Volume 41 Issue 2
Mar.  2013
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Liang Erguo, Li Zifeng, Wang Changjin, Han Dongying. Casing Abrasion Prediction for Deep and Extended Reach Wells[J]. Petroleum Drilling Techniques, 2013, 41(2): 65-69. DOI: 10.3969/j.issn.1001-0890.2013.02.013
Citation: Liang Erguo, Li Zifeng, Wang Changjin, Han Dongying. Casing Abrasion Prediction for Deep and Extended Reach Wells[J]. Petroleum Drilling Techniques, 2013, 41(2): 65-69. DOI: 10.3969/j.issn.1001-0890.2013.02.013
shu

Casing Abrasion Prediction for Deep and Extended Reach Wells

  • College of Vehicles and Energy, Yanshan University, Qinhuangdao, Hebei, 066004, China

More Information
  • Received Date: May 25, 2012
  • Revised Date: December 09, 2012
    Graphical Abstract
    • Abstract
  • In order to improve the design of casing strength and prevent severe casing wear out,casing abrasion prediction technology was analyzed.The tension-torque equation of drill string in deep wells and extended reach wells was deduced through identifying the drill string mechanics for directional wells,and considering stiffness and buckling of drill string.The prediction model of casing abrasion was established according to the energy principle and prediction software was developed.The software can predict casing abrasion at different depths in hole,for different casing program,BHA,well track,drilling fluid types and drilling parameters,during drilling and tripping.Its application shows that the software can give a more accurate and reliable prediction,with less artificial error.It provides new technical support to ensure safe and efficient drilling of deep wells and extended reach wells.
    • FullText(HTML)
    • References (13)
  • [1]
    梁尔国,李子丰,赵金海.磨损套管抗挤强度计算模型[J].石油钻探技术,2012,40(2):41-45. Liang Erguo,Li Zifeng,Zhao Jinhai.Model for collapsing strength calculation of worn casing[J].Petroleum Drilling Techniques,2012,40(2):41-45.
    [2]
    White J P,Dawson R.Casing wear:laboratory measurements and field predictions[J].SPE Drilling Engineering,1987,2(1):56-62.
    [3]
    Bradley W B,Fontenot J E.The prediction and control of casing wear[J].Journal of Petroleum Technology,1975,27(2):233-245.
    [4]
    Hall R W,Jr,Garkasi A,Greg D,et al.Recent advances in casing wear technology[R].SPE/IADC 27532,1994.
    [5]
    刘书杰,谢仁军,刘小龙.大位移井套管磨损预测模型研究及其应用[J].石油钻采工艺,2010,32(6):11-15. Liu Shujie,Xie Renjun,Liu Xiaolong.Research and application of casing wear prediction for extended reach well[J].Oil Drilling Production Technology,2010,32(6):11-15.
    [6]
    曾德智,龚龙祥,付建红,等.全井段套管磨损量预测与磨损后抗挤强度计算方法研究[J].钢管,2010,39(增刊1):11-16. Zeng Dezhi,Gong Longxiang,Fu Jianhong,et al.Study on prediction of abrasion amount of and calculation method for post-abrasion collapse strength of full-length well casings[J].Steel Pipe,2010,39(supplement 1):11-16.
    [7]
    廖华林,管志川,马广军,等.深井超深井内壁磨损套管剩余强度计算[J].工程力学,2010,27(2):250-256. Liao Hualin,Guan Zhichuan,Ma Guangjun,et al.Remaining strength calculation of internal wall worn casing in deep and ultra-deep wells[J].Engineering Mechanics,2010,27(2):250-256.
    [8]
    Johancsik C A,Friesen D B,Dawson R.Torque and drag in directional wells?prediction and measurement[R].SPE 11380,1983.
    [9]
    李子丰,李敬元,孔凡君.钻柱拉力-扭矩模型述评[J].石油机械,1993,21(8):43-46. Li Zifeng,Li Jingyuan,Kong Fanjun.Comment on tension-torque model of drillstrings[J].China Petroleum Machinery,1993,21(8):43-46.
    [10]
    李子丰,梁尔国.钻柱力学研究现状及进展[J].石油钻采工艺,2008,30(2):1-9. Li Zifeng,Liang Erguo.Research and development of drill string mechanics[J].Oil Drilling Production Technology,2008,30(2):1-9.
    [11]
    Li Zifeng,Liu Xisheng,Zhou Daqian,et al.A steady tension-torque model for drillstring in horizontal wells[R].SPE 26295,1993.
    [12]
    李子丰,马兴瑞,黄文虎.油气井杆管柱的静力稳定性[J].工程力学,1997,14(1):17-25. Li Zifeng,Ma Xingrui,Huang Wenhu.Static stability of pipe string in oil and gas wells[J].Engineering Mechanics,1997,14(1):17-25.
    [13]
    梁尔国.深井和大位移井套管磨损规律试验及磨损程度预测[D].秦皇岛:燕山大学机械工程学院,2012. Liang Erguo.The wear rule experiment and wear degree prediction of casing in deep wells and extended reach wells[D].Qinhuangdao:Yanshan University,School of Mechanical Engineering,2012.
    • Related Articles

