Citation: | JU Ran, GUAN Zhichuan, HUANG Yi, LUO Ming, LI Wentuo, DENG Wenbiao. Optimization of the Casing-Wellbore Gap in Complex Strata of the Ying-Qiong Basin, South China Sea[J]. Petroleum Drilling Techniques, 2019, 47(1): 32-36. DOI: 10.11911/syztjs.2019003 |
The goal of this study was to eliminate well hazards and drilling problems associated with wide pressure fluctuations encountered in complex strata in the Ying-Qiong Basin of the South China Sea. This basin is characterized by its high temperature and high pressure strata, complex geological structure and narrow drilling mud window. In order to prevent complex downhole events such as circulation lost, overflow and even blowout induced from pressure fluctuations during casing RIH, a calculation model of pressure fluctuation during casing RIH was established on the basis of a full investigation over the common casing program in the Ying-Qiong Basin of the South China Sea, and the optimization over the casing-wellbore gap was conducted by combining annulus pressure analysis during casing RIH and cementing job under different factors. The casing-wellbore gap of the fifth spud section of Well LD10-2-x subject to narrow safe mud window was optimized, and reasonable gap in that section was defined to be 15.00-19.55 mm. The actual casing-wellbore gap in Well LD10-2-x was 17.45 mm within the reasonable gap range, and the casing was run in the borehole with no downhole events such as circulation lost and overflow during the cementing. This indicated that the casing-wellbore gap could be optimized according to surge pressure during casing RIH, as well as annulus pressure during casing RIH and cementing, which would provide a reference in the casing program design in the Ying-Qiong Basin of the South China Sea.
[1] |
周开吉, 钟兵, 袁其骥, 等. 拟瞬态井内波动压力预测模型[J]. 西南石油学院学报, 1995, 17(4): 58–64 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500552965
ZHOU Kaiji, ZHONG Bing, YUAN Qiji, et al. A prediction model for quasi-momentary state well fluctuation pressure[J]. Journal of Southwestern Petroleum Institution, 1995, 17(4): 58–64 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500552965
|
[2] |
钟兵, 周开吉, 谢清华. 偏心环空中稳态波动压力的理论研究[J]. 西南石油学院学报, 1995, 17(1): 38–45 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500552913
ZHONG Bing, ZHOU Kaiji, XIE Qinghua. Theoretical study of steady-state surge and swab pressure in eccentric annulus[J]. Journal of Southwestern Petroleum Institution, 1995, 17(1): 38–45 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500552913
|
[3] |
樊洪海, 褚元林, 刘希圣. 起下钻时井眼内动态波动压力的预测[J]. 石油大学学报(自然科学版), 1995, 19(5): 36–41 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500482437
FAN Honghai, CHU Yuanlin, LIU Xisheng. Prediction for wellbore dynamic surge pressure while tripping a drillpipe[J]. Journal of the University of Petroleum, China(Edition of Natural Science), 1995, 19(5): 36–41 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500482437
|
[4] |
樊洪海. 起下钻动态波动压力应用软件开发[J]. 石油钻探技术, 1995, 23(4): 11–14, 60 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500768254
