Citation: | LI Fuqiang, SONG Zhaohui, YI Ming, et al. Calculation of optimal distance between electrode and probe in relief well magnetic ranging [J]. Petroleum Drilling Techniques, 2024, 52(3):34-39. DOI: 10.11911/syztjs.2024008 |
Ranging accuracy is a key factor affecting the successful connection between relief wells and accident wells. In order to improve the measurement accuracy of the active magnetic ranging system based on injected current, the electric field distribution in each medium was analyzed, and the current density distribution model of the accident well casing was established. By analyzing the current density distribution law of accident well casing, the calculation model of the optimal distance between the electrode and the probe based on the principle of the maximum magnetic induction intensity at the measuring point was established and the effectiveness of the model was verified by comparison test results. Calculations with examples show that the optimal distance between the electrode and the probe is related to not only the distance between the electrode and the accident well but also the relative well inclination angle. In addition, it has nothing to do with the injected current intensity. The distance between the peak point of the casing current density of the accident well and the coordinate point of the accident well is approximately equal to that between the electrode and the probe in the accident well. The optimal distance between the electrode and the probe is approximately equal to the product of the distance between the electrode and the accident well and the cosecant of the relative inclination angle. According to the calculation results of the optimal distance, a reasonable design of the distance between the electrode and the probe can contribute to the improvement measurement accuracy of the active magnetic ranging system based on injected current.
[1] |
FLORES V, DAILEY P, TODD D, et al. Relief well planning[R]. SPE 168029, 2014.
|
[2] |
车阳,乔磊,王建国,等. X 井精准治理技术研究与应用[J]. 断块油气田,2023,30(2):347–352.
CHE Yang, QIAO Lei, WANG Jianguo, et al. Research and application of precise treatment technology for well X[J]. Fault-Block Oil & Gas Field, 2023, 30(2): 347–352.
|
[3] |
刁斌斌,高德利,唐海雄,等. 救援井与事故井邻井距离探测技术[C]//第十六届全国探矿工程(岩土钻掘工程)技术学术交流年会论文集. 北京:地质出版社,2011:201-205.
DIAO Binbin, GAO Deli, TANG Haixiong, et al. The distance detection technology between rescue wells and accident wells [C]//Proceedings of the 16th National Academic Exchange Conference on Exploration Engineering (Rock and Soil Drilling Engineering) Technology. Beijing: Geological Publishing House, 2011: 201-205.
|
[4] |
WOLFF C J M, DE WARDT J P. Borehole position uncertainty-analysis of measuring methods and derivation of systematic error model[J]. Journal of Petroleum Technology, 1981, 33(12): 2338–2350. doi: 10.2118/9223-PA
|
[5] |
WILLIAMSON H S. Accuracy prediction for directional measurement while drilling[J]. SPE Drilling & Completion, 2000, 15(4): 221–233.
|
[6] |
TORKILDSEN T, HÅVARDSTEIN S T, WESTON J, et al. Prediction of wellbore position accuracy when surveyed with gyroscopic tools[J]. SPE Drilling & Completion, 2008, 23(1): 5–12.
|
[7] |
DIAO Binbin, GAO Deli. Study on a ranging system based on dual solenoid assemblies, for determining the relative position of two adjacent wells[J]. Computer Modeling in Engineering & Sciences, 2013, 90(1): 77–90.
|
[8] |
KUCKES A F, HAY R T, MCMAHON J, et al. New electromagnetic surveying/ranging method for drilling parallel horizontal twin wells[J]. SPE Drilling & Completion, 1996, 11(2): 85–90.
|
[9] |
高德利,刁斌斌. 复杂结构井磁导向钻井技术进展[J]. 石油钻探技术,2016,44(5):1–9.
GAO Deli, DIAO Binbin. Development of the magnetic guidance drilling technique in complex well engineering[J]. Petroleum Drilling Techniques, 2016, 44(5): 1–9.
|
[10] |
李翠,高德利,刘庆龙,等. 邻井随钻电磁测距防碰计算方法研究[J]. 石油钻探技术,2016,44(5):52–59.
