Citation: | LI Yongkang, ZHANG Zitan, ZHANG Weiwei, WANG Peng, LIU Jinwei, GUO Hui. Long-Term Expandable Zonal Water Injection Technology in the Shengli Oilfield[J]. Petroleum Drilling Techniques, 2020, 48(4): 100-105. DOI: 10.11911/syztjs.2020092 |
To solve the problem of frequent replacement of expandable zonal water injection string due to expansion packer damage or bottom ball valve leakage, a cylinder-type expansion packer with relatively independent internal and external pressure systems was developed in accordance with the principle of hydraulic transmission. According to field practices, a combined sand flushing valve and leak-proof device was developed to ensure positive sealing and to reduce the influence of bottom ball valve leakage on the performance of a zonal water injection string. An expandable zonal water injection string with balanced force was designed based on a cylinder type expansion packer. It combined with sand flushing valve and leak-proof device to form a long-term expandable zonal water injection technology. This technology was applied in more than 100 wells in the Shengli Oilfield, and proved to be continuously effective. The field application results show that this technology can effectively solve the problem of integral failure of expandable zonal water injection strings caused by expansion packer damage and bottom ball valve leakage, thus improving the development efficacy of water injection.
[1] |
董卫兵. 中国东部老油田开发的实践探索与启示[J]. 会计之友, 2011(2): 122–124. doi: 10.3969/j.issn.1004-5937.2011.02.051
DONG Weibing. Practical exploration and enlightenment of the development of old oil fields in eastern China[J]. Friends of Accounting, 2011(2): 122–124. doi: 10.3969/j.issn.1004-5937.2011.02.051
|
[2] |
陈祥. 浅谈水驱单元提高注水井“三率”的方法[J]. 中文科技期刊数据库(引文版)工程技术, 2015, 7(15): 261.
CHEN Xiang. Discussion on the method of improving the“triple ratio”of water injection wells in water flooding unit[J]. Chinese Science and Technology Periodical Database(Citation Version)Engineering Technology, 2015, 7(15): 261.
|
[3] |
王增林. 胜利油田分层注水工艺技术研究与实践[J]. 油气地质与采收率, 2018, 25(6): 1–6.
WANG Zenglin. Research and practice of separated layer water injection technology in Shengli Oilfield[J]. Petroleum Geology and Recovery Efficiency, 2018, 25(6): 1–6.
|
[4] |
刘连伟. 油井分层注水用KZ344-114型扩张式封隔器[J]. 石油机械, 2007, 35(3): 27–28. doi: 10.3969/j.issn.1001-4578.2007.03.009
LIU Lianwei. KZ344-114 type inflatable packer used for separate-layer water injection[J]. China Petroleum Machinery, 2007, 35(3): 27–28. doi: 10.3969/j.issn.1001-4578.2007.03.009
|
[5] |
汪润涛.分层注水管柱失效分析与评估[D].青岛: 中国石油大学(华东), 2017.
WANG Runtao. Failure analysis and evaluation of layered water injection[D]. Qingdao: China University of Petroleum(East China), 2017.
|
[6] |
陈向军,李景辉,陶晓. 影响分注有效期因素分析及下步对策[J]. 内蒙古石油化工, 2009,35(11): 44–45.
CHEN Xiangjun, LI Jinghui, TAO Xiao. Analysis of the factors affecting the validity period of separate injection wells and the next countermeasures[J]. Inner Mongolia Petrochemical Industry, 2009,35(11): 44–45.
|
[7] |
刘阳,秦金立. 无骨架内衬扩张式封隔器的研制与现场试验[J]. 石油钻探技术, 2017, 45(5): 68–72.
LIU Yang, QIN Jinli. Development and field test of non-lining inflatable packers[J]. Petroleum Drilling Techniques, 2017, 45(5): 68–72.
|
[8] |
秦金立. 选择性重复压裂工具关键技术[J]. 石油钻探技术, 2018, 46(4): 71–77.
