Performance Analysis and Optimization of the Anchor Mechanism of Coupling Anchor Type Downhole Throttle

XU Jianning; ZHENG Shunze; LI Zhongwen; XI Wenkui; WEI Yaming; YANG Xudong

doi:10.11911/syztjs.2018053

Volume 46 Issue 2

Mar. 2018

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2018 > 46(2): 103-108. > DOI: 10.11911/syztjs.2018053

XU Jianning, ZHENG Shunze, LI Zhongwen, XI Wenkui, WEI Yaming, YANG Xudong. Performance Analysis and Optimization of the Anchor Mechanism of Coupling Anchor Type Downhole Throttle[J]. Petroleum Drilling Techniques, 2018, 46(2): 103-108. DOI: 10.11911/syztjs.2018053

Citation:

PDF (1380 KB)

Performance Analysis and Optimization of the Anchor Mechanism of Coupling Anchor Type Downhole Throttle

1.
School of Mechanical Engineering, Xi’an Shiyou University, Xi’an, Shaanxi, 710056, China;
2.
Gansu Fengshou Machinery Co., Ltd., Pingliang, Gansu, 744003, China;
3.
Oil & Gas Technology Research Institute, PetroChina Changqing Oilfield Company, Xi’an, Shaanxi, 710018, China;
4.
National Engineering Laboratory for Exploration and Development of Low-Permeability Oil and Gas Fields, Xi’an, Shaanxi, 710018, China

More Information

Received Date: November 28, 2017

Graphical Abstract

Abstract

Abstract

The slip-type downhole throttle widely used now in Sulige Gas Field has the problems of complex releasing process and low retrieving success rate caused by slip seizing tubing in throttle retrieving.Therefore,a new type downhole throttle was developed,which is fixed on the gap of tubing coupling groove by means of claw anchor,with the characteristics of easy releasing,without clamping the tubing tightly,no slippage,and retrievable in one run of wireline operation.In order to improve the working performance of anchor mechanism of the new type downhole throttle,ANSYS finite element analysis software was used to establish the finite element models for anchor mechanism and tubing coupling,so as to simulate the working process of the anchoring mechanism during anchoring and retrieving.The central combination design method was used to establish the mathematical models for describing the effect of length and thickness of the jaw on the minimum retrieving force and the maximum stress on the jaw while jarring it downward.Through analysis of the effect regularity,the optimum length and thickness of the jaw were determined as 95.6 mm and 2.9 mm respectively.In this case,the better anchoring performance was obtained,the minimum retrieving force was 1.9 kN,and the maximum stress applied on the jaw during jarring downward was 732 MPa,significantly improved the performance compared with that of the original structure.The research results showed that the anchor mechanism of the new type downhole throttle was reasonable in design,and the jaw parameter combination of anchoring mechanism was optimized while ensuring the safe operation of anchor mechanism of throttle,which can provide technical support for the field application of this new downhole throttle in the future.
- downhole throttle,
- anchor mechanism,
- retrieving performance,
- central combination design method,
- mathematical model

FullText(HTML)

References (14)

