Wang Lei, Zhang Hui, Zhou Yuyang, Ke Ke, Zhang Jinshuang, Peng Xing. Optimal Design of Hydraulic Parameters for Conductor Jetting in Deepwater Drilling[J]. Petroleum Drilling Techniques, 2015, 43(2): 19-24. DOI: 10.11911/syztjs.201502004
Citation: Wang Lei, Zhang Hui, Zhou Yuyang, Ke Ke, Zhang Jinshuang, Peng Xing. Optimal Design of Hydraulic Parameters for Conductor Jetting in Deepwater Drilling[J]. Petroleum Drilling Techniques, 2015, 43(2): 19-24. DOI: 10.11911/syztjs.201502004

Optimal Design of Hydraulic Parameters for Conductor Jetting in Deepwater Drilling

More Information
  • Received Date: July 17, 2014
  • Revised Date: November 19, 2014
  • Considering that there is no strong theory support to the design of hydraulic parameters in conductor jetting in deep water drilling, the calculation formulas of critical jet outlet velocity and flow rate in jetting were derived based on the water jetting theory and rock mechanics, by which an optimal design methods, criteria and procedures were presented, and investigated. The combination patterns of different bits and conductors used in jetting, showing that the critical jet flow rate was 69.5 L/s for the combination of φ660.4 mm bit and φ762.0 mm conductor, with 24.0 mm equivalent nozzle diameter, and the maximum breaking diameter was 762.0 mm when the nozzle diameter was 26.0-30.0 mm. Given constant jet flow rate, the smaller the equivalent nozzle diameter, the greater the breaking strength is. Taking the design of hydraulic parameters in deep water jetting drilling in JDZ Block, West Africa, as example, the error between designed and actual jet flow rates was less than 10% if φ14.3 mm nozzle was used. It proved that this optimal design method was reasonable and it could be effectively used in design of hydraulic parameters in deepwater conductor jetting operations.
  • [1]
    徐荣强,陈建兵,刘正礼,等.喷射导管技术在深水钻井作业中的应用[J].石油钻探技术,2007,35(3):19-22. Xu Rongqiang,Chen Jianbing Liu Zhengli,et al.The appliation of jetting technology in deepwater drilling[J].Petroleum Drilling Techniques,2007,35(3):19-22.
    [2]
    刘正礼,叶吉华,田瑞瑞,等.南海深水表层导管水下打桩安装 技术适应性分析[J].石油钻探技术,2014,42(1):41-45. Liu Zhengli,Ye Jihua,Tian Ruirui,et al.Adaptability of underwater tamping for deepwater drilling conductor installation in South China Sea[J].Petroleum Drilling Techniques,2014,42(1):41-45.
    [3]
    Jeanjean P.Re-assessment of p-y curves for soft clays from centrifuge testing and finite element modeling[R].OTC 20158,2009.
    [4]
    Templeton J S.Finite element analysis of conductor seafloor interaction[R].OTC 20197,2009.
    [5]
    Evans T G,Feyereisen S,Rheaume G.Axial capacities of jetted well conductors in Angola[R].OSIG-02-325,2002.
    [6]
    Akers T J.Jetting of structural casing in deepwater environments:job design and operational practices[R].SPE 102378,2008.
    [7]
    John D H,Rod A C,Robert P H,et al.Batch drilling and positioning of subsea wells in the South China Sea[R].SPE 29909,1995.
    [8]
    Robert P H,Rod A C,John D H,et al.Liuhua 11-1 development-subsea conductor installation in the South China Sea[R].OTC 8174,1996.
    [9]
    刘书杰,杨进,周建良,等.深水海底浅层喷射钻进过程中钻压与钻速关系[J].石油钻采工艺,2011,33(1):12-15. Liu Shujie,Yang Jin,Zhou Jianliang,et al.Research on relationship between weight-on-bit and drilling rate during jetting drilling in sub-bottom deepwater[J].Oil Drilling Production Technology,2011,33(1):12-15.
    [10]
    付英军,姜伟,朱荣东.深水表层导管安装方法及风险控制技术研究[J].石油天然气学报,2011,33(6):153-157. Fu Yingjun,Jiang Wei,Zhu Rongdong.Installation method and risk control technology of surface conductors[J].Journal of Oil and Gas Technology,2011,33(6):153-157.
    [11]
    汪顺文,杨进,严德,等.深水表层导管喷射钻进机理研究[J].石油天然气学报,2012, 34(8):157-160. Wang Shunwen,Yang Jin,Yan De,et al.Research of jetting drilling mechanism of surface conductor in deepwater[J].Journal of Oil and Gas Technology,2012,34(8):157-160.
    [12]
    Luke F E,Stephen C A,Roger N W,et al.Deepwater batchset operations through the magnolia shallow water flow sand[R].SPE 92289,2005.
    [13]
    路保平,李国华.西非深水钻井完井关键技术[J].石油钻探技术,2013, 41(3):1-6. Lu Baoping,Li Guohua.Key technologies for deepwater drilling completion in West Africa[J].Petroleum Drilling Techniques,2013,41(3):1-6.
  • Related Articles