FAN Honghai. Development of application software for dynamic surge pressure while tripping[J]. Petroleum Drilling Techniques, 1995, 23(4): 11–14, 60 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199500768254
|
[5] |
汪海阁, 刘希圣. 定向井倾斜井段环空中幂律流体的稳态波动压力[J]. 石油大学学报(自然科学版), 1996, 20(1): 29–33 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600509213
WANG Haige, LIU Xisheng. Solution of surge pressure of power-law fluid in the deviated sections of directional well[J]. Journal of the University of Petroleum(Edition of Natural Science), 1996, 20(1): 29–33 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600509213
|
[6] |
樊洪海, 刘希圣. 赫谢尔-巴尔克莱液体直井稳态波动压力计算模式[J]. 石油钻探技术, 1994, 22(1): 51–54, 70
FAN Honghai, LIU Xisheng. The steady surge pressure calculation model of Herschel Bulkely fluid in straight wells[J]. Petroleum Drilling Techniques, 1994, 22(1): 51–54, 70
|
[7] |
王超,李军,柳贡慧,等. 钻井开停泵井底波动压力变化特征研究[J]. 石油钻探技术, 2018, 46(4): 47–53 doi: 10.3321/j.issn:0253-2697.1998.03.020
WANG Chao, LI Jun, LIU Gonghui, et al. Study on the fluctuation of bottomhole pressure while starting and stopping the drilling pump[J]. Petroleum Drilling Techniques, 2018, 46(4): 47–53 doi: 10.3321/j.issn:0253-2697.1998.03.020
|
[8] |
彭齐,樊洪海,刘劲歌,等. 起下钻过程中井筒稳态波动压力计算方法[J]. 石油钻探技术, 2016, 44(4): 35–40 doi: 10.3863/j.issn.1674-5086.1999.01.013
PENG Qi, FAN Honghai, LIU Jinge, et al. Improved calculation of wellbore steady fluctuation pressure in tripping operations[J]. Petroleum Drilling Techniques, 2016, 44(4): 35–40 doi: 10.3863/j.issn.1674-5086.1999.01.013
|
[9] |
谢国民, 何开平, 喻先进, 等. 小井眼波动压力影响因素分析[J]. 天然气工业, 2001, 21(3): 39–41 doi: 10.3321/j.issn:1000-0976.2001.03.011
XIE Guomin, HE Kaiping, YU Xianjin, et al. An analysis of the factors influencing surge pressure in a slim hile[J]. Natural Gas Industry, 2001, 21(3): 39–41 doi: 10.3321/j.issn:1000-0976.2001.03.011
|
[10] |
吴雪平, 金业权. 修正的稳态波动压力计算法在狭窄环空下套管中的应用[J]. 重庆科技学院学报(自然科学版), 2005, 7(2): 25–27 doi: 10.3969/j.issn.1673-1980.2005.02.008
WU Xueping, JIN Yequan. The application of modified steady-state wave pressure calculation in narrow annlar case structure[J]. Journal of Chongqing University of Science and Technology (Natural Science Edition), 2005, 7(2): 25–27 doi: 10.3969/j.issn.1673-1980.2005.02.008
|
[11] |
江梦娜. 井身结构设计中钻井液附加密度的选取准则分析[D]. 青岛: 中国石油大学(华东), 2013: 20.
JIANG Mengna. Analysis of the additional mud density critieria during the casing program design[D]. Qingdao: China University of Petroleum (Huadong), 2013: 20.
|
[12] |
福克斯. 管网中不稳定流动的水力分析[M]. 陈祖泽, 译. 北京: 石油工业出版社, 1983: 83.
FOCUS J A. Hydraulic analysis of unsteady flow in pipe network[M]. CHEN Zuze, translated. Beijing: Petroleum Industry Press, 1983: 83.
|
[13] |
王凯. 水平井井筒压力计算研究[D]. 青岛: 中国石油大学(华东), 2009: 59–67.
WANG Kai. Research on calculation of wellbore pressure in horizontal well[D]. Qingdao: China University of Petroleum (Huadong), 2009: 59–67.
|
[14] |
ZUBER N, FINDLAY J A. Average volumetric concentration in two-phase flow system[J]. Journal of Heat Transfer, 1965, 87(4): 453–468 doi: 10.1115/1.3689137
|
[1] | YU Libin, ZHANG Zhigang, JIANG Zhaomin, XU Hui, ZHANG Hongfu, HAN Xurui. Development and Field Testing of the Bionic Peristaltic Drilling Tool[J]. Petroleum Drilling Techniques, 2025, 53(1): 55-59. DOI: 10.11911/syztjs.2024113 |