LI Cui, GAO Deli, LIU Qinglong, et al. A method of calculating of avoiding collisions with adjacent wells using electromagnetic ranging surveying while drilling tools[J]. Petroleum Drilling Technique, 2016, 44(5): 52–59.
|
[11] |
WEST C L, KUCKES A F, RITCH H J. Successful ELREC logging for casing proximity in an offshore Louisiana blowout[R]. SPE 11996, 1983.
|
[12] |
KUCKES A F, LAUTZENHISER T, NEKUT A G, et al. An electromagnetic survey method for directionally drilling a relief well into a blown out oil or gas well[J]. SPE Journal, 1984, 24(3): 269–274.
|
[13] |
李翠,高丽萍,李佳,等. 邻井随钻电磁测距防碰工具模拟试验研究[J]. 石油钻探技术,2017,45(6):110–115.
LI Cui, GAO Liping, LI Jia, et al. Experiment research on an electromagnetic anti-collision detection tool while drilling adjacent wells[J]. Petroleum Drilling Techniques, 2017, 45(6): 110–115.
|
[14] |
DIAO Binbin, GAO Deli, LI Genkui. Development of static magnetic detection anti-collision system while drilling[C]//Proceedings of the 2016 International Conference on Artificial Intelligence and Engineering Applications. Amsterdam: Atlantis Press, 2016: 543-551.
|
[15] |
WU Zhiyong, GAO Deli, DIAO Binbin. An investigation of electromagnetic anti-collision real-time measurement for drilling cluster wells[J]. Journal of Natural Gas Science and Engineering, 2015, 23: 346–355. doi: 10.1016/j.jngse.2015.02.016
|
[16] |
刁斌斌,高德利. 邻井定向分离系数计算方法[J]. 石油钻探技术,2012,40(1):22–27. doi: 10.3969/j.issn.1001-0890.2012.01.005
DIAO Binbin, GAO Deli. Calculation method of adjacent well oriented separation factors[J]. Petroleum Drilling Techniques, 2012, 40(1): 22–27. doi: 10.3969/j.issn.1001-0890.2012.01.005
|
[17] |
DOU Xinyu, LIANG Huaqing, LIU Yang. Anticollision method of active magnetic guidance ranging for cluster wells[J]. Mathematical Problems in Engineering, 2018, 2018: 7583425.
|
[18] |
INGRAM S R, LAHMAN M, PERSAC S. Methods improve stimulation efficiency of perforation clusters in completions[J]. Journal of Petroleum Technology, 2014, 66(4): 32–36. doi: 10.2118/0414-0032-JPT
|
[19] |
李翠,高德利. 救援井与事故井连通探测方法初步研究[J]. 石油钻探技术,2013,41(3):56–61.
LI Cui, GAO Deli. Preliminary research on detection method for connecting relief well to blowout well[J]. Petroleum Drilling Techniques, 2013, 41(3): 56–61.
|
[20] |
LI Cui, GAO Deli, WU Zhiyong, et al. A method for the detection of the distance & orientation of the relief well to a blowout well in offshore drilling[J]. Computer Modeling in Engineering and Sciences, 2012, 89(1): 39–56.
|
[21] |
ZHANG Sen, DIAO Binbin, GAO Deli. A new method of anti-collision while drilling based on radial gradient measurement[R]. ARMA-2019-0114, 2019.