References

[1]	王京舰,王一妃,管磊磊,等.神木气田产水气井井下节流参数优化设计[J].断块油气田,2017,24(1):101-104. WANG Jingjian,WANG Yifei,GUAN Leilei,et al.Optimal design of downhole throttling parameters for water produced gas well in Shenmu Gas Field[J].Fault-Block Oil Gas Field,2017,24(1):101-104.
[2]	宋中华,张士诚,王腾飞,等.塔里木油田高压气井井下节流防治水合物技术[J].石油钻探技术,2014,42(2):91-96. SONG Zhonghua,ZHANG Shicheng,WANG Tengfei,et al.Downhole throttling technology for gas hydrate prevention in deep gas wells of Tarim Oilfield[J].Petroleum Drilling Techniques,2014,42(2):91-96.
[3]	王锦昌.东胜气田井下节流参数优化方法及其应用[J].天然气勘探与开发,2017,40(2):50-55. WANG Jinchang.Downhole throttling parameter optimization method and its application in Dongsheng Gas Field[J].Natural Gas Exploration and Development,2017,40(2):50-55.
[4]	李荣峰.井下节流工艺在徐深气田的试验应用[J].天然气技术与经济,2012,6(1):45-47. LI Rongfeng.Application of downhole choke technology to Xushen Gasfield[J].Natural Gas Technology and Economy,2012,6(1):45-47.
[5]	张守良,马发明.天然气井下节流技术[M].北京:石油工业出版社,2015:85-98. ZHANG Shouliang,MA Faming.Natural gas downhole throttling technology[M].Beijing:Petroleum Industry Press,2015:85-98.
[6]	徐建宁,单勇,王维旭,等.石油钻采机械[M].青岛:中国石油大学出版社,2015:244-267. XU Jianning,SHAN Yong,WANG Weixu,et al.Oil drilling production machinery[M].Qingdao:China Petroleum University Press,2015:244-267.
[7]	谷成义,冯朋鑫,王晓荣,等.HY-4型节流器在苏里格气田的应用[J].石油钻采工艺,2010,32(4):120-122. GU Chengyi,FENG Pengxin,WANG Xiaorong,et al.Application of HY-4 down-hole choke in Sulige Gas Field[J].Oil Drilling Production Technology,2010,32(4):120-122.
[8]	胡丹,侯治民,滕汶江,等.新型活动式井下节流器的研制及应用[J].石油钻采工艺,2014,36(3):123-125. HU Dan,HOU Zhimin,TENG Wenjiang,et al.Development and application of a new mobile-type downholechoke[J].Oil Drilling Production Technology,2014,36(3):123-125.
[9]	许剑,赵哲军.川西气田井下节流推广技术瓶颈及解决方案[J].中外能源,2017,22(4):43-46. XU Jian,ZHAO Zhejun.Bottleneck and solutions of downhole throttling technology popularization in West Sichuan Gas Field[J].Sino-Global Energy,2017,22(4):43-46.
[10]	喻成刚,张华礼,邓友超.新型井下节流器研制及应用[J].钻采工艺,2008,31(4):91-93. YU Chenggang,ZHANG Huali,DENG Youchao.Development and application of new downholethrottle[J].Drilling Production Technology,2008,31(4):91-93.
[11]	蒋发光,梁政,李莲明,等.73 mm油管用井下节流器卡定系统研究[J].石油矿场机械,2010,39(11):49-52. JIANG Faguang,LIANG Zheng,LI Lianming,et al.Study of downhole choke’s slips system in 73 mm oil piple[J].Oil Drilling Production Technology,2010,39(11):49-52.
[12]	李韩博,杨明顺,李言,等.响应曲面法在SPIF表面粗糙度预测及多目标优化中的应用[J].机械科学与技术,2017,36(12):1896-1905. LI Hanbo,YANG Mingshun,LI yan,et al.Application of responses surface methodology in prediction and multi-objective optimization of surface roughness in SPIF[J].Mechanical Science and Technology for Aerospace Engineering,2017,36(12):1896-1905.
[13]	刘东雷,申长雨,刘春太,等.基于响应曲面法与改进遗传算法的RHCM成型工艺优化[J].机械工程学报,2011,47(14):54-61. LIU Donglei,SHEN Changyu,LIU Chuntai,et al.Efficient process parameters optimization of rapid heat cycling molding technology based on response surface methodology and improved genetic algorithm[J].Journal of Mechanical Engineering,2011,47(14):54-61.
[14]	CAMPATELLI G,LORENZINI L,SCIPPA A.Optimization of process parameters using a response surface method for minimizing power consumption in the milling of carbon steel[J].Journal of Cleaner Production,2014,66:309-316.

