address the issue, the tension design criteria based on the riser recoil response was determined. The modified API top tension calculation method and process were proposed and then verified by examples. The results showed that the modified API algorithm could provide reasonable tension calculation for riser systems. The LMRP displacement, the stroke of tensioner and fluctuation range of the effective tension during riser recoil were reduced, thus improving the security of drilling riser system after emergency disconnection and ensuring a safe deepwater drilling riser system emergency disconnection operation.
    • FullText(HTML)
    • References (17)
  • [1]
    刘秀全,陈国明,彭朋,等.深水钻井隔水管单根寿命管理方法[J].石油钻探技术,2011,39(2):40-44.LIU Xiuquan,CHEN Guoming,PENG Peng,et al.Deepwater drilling riser joints management[J].Petroleum Drilling Techniques,2011,39(2):40-44.
    [2]
    刘秀全,陈国明,宋强,等.基于有限元法的深水钻井隔水管压溃评估[J].石油钻探技术,2015,43(4):43-47.LIU Xiuquan,CHEN Guoming,SONG Qiang,et al.Collapse assessment for deepwater drilling risers on the basis of finite element method[J].Petroleum Drilling Techniques,2015,43(4):43-47.
    [3]
    HOCK C J,YOUNG R D.A deepwater riser emergency disconnect antirecoil system[J].Journal of Petroleum Technology,1993,45(8):744-751.
    [4]
    API RP 16Q Recommended practice for design selection operation and maintenance of marine drilling riser system[S].
    [5]
    PERSENT E,GUESNON J M,HEITZ S,et al.New riser design and technologies for greater water depth and deeper drilling operations[R].SPE 119519,2009.
    [6]
    鞠少栋,畅元江,陈国明,等.超深水钻井作业隔水管顶张力确定方法[J].海洋工程,2011,29(1):100-104.JU Shaodong,CHANG Yuanjiang,CHEN Guoming,et al.Determination methods for the top tension of ultra deepwater drilling risers[J].The Ocean Engineering,2011,29(1):100-104.
    [7]
    杨进,孟炜,姚梦彪,等.深水钻井隔水管顶张力计算方法[J].石油勘探与开发,2015,42(1):107-110.YANG Jin,MENG Wei,YAO Mengbiao,et al.Calculation method of riser top tension in deep water drilling[J].Petroleum Exploration and Development,2015,42(1):107-110.
    [8]
    阮庆,陈欢,杨胜,等.深水钻井隔水管顶张力最优化设计[J].中国造船,2009,50(增刊1):20-24.RUAN Qing,CHEN Huan,YANG Sheng,et al.Optimal design of deepwater drilling riser[J].Shipbuilding of China,2009,50(supplement 1):20-24.
    [9]
    RUSTAD A M,LARSEN C M,SØRENSEN A J.FEM modelling and automatic control for collision prevention of top tensioned risers[J].Marine Structures,2008,21(1):80-112.
    [10]
    张磊,畅元江,刘秀全,等.深水钻井隔水管与防喷器紧急脱离后的反冲响应分析[J].石油钻探技术,2013,41(3):25-30.ZHANG Lei,CHANG Yuanjiang,LIU Xiuquan,et al.Recoil analysis for deepwater drilling riser after emergency disconnection with blowout preventer[J].Petroleum Drilling Techniques,2013,41(3):25-30.
    [11]
    鞠少栋,畅元江,陈国明,等.深水钻井隔水管悬挂窗口确定方法[J].石油学报,2012,33(1):133-136.JU Shaodong,CHANG Yuanjiang,CHEN Guoming,et al.Determination of the hang-off window for deepwater drilling riser[J].Acta Petrolei Sinica,2012,33(1):133-136.
    [12]
    畅元江,陈国明,孙友义,等.深水钻井隔水管的准静态非线性分析[J].中国石油大学学报(自然科学版),2008,32(3):114-118.CHANG Yuanjiang,CHEN Guoming,SUN Youyi,et al.Quasi-static nonlinear analysis of deepwater drilling risers[J].Journal of China University of Petroleum (Edition of Natural Science),2008,32(3):114-118.
    [13]
    孙友义,陈国明,畅元江,等.超深水隔水管悬挂动力分析与避台风策略探讨[J].中国海洋平台,2009,24(2):29-32.SUN Youyi,CHEN Guoming,CHANG Yuanjiang,et al.Hang-off dynamic analysis and the discuss of typhoon-avoidance strategy for ultra-deepwater drilling risers[J].China Offshore Platform,2009,24(2):29-32.
    [14]
    畅元江,陈国明,许亮斌.导向架隔水管在波流联合作用下的非线性动力响应[J].中国石油大学学报(自然科学版),2006,30(5):74-77,83.CHANG Yuanjiang,CHEN Guoming,XU Liangbin.Non-linear dynamic response induced by wave-current for marine risers with guide-frames[J].Journal of China University of Petroleum (Edition of Natural Science),2006,30(5):74-77,83.
    [15]
    MA P,PYKE J,VANKADARI A,et al.Ensuring safe riser emergency disconnect in harsh environments:experience and design requirements,Anchorage,Alaska,USA,June 30-July 5,2013[C].ISOPE,2013.
    [16]
    LANG D W,REAL J,LANE M.Recent developments in drilling riser disconnect and recoil analysis for deepwater applications,Honolulu,Hawaii,USA,May 31-June 5,2009[C].ASME,2009.
    [17]
    盛磊祥,王荣耀,许亮斌,等.台风应急期间深水钻井隔水管悬挂撤离安全分析[J].石油钻探技术,2015,43(4):25-29.SHENG Leixiang,WANG Rongyao,XU Liangbin,et al.Safety analysis of the hang-off of deepwater drilling risers during a typhoon emergency period[J].Petroleum Drilling Techniques,2015,43(4):25-29.
    • Related Articles

