Volume 42 Issue 3
May  2014
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Hu Fengjin. Discussion on the Handle Position of Three Position Four Way Steering Valve on Remote Control Console of Well Control Equipment[J]. Petroleum Drilling Techniques, 2014, 42(3): 8-12. DOI: 10.3969/j.issn.1001-0890.2014.03.002
Citation: Hu Fengjin. Discussion on the Handle Position of Three Position Four Way Steering Valve on Remote Control Console of Well Control Equipment[J]. Petroleum Drilling Techniques, 2014, 42(3): 8-12. DOI: 10.3969/j.issn.1001-0890.2014.03.002
shu

Discussion on the Handle Position of Three Position Four Way Steering Valve on Remote Control Console of Well Control Equipment

  • Greatwall Drilling Corporation, CNPC, Beijing, 100101, China

More Information
  • Received Date: September 24, 2013
  • Revised Date: January 14, 2014
    Graphical Abstract
    • Abstract
  • Practitioners in the oil industry are divided over whether the handle of the three-position,four-way steering valve on remote control console of well control equipment should be put in neutral or working position.Based on the working principle of the equipment parts,the effect of different handle positions on the reliability and life span of hydraulic parts was analyzed,and the advantages and disadvantages of different handle positions were compared from the perspective of visual management,operating procedure and error probability.It was concluded that when the handle was in working position,the pipe pressure would be always be in the designed range of the equipment,without significant fluctuation,reducing the negative effect on the reliability and life span of hydraulic parts.Moreover,this position could also make visual management more direct and reduce operation procedures.Therefore it was concluded that the handle position of three-position,four-way steering valve was better in working position than in neutral position,which could reduce operational errors and extend life span of well control equipment.
    • FullText(HTML)
    • References (11)
  • [1]
    张桂林.关于两个井控争议问题的讨论[J].石油钻探技术, 2011, 39(5):8-13. Zhang Guilin.Discussion of two controversial issues on well control[J].Petroleum Drilling Techniques, 2011, 39(5):8-13.
    [2]
    孙孝真.实用井控手册[M].2版.北京:石油工业出版社, 2013:58-60. Sun Xiaozhen.Common well control hazards[M].2nd ed.Beijing:Petroleum Industry Press, 2013:58-60.
    [3]
    颜廷杰.实用井控技术[M].北京:石油工业出版社, 2010:116. Yan Tingjie.Practical well control technology[M].Beijing:Petroleum Industry Press, 2010:116.
    [4]
    张桂林, 张之悦, 颜廷杰.井下作业井控技术[M].北京:中国石化出版社, 2010:96. Zhang Guilin, Zhang Zhiyue, Yan Tingjie.Well control technology of downhole operation[M].Beijing:China Petrochemical Press, 2010:96.
    [5]
    Q/SY 1552—2012 钻井井控技术规范[S]. Q/SY 1552—2012 Specification for well control technology of drilling[S].
    [6]
    Q/SY 1553—2012 井下作业井控技术规范[S]. Q/SY 1553—2012 Specification for well control technology of downhole operation[S].
    [7]
    SY/T 5964—2006 钻井井控装置组合配套安装调试与维护[S]. SY/T 5964—2006 Combination installation adjustment and maintenance of well-control equipments[S].
    [8]
    中国石化集团公司井控培训教材编写组.钻井井控设备[M]. 东营:中国石油大学出版社, 2008:80. Writing Group of Sinopec Group Well Control Training Materials.Well control equipment of drilling[M].Dongying:China Petroleum University Press, 2008:80.
    [9]
    《石油天然气钻井井控》编写组.石油天然气钻井井控[M].北京:石油工业出版社, 2008:205. Writing Group of Oil Gas Drilling Well Control.Oil gas drilling well control[M].Beijing:Petroleum Industry Press, 2008:205.
    [10]
    《辽河油田钻井井控实施细则》编写小组.辽河油田钻井井控实施细则[M].盘锦:辽河油田公司, 2009:13. Writing Group of Well Control Detailed Rules of Liaohe Oilfield.Well control detailed rules of Liaohe Oilfield[M].Panjin:Liaohe Oilfield Company, 2009:13.
    [11]
    《新疆油田钻井井控实施细则》编写小组.新疆油田钻井井控实施细则[M].2012版.克拉玛依:新疆油田公司, 2012:14. Writing Group of Well Control Detailed Rules of Xinjiang Oilfield.Well control detailed rules of Xinjiang Oilfield[M].2012 ed.Karamay:Xinjiang Oilfield Company, 2012:14.
    • Related Articles