[2] | HUANG Feng, CHEN Shichun, LIU Lichao, GUO Chao, LIU Yibin, SHI Yucai. Development and Field Test of BH-VDT3000 Vertical Drilling System[J]. Petroleum Drilling Techniques, 2024, 52(6): 62-68. DOI: 10.11911/syztjs.2024114 |
[3] | LIU Pingquan, LI Leibing, SHI Yucen, HAN Long. Research and Field Test of Electrically Controlled Sidewall Deep Penetrating Perforating Technology[J]. Petroleum Drilling Techniques, 2021, 49(3): 55-61. DOI: 10.11911/syztjs.2021055 |
[4] | ZHOU Jianping, YANG Zhanwei, XU Minjie, WANG Liwei, YAO Maotang, GAO Ying. Research and Field Tests of Weighted Fracturing Fluids with Industrial Calcium Chloride and Guar Gum[J]. Petroleum Drilling Techniques, 2021, 49(2): 96-101. DOI: 10.11911/syztjs.2021014 |
[5] | XIE Han, KUANG Yuchun, QIN Chao. The Finite Element Simulation and Test of Rock Breaking by Non-Planar PDC Cutting Cutter[J]. Petroleum Drilling Techniques, 2019, 47(5): 69-73. DOI: 10.11911/syztjs.2019043 |
[6] | SU Zhenguo, TANG Zhijun. The Design and Field Testing of Two-Stage and Two-Speed Drilling Tools[J]. Petroleum Drilling Techniques, 2019, 47(1): 59-64. DOI: 10.11911/syztjs.2019010 |
[7] | YANG Haibo, HOU Ting, FENG Dejie, TENG Zhaozheng, WU Liugen. Research and Field Test of Non-Drilling Plug Expandable Casing Patching Technology[J]. Petroleum Drilling Techniques, 2017, 45(5): 73-77. DOI: 10.11911/syztjs.201705013 |
[8] | ZHENG Xiaozhi, GU Lei, MA Lanrong, ZHANG Guoan. Performance and Field Tests of Rotary Expandable Liner Hanger[J]. Petroleum Drilling Techniques, 2016, 44(3): 55-60. DOI: 10.11911/syztjs.201603010 |
[9] | Wang Zaiming, Zhu Kuanliang, Feng Jinghai, Wu Yan, Shen Yuanyuan. Development and Field Test of High-Temperature Gel Valve[J]. Petroleum Drilling Techniques, 2015, 43(4): 78-82. DOI: 10.11911/syztjs.201504014 |
[10] | Yang Liqiang, Ba Lujun, Xue Jiangping. Development and Field Experiment on PDM with Uniform Wall Thickness[J]. Petroleum Drilling Techniques, 2012, 40(2): 109-112. DOI: 10.3969/j.issn.1001-0890.2012.02.021 |
1. |
张诗峥,赵东雅,王文博. 基于热力耦合仿真的PDC齿磨损特性及破岩机理研究. 石油矿场机械. 2025(03): 40-48 .
![]() | |
2. |
陈炼,魏小虎,曹强,周岩,杨迎新,胡川,赵志杰,伍彬. 凸棱非平面聚晶金刚石齿的破岩机理及在含砾地层中的应用. 中国机械工程. 2024(02): 371-379 .
![]() | |
3. |
荣准,杨学军,张航,颜爽,张琦,张龙龙. 五宝场硬塑性地层斧形曲面PDC齿破岩性能研究. 钻探工程. 2024(02): 85-93 .
![]() | |
4. |
李基伟,李乾,田胜雷,黄达,李玉梅,席岩. 东海深部高研磨地层冲击钻井PDC齿优选研究. 石油机械. 2024(08): 77-84 .
![]() | |
5. |
谢志涛,赵宇璇,郭勇,吴德胜,李亚东. 脊形PDC齿的机械性能和破岩效果. 金刚石与磨料磨具工程. 2024(05): 599-606 .
![]() | |
6. |
程伟,幸雪松,楼一珊,朱亮,尹彪. 三棱形PDC齿破岩特性数值模拟研究. 石油机械. 2024(11): 21-28 .
![]() | |
7. |
刘伟吉,阳飞龙,董洪铎,程润,祝效华. 异形PDC齿混合切削破碎花岗岩特性研究. 工程力学. 2023(03): 245-256 .
![]() | |
8. |
李涛,苏强,杨哲,徐卫强,胡锡辉. 川西地区超深井钻井完井技术现状及攻关方向. 石油钻探技术. 2023(02): 7-15 .
![]() | |
9. |
王勇军,梁伟,张涛,杜志强,王磊,佟铮. 深部地热钻探中硬塑性泥岩地层钻头应用研究. 钻探工程. 2023(03): 92-98 .
![]() | |
10. |
盛勇,刘川福,赵亮,丁峰,唐斌,闵鹏. 塔里木盆地HT区块难钻白云岩地层提速技术. 化学工程与装备. 2023(05): 75-77 .
![]() | |
11. |
王勇军,聂德久,张涛,冯守涛,邸佳强,王磊,佟铮. 雄安新区D19地热勘探井钻探技术及成果. 钻探工程. 2023(S1): 299-304 .
![]() | |
12. |
吴泽兵,席凯凯,赵海超,黄海,张文超,杨晨娟. 仿生PDC齿旋转破岩时的温度场和破岩特性模拟研究. 石油钻探技术. 2022(02): 71-77 .
![]() |