Citation: | LI Yongkang, JIA Yiyong, ZHANG Guangzhong, WANG Hongwan, CUI Yuhai. Research Progress and Development Suggestion of Stratified Acidizing Strings in Water Injection Wells of Shengli Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(3): 129-134. DOI: 10.11911/syztjs.2021030 |
[1] |
董卫兵. 中国东部老油田开发的实践探索与启示[J]. 会计之友,2011(1):122–124. doi: 10.3969/j.issn.1004-5937.2011.01.043
DONG Weibing. Practical exploration and enlightenment of the development of old oilfields in eastern China[J]. Friends of Accounting, 2011(1): 122–124. doi: 10.3969/j.issn.1004-5937.2011.01.043
|
[2] |
王增林. 胜利油田分层注水工艺技术研究与实践[J]. 油气地质与采收率,2018,25(6):1–6.
WANG Zenglin. Research and practice of separated layer water injection technology in Shengli Oilfield[J]. Petroleum Geology and Recovery Efficiency, 2018, 25(6): 1–6.
|
[3] |
安娜,罗攀登,李永寿,等. 碳酸盐岩储层深度酸压用固体颗粒酸的研制[J]. 石油钻探技术,2020,48(2):93–97. doi: 10.11911/syztjs.2020017
AN Na, LUO Pandeng, LI Yongshou, et al. Development of solid granular acid for the deep acid-fracturing of carbonate reservoirs[J]. Petroleum Drilling Techniques, 2020, 48(2): 93–97. doi: 10.11911/syztjs.2020017
|
[4] |
孙召勃,李云鹏,贾晓飞,等. 基于驱替定量表征的高含水油田注水井分层配注量确定方法[J]. 石油钻探技术,2018,46(2):87–91.
SUN Zhaobo, LI Yunpeng, JIA Xiaofei, et al. A method to determine the layered injection allocation rates for water injection wells in high water cut oilfield based on displacement quantitative characterization[J]. Petroleum Drilling Techniques, 2018, 46(2): 87–91.
|
[5] |
王国壮,梁承春,孙招锋,等. 红河油田长6特低渗油藏多元复合酸降压增注技术[J]. 石油钻探技术,2016,44(4):96–101.
WANG Guozhuang, LIANG Chengchun, SUN Zhaofeng, et al. Decompression and augmented injection technology with polybasic recombination acid for Chang-6 ultra-low permeability reservoir in Honghe Oilfield[J]. Petroleum Drilling Techniques, 2016, 44(4): 96–101.
|
[6] |
夏海帮. 页岩气井双暂堵压裂技术研究与现场试验[J]. 石油钻探技术,2020,48(3):90–96. doi: 10.11911/syztjs.2020065
XIA Haibang. The research and field testing of dual temporary plugging fracturing technology for shale gas wells[J]. Petroleum Drilling Techniques, 2020, 48(3): 90–96. doi: 10.11911/syztjs.2020065
|
[7] |
黎伟,夏杨,陈曦. RFID智能滑套设计与试验研究[J]. 石油钻探技术,2019,47(6):83–88. doi: 10.11911/syztjs.2019123
LI Wei, XIA Yang, CHEN Xi. Design and experimental study of an RFID intelligent sliding sleeve[J]. Petroleum Drilling Techniques, 2019, 47(6): 83–88. doi: 10.11911/syztjs.2019123
|
[8] |
马如然,刘音,常青. 油田压裂用暂堵剂技术[J]. 天然气与石油,2013,31(6):79–82. doi: 10.3969/j.issn.1006-5539.2013.06.022
MA Ruran, LIU Yin, CHANG Qing. New technology of diverting agents used in oilfield fracturing[J]. Natural Gas and Oil, 2013, 31(6): 79–82. doi: 10.3969/j.issn.1006-5539.2013.06.022
|
[9] |
张合文,黄先雄,杨平平,等. 协同转向酸化技术在让纳若尔油田的应用[J]. 石油钻采工艺,2014,36(2):101–104.
ZHANG Hewen, HUANG Xianxiong, YANG Pingping, et al. Synergitic diverted acidizing and its application in Zanazour Oilifeld[J]. Oil Drilling & Production Technology, 2014, 36(2): 101–104.
|
[10] |
NASR-EL-DIN H A, AL-ANAZI H A, MOHAMED S K. Stimulation of water-dispodal wells using acid-in-diesel emulsions: case histories[J]. SPE Production & Facilities, 2000, 15(3): 176–182.
|
[11] |
徐新华,唐海兵,胡正强,等. 小直径扩张式封隔器压裂管柱的研制与应用[J]. 石油机械,2018,46(9):81–86.