  • Related Articles

    [1]LIU Jinlu, LI Jun, LIU Gonghui, LI Hui, YANG Hongwei. Prediction Model of Wellbore Temperature Field during Deepwater Cementing Circulation Stage[J]. Petroleum Drilling Techniques, 2024, 52(4): 66-74. DOI: 10.11911/syztjs.2024065
    [2]LI Shuzhan, YANG Jin, ZHU Guojing, LI Zhong, WANG Ning. Prediction of the Minimum Depth of Setting for Conductor Anchor Node in Deep-Water Drilling[J]. Petroleum Drilling Techniques, 2023, 51(2): 29-36. DOI: 10.11911/syztjs.2022039
    [3]WANG Fuhua, LI Xueyu, ZHAO Haiyan, WANG Luyi. Determination of the Apparent Viscosity of Oil-Based Drilling Fluid by Using Marsh Funnel Viscosity[J]. Petroleum Drilling Techniques, 2016, 44(5): 60-64. DOI: 10.11911/syztjs.201605010
    [4]DENG Yong, CHEN Mian, JIN Yan, LU Yunhu, ZOU Daiwu. Prediction Model and Numerical Simulation for Rock Fissure Length under Impact Load[J]. Petroleum Drilling Techniques, 2016, 44(4): 41-46. DOI: 10.11911/syztjs.201604008
    [5]WENG Dingwei, FU Haifeng, LU Yongjun, ZHENG Lihui, MA Jianjun. A Model for Predicting the Volume of Stimulated Reservoirs[J]. Petroleum Drilling Techniques, 2016, 44(1): 95-100. DOI: 10.11911/syztjs.201601018
    [6]Zeng Chunmin, Wei Longgui, Zhang Chao, Zhang Chong, Liu Xianyu, Huang Liang. Casing Wear Prediction for HTHP Gas Wells in West of South China Sea Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(6): 46-53. DOI: 10.11911/syztjs.201506009
    [7]Geng Zhi, Fan Honghai, Chen Mian, Wang Jinzhong, Ji Rongyi, Jing Ning. Application and Research on Methods for 3D Space Rock Drillability Prediction[J]. Petroleum Drilling Techniques, 2014, 42(5): 80-84. DOI: 10.11911/syztjs.201405014
    [8]Zou Deyong, Zhao Jian, Guo Yulong, Fang Manzong, Guan Shen. A Model for Predicting Leak-off Pressure in Permeable-Sandstone Formations[J]. Petroleum Drilling Techniques, 2014, 42(1): 33-36. DOI: 10.3969/j.issn.1001-0890.2014.01.006
    [9]He Baosheng, Liu Hualiang, Liu Gang, Yang Quanzhi, Geng Zhanli. Anti-Collision Prediction Model for Drill Bit Approaching Adjacent Well Based on Spherical Wave Propagation Theory[J]. Petroleum Drilling Techniques, 2013, 41(3): 62-66. DOI: 10.3969/j.issn.1001-0890.2013.03.012
    [10]Liang Erguo, Li Zifeng, Zhao Jinhai. Model for Collapsing Strength Calculation of Worn Casing[J]. Petroleum Drilling Techniques, 2012, 40(2): 41-45. DOI: 10.3969/j.issn.1001-0890.2012.02.008

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (3058) PDF downloads (3897) Cited by()
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return