Force Analysis and Test of Bridge Plug Drilling

LAN Chengyu; DING Yuqi; LIU Jubao; DAI Ziwei; ZHOU Huiyu; LIU Yuxi

doi:10.11911/syztjs.2018032

Volume 46 Issue 1

Jan. 2018

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2018 > 46(1): 68-74. > DOI: 10.11911/syztjs.2018032

LAN Chengyu, DING Yuqi, LIU Jubao, DAI Ziwei, ZHOU Huiyu, LIU Yuxi. Force Analysis and Test of Bridge Plug Drilling[J]. Petroleum Drilling Techniques, 2018, 46(1): 68-74. DOI: 10.11911/syztjs.2018032

Citation:

PDF (1212 KB)

Force Analysis and Test of Bridge Plug Drilling

1.
College of Mechanical Science and Engineering, Northeast Petroleum University, Daqing, Heilongjiang, 163318, China;
2.
Downhole Service Company, PetroChina Daqing Oilfield Co. Ltd., Daqing, Heilongjiang, 163453, China

More Information

Received Date: June 08, 2017
Revised Date: October 31, 2017

Graphical Abstract

Abstract

Abstract

To quantitatively control weights on bit(WOBs) and torques of the coiled tubing bit in the drilling of a bridge plug,and to eliminate problems related to oversize cuttings during the process,mechanical analyses were performed for the cutting of the compound bridge plug.By constructing the mechanical model for the cutting of bridge plug by the coiled tubing bit,the relationships among WOBs,drilling depths,torques and cutting volumes were analyzed to derive the dynamic equation for WOBs,torques and cutting depths.To confirm the accuracy of relevant calculation results,field tests were conducted in two wells to drill 9 bridge plugs.Test results showed the maximum relative error between calculation result and field application result was 15%,which was sufficient to satisfy accuracy demands at the expected plug-drilling depths.Research results showed the newly derived mechanical analyzing model for coil tubing bit to cut bridge plug could accurately high light correlation among WOBs,torques and cutting depths.The model is great significance to control the WOBs and torques in bridge plug drilling.
- coiled tubing,
- bit,
- bridge plug,
- weight on bit,
- torque,
- cutting depth

FullText(HTML)

References (13)

References

[1]	来国荣,安崇清,范琳沛.水平井连续油管钻磨桥塞技术分析及应用[J].石油工业技术监督,2016,32(1):54-57. LAI Guorong,AN Chongqing,FAN Linpei.Analysis and application of coiled tubing bridge plug drilling and grinding technology for horizontal well[J].Technology Supervision in Petroleum Industry,2016,32(1):54-57.
[2]	张文志.大庆油田水平井复合桥塞钻磨工艺技术研究与应用[J].内蒙古石油化工,2014,40(12):109-110. ZHANG Wenzhi.Research and application of compound bridge plug drilling and grinding technology for horizontal well in Daqing Oilfield[J].Inner Mongolia Petrochemical Industry,2014,40(12):109-110.
[3]	VIRUES C,WANG A,PYECROFT J,et al.Performance of plugless toe stages and non-isolated wellbore in multi-stage hydraulic fractured 10 well half pad in the Canadian Shale Gas Horn River Basin[R].SPE 179128,2016.
[4]	刘威,何青,张永春,等.可钻桥塞水平井分段压裂工艺在致密低渗气田的应用[J].断块油气田,2014,21(3):394-397. LIU Wei,HE Qing,ZHANG Yongchun. Application of drillable bridging plug staged fracturing technology for horizontal well in low permeability and tight gas field[J].Fault-Block Oil Gas Field,2014,21(3):394-397.
[5]	Asaad Mohamed Negm,Ahmed Bahgat Al Kholy,Ahmed Abdulla Al Mutawa,et al.Pioneer step in securing gas well with through tubing retrievable bridge plug under highly complex circumstance (1st time in the Middle East)[R].SPE 166780,2013.
[6]	尹丛彬,叶登胜,段国彬,等.四川盆地页岩气水平井分段压裂技术系列国产化研究及应用[J].天然气工业,2014,34(4):67-71. YIN Congbin,YE Dengsheng,DUAN Guobin,et al.Research about and application of autonomous staged fracturing technique series for horizontal well stimulation of shale gas reservoirs in the Sichuan Basin[J].Natural Gas Industry,2014,34(4):67-71.
[7]	尚琼,王伟佳,王汤,等.连续油管钻复合桥塞工艺研究[J].钻采工艺,2016,39(1):68-71. SHANG Qiong,WANG Weijia,WANG Tang,et al.Research on milling technology of one CP through CT[J].Drilling Production Technology,2016,39(1):68-71.
[8]	MITTIGA V,MARTOCCHIA F,CARPINETA G,et al.Multi frac in horizontal HT wells:plug and perf technique application on sandstone gas reservoir,onshore Pakistan[R].IPTC 17995,2014.
[9]	逄仁德,崔莎莎,韩继勇,等.水平井连续油管钻磨桥塞工艺研究与应用[J].石油钻探技术,2016,44(1):57-62. PANG Rende,CUI Shasha,HAN Jiyong,et al.Research and application of drilling,milling-grinding techniques for drilling out composite bridge plugs in coiled tubing in horizontal wells[J].Petroleum Drilling Techniques,2016,44(1):57-62.
[10]	席仲琛,徐迎新,曹欣.水平井油管钻磨复合桥塞技术及应用[J].石油钻采工艺,2016,38(1):123-127. XI Zhongchen,XU Yingxin,CAO Xin.Composite bridge plug drilling and milling technology by tubing in horizontal well and its application[J].Oil Drilling Production Technology,2016,38(1):123-127.
[11]	李官华,伍贤柱,李朝阳,等.四川非常规气田开发主要钻井技术及其应用效果[J].天然气工业,2015,35(9):83-88. LI Guanhua,WU Xianzhu,LI Chaoyang,et al.The key drilling technologies in unconventional gas field development in Sichuan and their application effects[J].Natural Gas Industry,2015,35(9):83-88.
[12]	王先兵,易炳刚,欧阳伟,等.低渗透储层多级架桥暂堵储层保护技术[J].天然气工业,2013,33(7):85-89. WANG Xianbing,YI Binggang,OUYANG Wei,et al.Multi-level bridge plugging for the protection of low-permeability reservoirs[J].Natural Gas Industry,2013,33(7):85-89.
[13]	李田军.PDC钻头破碎岩石的力学分析与机理研究[D].北京:中国地质大学(北京),2012. LI Tianjun.Mechanical analysis and fragmentation mechanism of PDC bits drilling rock[D].Beijing:China University of Geosciences(Beijing),2012.

