Volume 41 Issue 6
Nov.  2013
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Zhang Su, Guan Zhichuan, Wang Jianyun, Shi Yucai, Wei Jiehong. Impact of Casing on Adjacent Well Azimuth[J]. Petroleum Drilling Techniques, 2013, 41(6): 51-55. DOI: 10.3969/j.issn.1001-0890.2013.06.010
Citation: Zhang Su, Guan Zhichuan, Wang Jianyun, Shi Yucai, Wei Jiehong. Impact of Casing on Adjacent Well Azimuth[J]. Petroleum Drilling Techniques, 2013, 41(6): 51-55. DOI: 10.3969/j.issn.1001-0890.2013.06.010
shu

Impact of Casing on Adjacent Well Azimuth

  • 1.

    School of Petroleum Engineering, China University of Petroleum(Huadong), Qingdao, Shandong, 266580, China;

  • 2.

    Drilling Engineering & Technology Company, Sinopec Shengli Oilfield Service Corporation, Dongying, Shandong, 257064, China;

  • 3.

    Bohai Drilling Company, Sinopec Shengli Oilfield Service Corporation, Dongying, Shandong, 257200, China

More Information
  • Received Date: January 27, 2013
  • Revised Date: November 06, 2013
    Graphical Abstract
    • Abstract
  • In order to study the effect of adjacent well casing on well trajectory description,the impact of casing at different tilt angles,distances and azimuths on inclinometer data was studied.In the experiments,inclinometer was used to record the casing azimuth data,azimuth distortion value was used to characterize the azimuth deviation state and trend,and the data distortion pattern was determined.Experimental results showed that:the serious azimuth distortion caused by vertical casing was within 0.9 m,when the relative azimuth angle was 0°-180°,azimuth distortionwas positive,when the relative angle was 180°-360°,the distortion was negative;the scope of azimuth distortion caused by deviated well was similar to horizontal well,serious distortion region was within 1.5 m,when the azimuth was within the range of 0°-120° and 300°-360°,azimuth distortion was positive, when the azimuth angle was 120°-300°,the distortionwas negative.The study showed that:azimuth distortion value might reflect magnetic interference caused by adjacent well,and the study provided technical support for well trajectory description and correcting in the presence of adjacent well.
    • FullText(HTML)
    • References (18)
  • [1]
    韩志勇.定向钻井设计与计算[M].东营:中国石油大学出版社, 2007:5-47. Han Zhiyong.Design and calculation of directional drilling[M].Dongying:China University of Petroleum Press, 2007: 5-47.
    [2]
    陈庭根, 管志川.钻井工程理论与技术[M].东营:石油大学出版社, 2000:166-178. Chen Tinggen, Guan Zhichuan.Theory and technology of drilling engineering[M].Dongying:Petroleum University Press, 2000:166-178.
    [3]
    郭爱煌, 傅君眉.基于地球重力场和磁场测量的测斜技术[J].仪器仪表学报, 2001, 22(4):400-403. Guo Aihuang, Fu Junmei.The technology of inclination measurement based on the gravitational field and geomagnetic field[J].Chinese Journal of Scientific Instrument, 2001, 22(4): 400-403.
    [4]
    刘刚, 孙金, 何宝生, 等.定向井防碰地面监测系统设计及现场试验[J].石油钻探技术, 2012, 40(1):7-8. Liu Gang, Sun Jin, He Baosheng, et al.Design and field test of surface monitoring system for directional wells anti-collision[J].Petroleum Drilling Techniques, 2012, 40(1):7-8.
    [5]
    李番军.连续测斜仪研究[D].哈尔滨:哈尔滨工业大学, 2006:7-15. Li Fanjun.The research of inclinometer[D].Harbin:Harbin Institute of Technology, 2006:7-15.
    [6]
    谢子殿, 朱秀.基于磁通门与重力加速度传感器的钻井测斜仪[J].传感器技术, 2004, 23(7):30-33. Xie Zidian, Zhu Xiu.Inclinometer for artesian well based on fluxgate and gravity acceleration sensor[J].Journal of Transducer Technology, 2004, 23(7):30-33.
    [7]
    谢川.一种基于磁强计和倾角传感器的钻井测斜仪[J].仪器仪表学报, 2010, 31(10):2357-2362. Xie Chuan.Clinometer for artesian well based on magnetometer and inclination angle sensor[J].Chinese Journal of Scientific Instrument, 2010, 31(10):2357-2362.
    [8]
    吕妍红, 万民, 崔中兴.石油钻井倾斜及方位测量的研究[J].仪器仪表学报, 2002, 23(2):186-188. Lv Yanhong, Wan Min, Cui Zhongxing.The research of oil drilling angle test[J].Chinese Journal of Scientific Instrument, 2002, 23(2):186-188.
    [9]
    刘修善, 王继平.基于大地测量理论的井眼轨迹监测方法[J].石油钻探技术, 2007, 35(4):1-5. Liu Xiushan, Wang Jiping.A method for monitoring wellbore trajectory based on the theory of geodesy[J].Petroleum Drilling Techniques, 2007, 35(4):1-5.
    [10]
    鲁港, 常汉章, 邢玉德, 等.邻井间最近距离扫描的快速算法[J].石油钻探技术, 2007, 35(3):23-26. Lu Gang, Chang Hanzhang, Xing Yude, et al.Fast algorithm for scanning the nearest distance among adjacent wells[J].Petroleum Drilling Techniques, 2007, 35(3):23-26.
    [11]
    许晖, 曹永辉, 石秀华.基于磁通门技术的方位传感器设计[J].仪表技术与传感器, 2003(1):14-16. Xu Hui, Cao Yonghui, Shi Xiuhua.Design of orientation sensor based on fluxgate technique[J].Instrument Technique and Sensor, 2003 (1):14-16.
    [12]
    付鑫生, 刘塞立, 周静.磁通门测量原理与方法[J].测井技术, 1995, 19(2):109-116. Fu Xinsheng, Liu Saili, Zhou Jing.Measuring principle and method of flux gate magnetometer.[J].Well Logging Technology, 1995, 19(2):109-116.
    [13]
    吴玮.磁性测斜仪测量原理与数学模型[J].惯导与仪表, 1996(3):52-55. Wu Wei.Magnetic inclinometer measurement principle and mathematical model[J].Inertial Navigation and Instrumentation, 1996(3):52-55.
    [14]
    刁斌斌, 高德利.邻井定向分离系数计算方法[J].石油钻探技术, 2012, 40(1):22-27. Diao Binbin, Gao Deli.Calculation method of adjacent well oriented separation factors[J].Petroleum Drilling Techniques, 2012, 40(1):22-27.
    [15]
    高德利, 刘希圣, 许秉业.井眼轨迹控制[M].东营:石油大学出版社, 1994:207-299. Gao Deli, Liu Xisheng, Xu Bingye.Well trajectory control[M].Dongying:Petroleum University Press, 2000:207-299.
    [16]
    刘修善.井眼轨道几何学[M].北京:石油工业出版社, 2006:56-77. Liu Xiushan.Geometry of wellbore trajectory[M].Beijing:Petroleum Industry Press, 2006:56-77.
    [17]
    邝学农.连续测斜方法的研究和仪器设计[D].西安:西安石油大学, 2007:5-15. Kuang Xuenong.A study on the principle and devising of continuously-measuring inclinometer[D].Xi’an:Xi’an Shiyou University, 2007:5-15.
    [18]
    刘修善.实钻井眼轨迹的客观描述与计算[J].石油学报, 2007, 28(5):128-132. Liu Xiushan.Objective description and calculation of drilled wellbore trajectories[J].Acta Petrolei Sinica, 2007, 28(5):128-132.
    • Related Articles