XU Xinhua, TANG Haibing, HU Zhengqiang, et al. Development and application of fracturing string with small diameter expandable packer[J]. China Petroleum Machinery, 2018, 46(9): 81–86.
|
[12] |
李国太. K344油层保护封隔器的研究与应用[J]. 石油机械,2009,37(6):55–57.
LI Guotai. Research and application of K344 reservoir protection packer[J]. China Petroleum Machinery, 2009, 37(6): 55–57.
|
[13] |
岳久红,马旭. 大斜度井水平井分层酸化工艺管柱及其应用[J]. 新疆石油天然气,2011,7(2):51–53. doi: 10.3969/j.issn.1673-2677.2011.02.013
YUE Jiuhong, MA Xu. Application of an acidcfication handicraft tubular column with layers in the highly deviated wells and the horizontall wells[J]. Xinjiang Oil & Gas, 2011, 7(2): 51–53. doi: 10.3969/j.issn.1673-2677.2011.02.013
|
[14] |
王磊. 高温高压分层酸化工艺管柱的研制与应用[J]. 内江科技,2018(1):18, 31.
WANG Lei. Development and application of high temperature and high pressure stratified acidizing process pipe string[J]. Neijiang Technology, 2018(1): 18, 31.
|
[15] |
李英,黎文才,崔绍江,等. Y241高压挤注封隔器的研制与应用[J]. 石油机械,2009,37(9):173–174.
LI Ying, LI wencai, CUI Shaojiang, et al. Development and application of Y241 high pressure squeeze packer[J]. China Petroleum Machinery, 2009, 37(9): 173–174.
|
[16] |
刘军,刘伟,陈曙光,等. 深井多级分层酸化管柱研制[J]. 石油矿场机械,2007,36(9):79–81. doi: 10.3969/j.issn.1001-3482.2007.09.024
LIU Jun, LIU Wei, CHEN Shuguang, et al. Study and development of staged pipe string for acidization in deep well[J]. Oil Field Equipment, 2007, 36(9): 79–81. doi: 10.3969/j.issn.1001-3482.2007.09.024
|
[17] |
王宏万,李永康,马艳洁,等. 分层酸化、注水一体化管柱的研制及应用[J]. 石油机械,2015,43(7):108–110.
WANG Hongwan, LI Yongkang, MA Yanjie, et al. Development and application of integrated separate layer acidification and water injection string[J]. China Petroleum Machinery, 2015, 43(7): 108–110.
|
[18] |
刘冬炎. 分酸分注一体化工艺在临盘油田的应用[J]. 清洗世界,2015,31(11):23–27. doi: 10.3969/j.issn.1671-8909.2015.11.006
LIU Dongyan. Application of integrated technology about layering acidification and layered water injection in Linpan Oilfield[J]. Cleaning World, 2015, 31(11): 23–27. doi: 10.3969/j.issn.1671-8909.2015.11.006
|
[19] |
任向阳,潘国辉,龙远强. 新型分层酸化管柱技术在江苏油田的应用[J]. 断块油气田,2008,15(4):120–122.
REN Xiangyang, PAN Guohui, LONG Yuanqiang. Application of tube column technology of new lamination acidification in Jiangsu Oilfield[J]. Fault-Block Oil & Gas Field, 2008, 15(4): 120–122.
|
[20] |
中国石油化工股份有限公司, 中国石油化工股份有限公司胜利油田分公司石油工程技术研究院.一种分层酸化与分注测调一体化管柱: CN201720955828.1[P].2018-03-16.
China Petroleum and Chemical Corporation, Research Institute of Petroleum Engineering Technology of Sinopec Shengli Oilfield Company. Layered acidification and layered water injection test and allocation integrated pipe string: CN201720955828.1[P]. 2018-03-16.
|
[21] |
李常友. 胜利油田测调一体化分层注水工艺技术新进展[J]. 石油机械,2015,43(6):66–70.
LI Changyou. New development of measurement and regulation integrated separate layer water injection technolagy in Shengli Oilfield[J]. China Petroleum Machinery, 2015, 43(6): 66–70.
|
[22] |
郭宏峰,杨树坤,段凯滨,等. 渤海油田可反洗测调一体分层注水工艺[J]. 石油钻探技术,2020,48(3):97–101.