  • Related Articles

    [1]WANG Xu, LIU Dejun, WU Shiwei, LI Yang, ZHAI Ying. Simulation of Hydraulic Fracture Responses Based on a Magnetotelluric Monitoring Method[J]. Petroleum Drilling Techniques, 2023, 51(6): 115-119. DOI: 10.11911/syztjs.2023018
    [2]JI Cheng, ZHAO Bing, LI Jianbin, LUO Pandeng, FANG Haoqing. Research of Temperature-Responsive Subsurface Self-Generated Proppant[J]. Petroleum Drilling Techniques, 2022, 50(4): 45-51. DOI: 10.11911/syztjs.2022078
    [3]ZHU Xiaohua, RAN Liang, JING Jun, SUN Hanweng, WANG Chengtao, ZHANG Yipeng. Research on Gas-Charging Water Depths and Gas-Charging Rates of Dual-Gradient Drilling with Gas-Charging in Risers[J]. Petroleum Drilling Techniques, 2022, 50(1): 22-29. DOI: 10.11911/syztjs.2021053
    [4]ZHU Zuyang, WU Haiyan, LI Yongjie, LI Fengbo. The Effect of Collar Structure on Acoustic Logging Response While Drilling[J]. Petroleum Drilling Techniques, 2016, 44(6): 117-122. DOI: 10.11911/syztjs.201606020
    [5]Liu Xiuquan, Chen Guoming, Song Qiang, Chang Yuanjiang, Xu Liangbin. Collapse Assessment for Deepwater Drilling Risers on the Basis of Finite Element Method[J]. Petroleum Drilling Techniques, 2015, 43(4): 43-47. DOI: 10.11911/syztjs.201504008
    [6]Sheng Leixiang, Wang Rongyao, Xu Liangbin, Jiang Shiquan, Zhou Jianliang. Safety Analysis of the Hang-off of Deepwater Drilling Risers during a Typhoon Emergency Period[J]. Petroleum Drilling Techniques, 2015, 43(4): 25-29. DOI: 10.11911/syztjs.201504005
    [7]Sui Xiuxiang, Liang Yufeng, Li Yiming, Yin Bangtang, Li Xiangfang. Early Monitoring of the Gas-Cut in Deepwater Riser Based on Doppler Measuring System[J]. Petroleum Drilling Techniques, 2014, 42(5): 90-94. DOI: 10.11911/syztjs.201405016
    [8]Yu Fu, Jin Yan, Chen Mian, Niu Chengcheng, Li Xiaoyi. Analysis of Response Characteristic of P-Wave Velocity in Abnormal Over-Pressure Formation[J]. Petroleum Drilling Techniques, 2014, 42(2): 23-27. DOI: 10.3969/j.issn.1001-0890.2014.02.005
    [9]Zhang Lei, Chang Yuanjiang, Liu Xiuquan, Liu Kang, Chen Liming. Recoil Analysis for Deepwater Drilling Riser after Emergency Disconnection with Blowout Preventer[J]. Petroleum Drilling Techniques, 2013, 41(3): 25-30. DOI: 10.3969/j.issn.1001-0890.2013.03.005
    [10]Xia Huanyu, Zhai Yinghu, An Yan, Cui Yongxing. The Effect of Boost Flow in Riser on the Wellbore Temperature in Deep Water Drilling[J]. Petroleum Drilling Techniques, 2012, 40(1): 32-36. DOI: 10.3969/j.issn.1001-0890.2012.01.007

  • Cited by

    Periodical cited type(8)

    1. 李欢，李鹏，白兰昌，范松，付俊. 隔水管张紧装置抗反冲控制算法适应性研究. 石油机械. 2020(04): 62-68 .
    2. 甘武祥，赵宏林，段梦兰. 深水钻井隔水管力学性能分析. 石油机械. 2018(03): 48-52 .
    3. 华勇，钱利勤，吴欣袁，夏成宇，涂忆柳，向正新，王杰. 深水钻井隔水管与地层管柱耦合力学分析. 石油机械. 2018(03): 29-34 .
    4. 王耀锋，王定亚，杨虎，陈雪娟，陈才虎，王爱民，李淑芳. 集成式隔水管安装试压工具开发与试验. 石油机械. 2018(01): 45-49 .
    5. 王冬石. 深水钻井隔水管系统关键技术研究与发展建议. 石油机械. 2018(07): 39-44 .
    6. 王志伟，张云腾，陈国明，赵建亭，田雪. 无隔水管钻井液返回管线对接接头设计与分析. 石油机械. 2018(09): 48-52 .
    7. 苏伟，孟帅，王俊雄，王震. 深海钻井立管系统紧急脱离反冲耦合效应研究. 装备环境工程. 2018(12): 40-44 .
    8. 左其川，刘宏亮，雷广进，淮超，侯晓东，王秉武，陈叶. 深水高压模拟试验舱的研制与应用. 石油机械. 2017(05): 52-56 .

    Other cited types(10)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (3709) PDF downloads (3964) Cited by(18)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return