[1]	XIE Han, KUANG Yuchun, QIN Chao. The Finite Element Simulation and Test of Rock Breaking by Non-Planar PDC Cutting Cutter[J]. Petroleum Drilling Techniques, 2019, 47(5): 69-73. DOI: 10.11911/syztjs.2019043
[2]	WANG Weitao. Design and Test of a New PDC Bit with Tapered Auxiliary Cutter for Heterogeneous Formations[J]. Petroleum Drilling Techniques, 2018, 46(2): 58-62. DOI: 10.11911/syztjs.2018046
[3]	LIN Siyuan, LI Zhong, HUANG Yi, CHEN Haodong, YANG Yuhao, GAO Jiji. Technique for Enhancing the Rate of Penetration through the Application of a New PDC Bit with Rotary Cutters in Deep Formations in the Wenchang Block[J]. Petroleum Drilling Techniques, 2017, 45(6): 65-69. DOI: 10.11911/syztjs.201706012
[4]	TENG Xueqing, DI Qinfeng, LI Ning, CHEN Feng, ZHOU Bo, WANG Min. Measurement and Analysis of Stick-Slip Characteristics of Drill String in Ultra-Deep Wells[J]. Petroleum Drilling Techniques, 2017, 45(2): 32-39. DOI: 10.11911/syztjs.201702006
[5]	WANG Fangxiang, WANG Ruihe, ZHOU Weidong, LI Luopeng. Theoretical Study and Experimental Tests of Rock Breaking Depth under Particle Impacting[J]. Petroleum Drilling Techniques, 2016, 44(6): 36-41. DOI: 10.11911/syztjs.201606006
[6]	LI Dianwei, YANG Zhongfu, DI Baiying, CHEN Shaoyun, WANG Jianyan. Drag and Torque Reducing Techniques on S-Shaped Directional Wells of the Rumaila Oilfield[J]. Petroleum Drilling Techniques, 2016, 44(5): 22-27. DOI: 10.11911/syztjs.201605004
[7]	FENG Yijing, ZHANG Laibin, ZHENG Wenpei, DENG Rong, FENG Ding. A Simulation Study on the Cutter Loads on the End Face of DTH Bits[J]. Petroleum Drilling Techniques, 2016, 44(3): 77-82. DOI: 10.11911/syztjs.201603014
[8]	Zou Deyong, Guo Yulong, Zhao Jian, Chen Xiuping, Wang Jiajun, Yu Jinping. Experimental Study on Rock Breaking of Conical PDC Cutter[J]. Petroleum Drilling Techniques, 2015, 43(1): 122-125. DOI: 10.11911/syztjs.201501021
[9]	Kuang Yuchun, Chen Yuzhong, Tu Junwen, Zhang Zhi. Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN[J]. Petroleum Drilling Techniques, 2014, 42(4): 111-115. DOI: 10.3969/j.issn.1001-0890.2014.04.021

Cited By

Cited by

Periodical cited type(2)

1.	沈如芳，马卫国，陈婷. 基于ABAQUS的复合桥塞钻削仿真及其性能分析. 石油机械. 2020(02): 42-47+79 .
2.	胡琴，李志强，任航. 模糊正交法在弧形盘式齿破岩性能评价中的应用. 断块油气田. 2019(03): 389-393 .

Other cited types(1)

Get Citation

PDF

XML

Article Metrics

Article views (4573) PDF downloads (3828) Cited by(3)

Force Analysis and Test of Bridge Plug Drilling

Abstract

References

Related Articles

Cited by

Periodical cited type(2)

Other cited types(1)

Catalog

Article Metrics

Related

Force Analysis and Test of Bridge Plug Drilling

Abstract

References

Related Articles

Cited by

Periodical cited type(2)

Other cited types(1)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content