GUO Hongfeng, YANG Shukun, DUAN Kaibin, et al. An improved integrated ieverse washing, measuring and adjusting zonal water injection process in the Bohai Oilfield[J]. Petroleum Drilling Techniques, 2020, 48(3): 97–101.
|
[23] |
杨玲智,刘延青,胡改星,等. 长庆油田同心验封测调一体化分层注水技术[J]. 石油钻探技术,2020,48(2):113–117.
YANG Lingzhi, LIU Yanqing, HU Gaixing, et al. Stratified water injection technology of concentric seal-check, logging and adjustment integration in Changqing Oilfield[J]. Petroleum Drilling Techniques, 2020, 48(2): 113–117.
|
[24] |
阮宏镁. 智能注水技术综述[J]. 内江科技,2018(11):60–66.
RUAN Hongmei. Summary of intelligent water injection technology[J]. Neijiang Technology, 2018(11): 60–66.
|
[25] |
孙金峰,张学超,李勇,等. 免投捞实时测控精细注水技术[J]. 石油机械,2017,45(1):81–84, 119.
SUN Jinfeng, ZHANG Xuechao, LI Yong, et al. Free-casting and fishing real-time measurement and control precise water injection technology[J]. China Petroleum Machinery, 2017, 45(1): 81–84, 119.
|
[26] |
贾庆升. 无线智能分层注采技术研究[J]. 石油机械,2019,47(7):99–104.
JIA Qingsheng. Intelligent separate layer injection and production technology based on wireless telemetry[J]. China Petroleum Machinery, 2019, 47(7): 99–104.
|
[1] | HU Sicheng, GUAN Zhichuan, LU Baoping, LIANG Deyang, HU Huaigang, YAN Yan, TAO Xinghua. Rock Breaking Process and Efficiency Analysis of Conical Cutting Teeth under Rotary and Torsional Impact[J]. Petroleum Drilling Techniques, 2021, 49(3): 87-93. DOI: 10.11911/syztjs.2021035 |
[2] | XIE Han, KUANG Yuchun, QIN Chao. The Finite Element Simulation and Test of Rock Breaking by Non-Planar PDC Cutting Cutter[J]. Petroleum Drilling Techniques, 2019, 47(5): 69-73. DOI: 10.11911/syztjs.2019043 |
[3] | SUN Xiaofeng, ZHANG Kebo, YUAN Yujin, NI Xiaodong, CHEN Ye. The Establishment and Correction of a Prediction Model for the Repose Angle of a Cuttings Bed in Highly Deviated Well Interval[J]. Petroleum Drilling Techniques, 2019, 47(4): 22-28. DOI: 10.11911/syztjs.2019039 |
[4] | WANG Weitao. Design and Test of a New PDC Bit with Tapered Auxiliary Cutter for Heterogeneous Formations[J]. Petroleum Drilling Techniques, 2018, 46(2): 58-62. DOI: 10.11911/syztjs.2018046 |
[5] | LAN Chengyu, DING Yuqi, LIU Jubao, DAI Ziwei, ZHOU Huiyu, LIU Yuxi. Force Analysis and Test of Bridge Plug Drilling[J]. Petroleum Drilling Techniques, 2018, 46(1): 68-74. DOI: 10.11911/syztjs.2018032 |
[6] | LIN Siyuan, LI Zhong, HUANG Yi, CHEN Haodong, YANG Yuhao, GAO Jiji. Technique for Enhancing the Rate of Penetration through the Application of a New PDC Bit with Rotary Cutters in Deep Formations in the Wenchang Block[J]. Petroleum Drilling Techniques, 2017, 45(6): 65-69. DOI: 10.11911/syztjs.201706012 |
[7] | WANG Fangxiang, WANG Ruihe, ZHOU Weidong, LI Luopeng. Theoretical Study and Experimental Tests of Rock Breaking Depth under Particle Impacting[J]. Petroleum Drilling Techniques, 2016, 44(6): 36-41. DOI: 10.11911/syztjs.201606006 |
[8] | FENG Yijing, ZHANG Laibin, ZHENG Wenpei, DENG Rong, FENG Ding. A Simulation Study on the Cutter Loads on the End Face of DTH Bits[J]. Petroleum Drilling Techniques, 2016, 44(3): 77-82. DOI: 10.11911/syztjs.201603014 |
[9] | Kuang Yuchun, Chen Yuzhong, Tu Junwen, Zhang Zhi. Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN[J]. Petroleum Drilling Techniques, 2014, 42(4): 111-115. DOI: 10.3969/j.issn.1001-0890.2014.04.021 |