  • Related Articles

    [1]LI Ran, LI Wenzhe, ZHANG Jiayin, LIU Yang. Drilling Fluid Technology for Ultra-Large Wellbore in the Upper Part of 10 000-Meter Deep Well SDCK1[J]. Petroleum Drilling Techniques, 2024, 52(2): 93-99. DOI: 10.11911/syztjs.2024040
    [2]ZHANG Hongfeng. Hydraulic Shaping Technology of Deformed Casing after Fracturing in Horizontal Shale Oil Wells[J]. Petroleum Drilling Techniques, 2023, 51(5): 173-178. DOI: 10.11911/syztjs.2023055
    [3]WEI Zanqing, TIAN Zhibin, YANG Gengjia, PENG Jiale. Design and Application of a Hydraulic Rotary Sidewall Coring Tool at High Temperatures[J]. Petroleum Drilling Techniques, 2023, 51(3): 73-82. DOI: 10.11911/syztjs.2023042
    [4]YU Guimin, XU Liangbin, XIE Renjun, SHENG Leixiang, HE Dongsheng. Transmission Characteristics of Downhole Hydraulic Control Signalsin Intelligent Wells[J]. Petroleum Drilling Techniques, 2022, 50(6): 98-106. DOI: 10.11911/syztjs.2022099
    [5]ZHAO Guangyuan, WANG Tianhui, YANG Shukun, LI Xiang, LV Guosheng, DU Xiaoxia. Key Optimization Technologies of Intelligent Layered Water Injection with Hydraulic Control in Bohai Oilfield[J]. Petroleum Drilling Techniques, 2022, 50(1): 76-81. DOI: 10.11911/syztjs.2021125
    [6]ZHANG Hongbao. The Development and Application of a High Efficiency Hydraulic Casing Restoration Tool[J]. Petroleum Drilling Techniques, 2016, 44(3): 101-104. DOI: 10.11911/syztjs.201603018
    [7]Zhang Guilin. Handle Position of the Three-Position Four-Way Directional Control Valve on the Remote Control Console of BOP[J]. Petroleum Drilling Techniques, 2014, 42(6): 8-12. DOI: 10.11911/syztjs.201406002
    [8]Ma Mingxin, Yang Haibo, Xu Xin. Application of Hydraulic Centralizer in Unconventional Oil Well Cementing of Shengli Oilfield[J]. Petroleum Drilling Techniques, 2014, 42(1): 71-74. DOI: 10.3969/j.issn.1001-0890.2014.01.014
    [9]Jin Yequan, Sun Zeqiu, Liu Gang. Simulation Analysis and Experimental Study of Managed Pressure Drilling Hydraulic Throttle Pressure Control System[J]. Petroleum Drilling Techniques, 2013, 41(2): 109-113. DOI: 10.3969/j.issn.1001-0890.2013.02.021
    [10]Lan Zhigang. Failure Mechanism of Two-Way Hydraulic Shock Absorbers and Improvement Measures[J]. Petroleum Drilling Techniques, 2012, 40(2): 104-108. DOI: 10.3969/j.issn.1001-0890.2012.02.020

  • Cited by

    Periodical cited type(6)

    1. 叶秀茹，汪万飞，付红. 原位二氧化碳泡沫驱提高采收率实验. 油田化学. 2024(01): 108-115+178 .
    2. 张志军，王晓超，魏俊，石端胜，陈增辉，华科良. 基于注采参数的地下生泡调剖效果影响因素分析. 非常规油气. 2024(06): 58-66 .
    3. 曹小朋，熊英，冯其红，赵乐坤，张世明，刘同敬，王森，杨雨萱. 低渗透-致密油藏CO_2驱油与封存协同评价方法. 油气地质与采收率. 2023(02): 44-52 .
    4. 郑玉飞，李翔，刘文辉，冯轩，宫汝祥，王硕. 海上砂岩油藏注自生CO_2体系实验及提高采收率机理. 大庆石油地质与开发. 2023(04): 113-121 .
    5. 王晓超，魏俊，张海波，张志军，罗珊，王艳霞. 海上中深层油藏层内生气调剖效果评价及分析. 复杂油气藏. 2023(04): 449-454 .
    6. 苑登御. N_2泡沫/CO_2复合吞吐提高采收率三维物理模拟试验研究. 石油钻探技术. 2022(06): 126-132 . 本站查看

    Other cited types(1)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (2872) PDF downloads (3447) Cited by(7)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return