QIN Jinli. Key techniques of selective refracturing tools[J]. Petroleum Drilling Techniques, 2018, 46(4): 71–77.
|
[9] |
徐新华,唐海兵,胡正强,等. 小直径扩张式封隔器压裂管柱的研制与应用[J]. 石油机械, 2018, 46(9): 81–86.
XU Xinhua, TANG Haibing, HU Zhengqiang, et al. Development and application of fracturing string with small diameter expandable packer[J]. China Petroleum Machinery, 2018, 46(9): 81–86.
|
[10] |
张道鹏,刘勇. 扩张式封隔器在老井试修中的应用试验[J]. 石化技术, 2019, 26(1): 132. doi: 10.3969/j.issn.1006-0235.2019.01.080
ZHANG Daopeng, LIU Yong. Application test of expansion packer in old well testing and repair[J]. Petrochemical Industry Technology, 2019, 26(1): 132. doi: 10.3969/j.issn.1006-0235.2019.01.080
|
[11] |
李国太. K344油层保护封隔器的研究与应用[J]. 石油机械, 2009, 37(6): 55–57.
LI Guotai. Research and application of K344 reservoir protection packer[J]. China Petroleum Machinery, 2009, 37(6): 55–57.
|
[12] |
王宏万,马艳洁,刘晋伟,等. 密闭扩张式封隔器的研制及应用[J]. 石油机械, 2012, 40(3): 91–93.
WANG Hongwan, MA Yanjie, LIU Jinwei, et al. The development and application of the K344(1)-112 airtight expansion packer[J]. China Petroleum Machinery, 2012, 40(3): 91–93.
|
[13] |
于九政,王子建,罗必林,等. 深井多级分注工艺管柱研制及应用[J]. 石油机械, 2012, 40(10): 88–90.
YU Jiuzheng, WANG Zijian, LUO Bilin, et al. Development and application of multistage separate injection technological string for deep well[J]. China Petroleum Machinery, 2012, 40(10): 88–90.
|
[14] |
邱宣怀.机械设计[M].北京: 高等教育出版社, 1997: 120.
QIU Xuanhuai. Mechanical design[M]. Beijing: Higher Education Press, 1997: 120.
|
1. |
王旱祥,任京文,于长录,车家琪,邓君宇,徐鸿志,刘延鑫,朱晓洋. 天然气水合物举升管气液分离过程数值模拟与方案优选. 石油钻采工艺. 2023(02): 203-210 .
![]() | |
2. |
王晓光,姜立芳,尹建国,刘荣波,朱绍东. 基于沉积法的海底天然气渗漏活动特征检测. 能源与环保. 2022(01): 196-201 .
![]() | |
3. |
王磊,杨进,李莅临,胡志强,柯珂,臧艳彬,孙挺. 深水含水合物地层钻井井口稳定性研究. 岩土工程学报. 2022(12): 2312-2318 .
![]() | |
4. |
王志刚,李小洋,张永彬,尹浩,胡晨,梁金强,黄伟. 海域非成岩天然气水合物储层改造方法分析. 钻探工程. 2021(06): 32-38 .
![]() | |
5. |
冯轩,翟亚若,王久星,韩金虎,陈映赫,马麟. 置换法联合压裂开采天然气水合物技术. 现代化工. 2021(12): 22-26 .
![]() | |
6. |
陈静. 浅谈海域天然气水合物开采方法及风险控制. 科技风. 2020(01): 109-110 .
![]() | |
7. |
李莅临,杨进,路保平,柯珂,王磊,陈柯锦. 深水水合物试采过程中地层沉降及井口稳定性研究. 石油钻探技术. 2020(05): 61-68 .
![]() | |
8. |
李庆超,程远方,邵长春. 允许适度坍塌的水合物储层最低钻井液密度. 断块油气田. 2019(05): 657-661 .
![]() |