Liang Erguo, Li Zifeng, Zhao Jinhai. Model for Collapsing Strength Calculation of Worn Casing[J]. Petroleum Drilling Techniques, 2012, 40(2): 41-45. DOI: 10.3969/j.issn.1001-0890.2012.02.008
Citation: Liang Erguo, Li Zifeng, Zhao Jinhai. Model for Collapsing Strength Calculation of Worn Casing[J]. Petroleum Drilling Techniques, 2012, 40(2): 41-45. DOI: 10.3969/j.issn.1001-0890.2012.02.008

Model for Collapsing Strength Calculation of Worn Casing

More Information
  • Received Date: September 27, 2011
  • Revised Date: January 31, 2012
  • Since bearing capacity of a casing will reduce when the casing is worn,it is very important to predict or evaluate the collapse capacity of the worn casing.To combination numerical simulation and actual tests,the collapsing failure mechanism of worn casing and the factors and rules impacting the collapse strength were studied.Collapse of crescent worn casing belongs to "three hinged" instability.The severely-worn position on the casing was yielded into plastic zone first and deformed greatly,which resulted in the plastic instability of the whole structure.The collapsing strength of the worn casing presented changes of exponent,power function,and linear trend with the residual casing wall thickness,wear radius and axial load respectively.Based on this study,the calculation model of collapsing strength for the whole worn casing were established and the model was verified by tests,which showed the relative error between calculated from the model and those tested was within 5%.
  • [1]
    Yukihisa K,Yasushi T,Toshitaro M.Effect of wear and bending on casing collapse strength.SPE 24597,1992.
    [2]
    Song J S,Bowen J,Klementich F.The internal oressure capacity of crescent-shaped wear casing.SPE/IADC 23902,1992.
    [3]
    王小增,杨久红,窦益华.套管磨损后剩余壁厚及剩余强度分析[J].石油钻探技术,2008,36(2):14-17. Wang Xiaozeng,Yang Jiuhong,Dou Yihua.Analysis of casing remaining thickness and residual strength after wearing[J].Petroleum Drilling Techniques,2008,36(2):14-17.
    [4]
    窦益华,张福祥,王维君,等.井下套管磨损深度及剩余强度分析[J].石油钻采工艺,2007,29(4):36-39. Dou Yihua,Zhang Fuxiang,Wang Weijun,et al.Analysis on wear depth and residual strength of downhole casing[J].Oil Drilling Production Technology,2007,29(4):36-39.
    [5]
    关舒伟,李春福,李学艺,等.非均匀外挤压力作用下内径偏磨套管的应力分析[J].石油钻探技术,2009,37(2):38-40. Guan Shuwei,Li Chunfu,Li Xueyi,et al.Stress analysis of worn casing under heterogeneous external pressure[J].Petroleum Drilling Techniques,2009,37(2):38-40.
    [6]
    曾德智,林元华,施太和,等.磨损套管抗挤强度的新算法研究[J].天然气工业,2005,25(2):78-80,106. Zeng Dezhi,Lin Yuanhua,Shi Taihe,et al.New algorithm of collapsing strength of wearing casing[J].Natural Gas Industry,2005,25(2):78-80,106.
    [7]
    曾德智,龚龙祥,付建红,等.全井段套管磨损量预测与磨损后抗挤强度计算方法研究[J].钢管,2010,39(增刊1):11-16. Zeng Dezhi,Gong Longxiang,Fu Jianhong,et al.Study on prediction of abrasion amount of and calculation method for post-abrasion collapse strength of full-length well casings[J].Steel Pipe,2010,39(supplement 1):11-16.
    [8]
    廖华林,管志川,马广军,等.深井超深井内壁磨损套管剩余强度计算[J].工程力学,2010,27 (2):250-256. Liao Hualin,Guan Zhichuan,Ma Guangjun,et al.Remaining strength calculation of internal wall worn casing in deep and ultra-deep wells[J].Engineering Mechanics,2010,27 (2):250-256.
    [9]
    李廉锟.结构力学[M].3版.北京:高等教育出版社,1996:56-63. Li Liankun.Structural mechanics[M].3rd ed.Beijing:Higher Education Press,1996:56-63.
    [10]
    王长进.钻杆与套管摩擦磨损研究.秦皇岛:燕山大学车辆与能源学院,2007. Wang Changjin.Friction and wear research of the drill pipe and casing.Qinhuangdao:Yanshan University,College of Vehicles and Energy,2007.
    [11]
    宋根才.复杂井况水平井套管损坏机理及预防技术研究.东营:中国石油大学(华东)机电工程学院,2010. Song Gencai.Study on casing damage mechanism and prevention.Dongying:China University of Petroleum(Huadong),College of Mechanical and Electronic Engineering,2010.
    [12]
    Tamano T,Mimaki T,Yanagimoto S.A new empirical formula for collapse resistance of commercial casing[J].Journal of Energy Resources Technology,1983,43(5):489-495.
  • Cited by

    Periodical cited type(6)

    1. 胜亚楠,李伟廷,管志川,蒋金宝,兰凯,孔华,郭文军. 基于测井资料的含不确定度地层压力区域三维模型构建. 断块油气田. 2021(01): 89-93 .
    2. 胜亚楠,管志川,李伟廷,蒋金宝,晁文学,孔华. 基于贝叶斯理论的含可信度孔隙压力随钻修正方法. 石油钻采工艺. 2020(03): 265-270 .
    3. 张宁波. 固井工程数据实时采集与远程传输技术探讨. 电子技术与软件工程. 2015(03): 206 .
    4. 龚铭,夏宏泉,陈颖杰. 川东黑楼门构造地层三压力剖面的建立及应用. 国外测井技术. 2015(01): 34-37+57+3-4 .
    5. 朱庚雪,刘得军,张颖颖,王政,赖天祥. 基于hp-FEM的随钻电磁波测井仪器响应正演分析. 石油钻探技术. 2015(02): 63-70 . 本站查看
    6. 蔡军,李文拓,刘鹏,陈鸣,郑金龙,程远方. 琼东南盆地深水区探井随钻压力监测技术与应用. 天然气工业. 2015(10): 99-105 .

    Other cited types(11)

Catalog

    Article Metrics

    Article views (3001) PDF downloads (3365) Cited by(17)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return