  • Related Articles

    [1]BAO Hongzhi, SUN Yuanwei, ZOU Deyi, NIU Chengcheng. Research of the Influencing Factors on Thermal Insulation Effect of Casing with Parasitic Pipes and Central Tubing[J]. Petroleum Drilling Techniques, 2021, 49(3): 42-47. DOI: 10.11911/syztjs.2021048
    [2]ZHANG Yaming, GAO Zhentao, LI Jun, YANG Jing, ZHANG Yi, ZHANG Yanru. The Deep and Slim Casing Milling Technology of Well SU7 in Suqiao Gas Storage[J]. Petroleum Drilling Techniques, 2017, 45(3): 38-41. DOI: 10.11911/syztjs.201703007
    [3]LI Shan. Casing Optimization for CO2 Corrosion Resistance in the Xushen Gas Field[J]. Petroleum Drilling Techniques, 2016, 44(6): 55-59. DOI: 10.11911/syztjs.201606009
    [4]Tong Shaokai, Cui Huihe, Qi Jiade, Li Shanwei, Dou Yihua. The Effect of Hydraulic Anchor Structure on Casing Deformation and Extrusion Stress[J]. Petroleum Drilling Techniques, 2015, 43(6): 59-65. DOI: 10.11911/syztjs.201506011
    [5]Liang Erguo, Li Zifeng, Wang Jinmin, Zhou Lijun. Experimental Study on Casing Wear Mechanism in Oil and Gas Wells[J]. Petroleum Drilling Techniques, 2015, 43(1): 69-74. DOI: 10.11911/syztjs.201501012
    [6]Zhang Mingchang, Zhang Xinliang, Gao Jianwei. Developing and Testing XPJQ Series Floating Friction Reducers for Running Casing[J]. Petroleum Drilling Techniques, 2014, 42(5): 114-118. DOI: 10.11911/syztjs.201405021
    [7]Jiao Shaoqing, Zhou Huisheng, Tu Maochuan, Li Zaoyuan, Guo Xiaoyang. Application of Double-Effect Antiwearing Technology in Deep Well X202,Western Sichuan[J]. Petroleum Drilling Techniques, 2013, 41(6): 78-81. DOI: 10.3969/j.issn.1001-0890.2013.06.015
    [8]Long Gang, Li Meng, Guan Zhichuan, Liao Hualin. Evaluation Method of Casing Safety and Reliability in Deep Wells[J]. Petroleum Drilling Techniques, 2013, 41(4): 48-53. DOI: 10.3969/j.issn.1001-0890.2013.04.011
    [9]He Baosheng, Liu Hualiang, Liu Gang, Yang Quanzhi, Geng Zhanli. Anti-Collision Prediction Model for Drill Bit Approaching Adjacent Well Based on Spherical Wave Propagation Theory[J]. Petroleum Drilling Techniques, 2013, 41(3): 62-66. DOI: 10.3969/j.issn.1001-0890.2013.03.012
    [10]Liang Erguo, Li Zifeng, Wang Changjin, Han Dongying. Casing Abrasion Prediction for Deep and Extended Reach Wells[J]. Petroleum Drilling Techniques, 2013, 41(2): 65-69. DOI: 10.3969/j.issn.1001-0890.2013.02.013

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (2464) PDF downloads (3976) Cited by()
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return