|
[22] |
ZHANG Sen, DIAO Binbin, GAO Deli. Numerical simulation and sensitivity analysis of accurate ranging of adjacent wells while drilling[J]. Journal of Petroleum Science and Engineering, 2020, 195: 107536. doi: 10.1016/j.petrol.2020.107536
|
[1] | SUN Huan, ZHU Mingming, YANG Yongping, WANG Weiliang, WANG Kai, ZHAO Xiangyang. Comprehensive Leakage Control Technology for Shale Gas Wells in Western Margin Thrust Zone of Ordos Basin[J]. Petroleum Drilling Techniques, 2025, 53(1): 49-54. DOI: 10.11911/syztjs.2024117 |
[2] | SHI Peiming, NI Huafeng, HE Huifeng, SHI Chongdong, LI Luke, ZHANG Yanbing. Key Technologies for Safe Drilling in Horizontal Section of Deep Coal Rock Gas Horizontal Well in Ordos Basin[J]. Petroleum Drilling Techniques, 2025, 53(1): 17-23. DOI: 10.11911/syztjs.2024112 |
[3] | ZHAO Zhenfeng, WANG Wenxiong, XU Xiaochen, YE Liang, LI Ming. Hydraulic Fracturing Technology for Deep Marine Shale Gas in Ordos Basin[J]. Petroleum Drilling Techniques, 2023, 51(5): 23-32. DOI: 10.11911/syztjs.2023081 |
[4] | ZHANG Kuangsheng, QI Yin, XUE Xiaojia, TAO Liang, CHEN Wenbin, WU An’an. CO2 Regional Enhanced Volumetric Fracturing Technology for Shale Oil Horizontal Wells in Ordos Basin[J]. Petroleum Drilling Techniques, 2023, 51(5): 15-22. DOI: 10.11911/syztjs.2023091 |
[5] | ZHANG Jinping, NI Huafeng, SHI Peiming. Safe and Efficient Drilling in Presalt High-Sulfur Reservoirs in the Eastern Gas Fields of Ordos Basin[J]. Petroleum Drilling Techniques, 2023, 51(3): 22-29. DOI: 10.11911/syztjs.2023073 |
[6] | JIA Jia, XIA Zhongyue, FENG Lei, LI Jian, WANG Yang. Key Technology of Optimized and Fast Slim Hole Drilling in Shenfu Block, Ordos Basin[J]. Petroleum Drilling Techniques, 2022, 50(2): 64-70. DOI: 10.11911/syztjs.2021110 |
[7] | ZHAO Zhenfeng, LI Kai, ZHAO Pengyun, TAO Liang. Practice and Development Suggestions for Volumetric Fracturing Technology for Shale Oil in the Ordos Basin[J]. Petroleum Drilling Techniques, 2021, 49(4): 85-91. DOI: 10.11911/syztjs.2021075 |
[8] | HE Zuqing, LIANG Chengchun, PENG Hanxiu, ZHU Ming, HE Tong. Research and Tests on Horizontal Well Smart Layering Exploiting Technology in Tight Oil Reservoirs in Southern Ordos Basin[J]. Petroleum Drilling Techniques, 2017, 45(3): 88-94. DOI: 10.11911/syztjs.201703016 |
[9] | WANG Guangtao, XU Chuangchao, CAO Zongxiong, GUO Xiaoyong. A Sand Control Downhole Fracturing Technique for Tight Reservoir Development in the Ordos Basin[J]. Petroleum Drilling Techniques, 2016, 44(5): 84-89. DOI: 10.11911/syztjs.201605014 |
[10] | Guo Wenmeng, Dang Donghong, Zhu Zexin, Xu Minghui, Chen Guang, Huang Xia. Cementing Techniques of Mono-Bore Well Completion in Yishan Slope of Ordos Basin[J]. Petroleum Drilling Techniques, 2014, 42(4): 75-78. DOI: 10.3969/j.issn.1001-0890.2014.04.014 |
1. |
史配铭,刘召友,荣芳,武宏超,米博超,念富龙. 超深探井荔参1井钻井关键技术. 石油工业技术监督. 2024(02): 50-55 .
![]() | |
2. |
佘朝毅. 四川盆地深层页岩气钻井关键技术新进展及发展展望. 天然气工业. 2024(03): 1-9 .
![]() | |
3. |
纪慧,李军,杨宏伟,柳贡慧,关立臣. 底部钻具组合力学性能分析及优化. 石油机械. 2024(06): 20-28 .
![]() | |
4. |
何新星,严焱诚,朱礼平,王希勇,朱化蜀,王治国. 四川盆地威荣深层页岩气安全与提速钻井技术. 石油实验地质. 2024(03): 630-637 .