    [1]XIAN Yuxi, CHEN Chaofeng, FENG Meng, HAO Youzhi. Numerical Simulation of Multiphase Flow in Fracture Networks in Shale Oil Reservoir[J]. Petroleum Drilling Techniques, 2021, 49(5): 94-100. DOI: 10.11911/syztjs.2021090
    [2]FENG Jin, CHI Shaolin, ZHANG Manlai, CHEN Wei, HUANG Xinyu. Optimal Design of a Downhole Seismic Generator[J]. Petroleum Drilling Techniques, 2020, 48(5): 120-126. DOI: 10.11911/syztjs.2020117
    [3]YANG Yingtao, WEN Qingzhi, DUAN Xiaofei, WANG Shuting, WANG Feng. Numerical Simulation for Flow Conductivity in Channeling Fractures[J]. Petroleum Drilling Techniques, 2016, 44(6): 104-110. DOI: 10.11911/syztjs.201606018
    [4]Chen Xiuping, Zou Deyong, Li Dongjie, Lou Erbiao. Numerical Simulation Study on the Anti-Balling Performance of PDC Drill Bits[J]. Petroleum Drilling Techniques, 2015, 43(6): 108-113. DOI: 10.11911/syztjs.201506020
    [5]Song Xianzhi, Li Gensheng, Wang Mengshu, Yi Can, Su Xinliang. Numerical Simulation on Cuttings Carrying Regularity for Horizontal Wells Drilled with Coiled Tubing[J]. Petroleum Drilling Techniques, 2014, 42(2): 28-32. DOI: 10.3969/j.issn.1001-0890.2014.02.006
    [6]Nie Xiangrong, Yang Shenglai. Numerical Simulation of Cooling Damage to High Pour-Point Oil Reservoirs[J]. Petroleum Drilling Techniques, 2014, 42(1): 100-104. DOI: 10.3969/j.issn.1001-0890.2014.01.020
    [7]Zhao Xinxin, Wu Xuefeng, Gao Yonghai, Li Hao, Guo Yanli. Numerical Simulation of Temperature Distribution of Blowout Preventers in Deepwater Drilling[J]. Petroleum Drilling Techniques, 2013, 41(3): 46-50. DOI: 10.3969/j.issn.1001-0890.2013.03.009
    [8]Xu Peng, Liu Xinyun, Shi Libao. Numerical Simulation for the Effect of Ground Stress on Explosive Fracturing[J]. Petroleum Drilling Techniques, 2013, 41(1): 65-69. DOI: 10.3969/j.issn.1001-0890.2013.01.013
    [9]Li Hongqian. Numerical Simulation on the Annular Flow Induced by Spiral Casing Centralizer[J]. Petroleum Drilling Techniques, 2012, 40(2): 25-29. DOI: 10.3969/j.issn.1001-0890.2012.02.005
    [10]Li Chunying, Wu Xiaodong. Numerical Simulation of Remaining Oil Distribution in Cyclothem[J]. Petroleum Drilling Techniques, 2012, 40(1): 88-91. DOI: 10.3969/j.issn.1001-0890.2012.01.018
  • Cited by

    Periodical cited type(6)

    1. 许期聪,陈东,冯思恒. 大排量直井段随钻测斜工具的研制与应用. 石油钻探技术. 2024(02): 174-180 . 本站查看
    2. 单玉奇,殷晓丹. 石油探井用流道转换器加工方法研究. 现代制造技术与装备. 2024(05): 118-120 .
    3. 杨恒灿,张玉霖,林颢屿,菅志军,鲍东升,黄玥. 旋转导向钻井系统三肋流道转换器设计研究. 石油矿场机械. 2024(06): 56-61 .
    4. 卢华涛,药晓江,王清华,丁元皓,菅光霄. 随钻测斜仪扶正器优化设计与流体仿真. 中国石油和化工标准与质量. 2022(10): 73-75 .
    5. 简旭,李皋,王军,韩旭,黄兵,王松涛. 气体钻井声波超前测距方法与数值模拟. 石油钻探技术. 2022(03): 132-138 . 本站查看
    6. 张正玉,袁军,李阳兵. 高强度高温高压直推存储式测井系统在超深井的应用. 石油钻探技术. 2022(05): 117-124 . 本站查看

    Other cited types(0)

Catalog

    Article Metrics

    Article views (3351) PDF downloads (4535) Cited by(6)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return