![]() | |
5. |
宋先知,姚学喆,许争鸣,周蒙蒙,王庆辰. 超深井控温钻井隔热涂层参数影响机制研究. 石油钻探技术. 2024(02): 126-135 .
![]() | |
6. |
张敏,程丙方,严佳佳,曹立明,王鑫,刘胜华,丁群洋. 复兴地区页岩油优快钻井技术. 石油地质与工程. 2024(04): 120-126 .
![]() | |
7. |
王治国,严焱诚,黄河淳,罗成波. 井研-犍为地区难钻地层钻头优选及应用. 科技和产业. 2024(16): 194-198 .
![]() | |
8. |
刘志尧,管彬,刘佳林,卢秀德,方福君,李剑秋. 深层页岩气连续油管钻磨桥塞技术. 油气井测试. 2024(04): 17-22 .
![]() | |
9. |
Yaoran Wei,Yongcun Feng,Zhenlai Tan,Tianyu Yang,Shuang Yan,Xiaorong Li,Jingen Deng. Simultaneously improving ROP and maintaining wellbore stability in shale gas well:A case study of Luzhou shale gas reservoirs. Rock Mechanics Bulletin. 2024(03): 91-103 .
![]() |
|
10. |
唐霞. 营探1井超深井安全钻井关键技术. 石油工业技术监督. 2024(11): 55-59+65 .
![]() | |
11. |
李涛,杨哲,徐卫强,阳强,杨兆亮. 泸州区块深层页岩气水平井优快钻井技术. 石油钻探技术. 2023(01): 16-21 .
![]() | |
12. |
何冠羲,姜洪斌,梁悦,杨扬,韩龙. 表面活性剂提高页岩气井固井水泥浆的抗污染性能评价. 油田化学. 2023(01): 32-38 .
![]() | |
13. |
李兴财. 川渝深层页岩气水平井钻完井提速提效技术集成研究与应用. 内蒙古石油化工. 2023(01): 86-89 .
![]() | |
14. |
刘修刚,姜在炳,王毅,李浩哲,庞涛. 赵固一矿区域地面水平注浆钻井关键技术. 煤炭技术. 2023(06): 38-40 .
![]() | |
15. |
赵文彬,宋文豪. 永川黄202区块页岩气水平井钻井提速对策分析. 天然气勘探与开发. 2023(02): 127-134 .
![]() | |
16. |
赵靖影,邓小卫,杨天宇,廖伟,谭桢来,魏耀冉. 泸州深层页岩气钻井井壁失稳机理及主控因素分析. 石化技术. 2023(11): 116-119+160 .
![]() | |
17. |
张震,万秀梅,吴鹏程,李郑涛,文莉. 川南龙马溪组深层页岩井壁失稳原因分析及对策. 特种油气藏. 2022(01): 160-168 .
![]() | |
18. |
王文刚,胡大梁,欧彪,房舟,刘磊. 井研–犍为地区缝洞型复杂地层钻井关键技术. 石油钻探技术. 2022(02): 58-63 .
![]() | |
19. |
贾佳,夏忠跃,冯雷,李建,王烊. 鄂尔多斯盆地神府区块小井眼优快钻井关键技术. 石油钻探技术. 2022(02): 64-70 .
![]() | |
20. |
贾利春,李枝林,张继川,陶怀志,李雷,黄崇君,魏萧. 川南海相深层页岩气水平井钻井关键技术与实践. 石油钻采工艺. 2022(02): 145-152 .
![]() | |
21. |
李奎. 泸州深层页岩气水平段钻井提速关键技术. 钻探工程. 2022(05): 100-105 .
![]() | |
22. |
李奎. 泸州深层页岩气呼吸性地层井漏堵漏方法及对策分析——以Y101H3-4井为例. 钻探工程. 2022(05): 106-110 .
![]() | |
23. |
杜焕福,董佑桓,侯文辉,王春伟,孙鑫,杜淑艳,叶应贵. 定测录导一体化在提升水平井储层钻遇率中的应用. 中国地质调查. 2022(06): 1-9 .
![]() |