[1]	YU Haitang, DING Yi, LIU Yanmei, PENG Miao, LIANG Lixi, YU Xiaolong. A Dynamical Spontaneous Imbibition Model for ShaleConsidering Hydration Damage[J]. Petroleum Drilling Techniques, 2023, 51(5): 139-148. DOI: 10.11911/syztjs.2023054
[2]	WANG Tao, LI Yao, HE Hui. A Coupling Allocation Model of Finely Layered Water Injection Considering Pressure Constraint[J]. Petroleum Drilling Techniques, 2023, 51(2): 95-101. DOI: 10.11911/syztjs.2023012
[3]	DENG Yong, CHEN Mian, JIN Yan, LU Yunhu, ZOU Daiwu. Prediction Model and Numerical Simulation for Rock Fissure Length under Impact Load[J]. Petroleum Drilling Techniques, 2016, 44(4): 41-46. DOI: 10.11911/syztjs.201604008
[4]	CEN Xueqi, WU Xiaodong, WANG Lei, ZHENG Lei, GE Lei. A New Model for Calculating the Ideal Beam Counterbalance Weight for a Pumping Unit[J]. Petroleum Drilling Techniques, 2016, 44(2): 82-86. DOI: 10.11911/syztjs.201602014
[5]	WENG Dingwei, FU Haifeng, LU Yongjun, ZHENG Lihui, MA Jianjun. A Model for Predicting the Volume of Stimulated Reservoirs[J]. Petroleum Drilling Techniques, 2016, 44(1): 95-100. DOI: 10.11911/syztjs.201601018
[6]	Ma Shuai, Zhang Fengbo, Hong Chuqiao, Liu Shuangqi, Zhong Jiajun, Wang Shichao. Development and Solution to the Coupling Model of the Productivity of Interbeded Reserviors in Stepped Horizontal Wells[J]. Petroleum Drilling Techniques, 2015, 43(5): 94-99. DOI: 10.11911/syztjs.201505016
[7]	Li Daqi, Kang Yili, Liu Xiushan, Chen Zengwei, Si Na. Progress in Drilling Fluid Loss Dynamics Model for Fractured Formations[J]. Petroleum Drilling Techniques, 2013, 41(4): 42-47. DOI: 10.3969/j.issn.1001-0890.2013.04.010
[8]	Wu Shinan, Zhang Jinlong, Ding Shidong, Liu Jian. Revision of Mathematical Model of Foamed Cement Slurry Density under Down-Hole Conditions[J]. Petroleum Drilling Techniques, 2013, 41(2): 28-33. DOI: 10.3969/j.issn.1001-0890.2013.02.006
[9]	Meng Hongxia, Chen Dechun, Pan Zhihua, Wu Xiaodong. Productivity Calculation Models and Stimulation Ratio Analysis for Explosive Fracturing Wells[J]. Petroleum Drilling Techniques, 2012, 40(6): 62-66. DOI: 10.3969/j.issn.1001-0890.2012.06.013
[10]	Liang Erguo, Li Zifeng, Zhao Jinhai. Model for Collapsing Strength Calculation of Worn Casing[J]. Petroleum Drilling Techniques, 2012, 40(2): 41-45. DOI: 10.3969/j.issn.1001-0890.2012.02.008

Cited By

Cited by

Periodical cited type(4)

1.	刘时春，杨旭东，田伟，贾友亮，肖述琴，魏延萍，赵彬彬，卫亚明. 天然气井下节流技术的研究与应用进展. 内蒙古石油化工. 2024(09): 76-82 .
2.	席文奎，王科强，贾超. 基于响应曲面法的井下节流器密封结构分析及优化. 机电工程技术. 2023(03): 117-120 .
3.	徐慧斌，赵义鹏，邓冲，鲁小东. 新型顶驱下套管工具的设计及研究. 机电工程技术. 2022(01): 65-68+79 .
4.	王鹏. 井下节流器结构优化在采气过程中的节能作用. 石油石化节能. 2020(05): 40-43+11 .

Other cited types(3)

Get Citation

PDF

XML

Article Metrics

Article views (1849) PDF downloads (2071) Cited by(7)

Performance Analysis and Optimization of the Anchor Mechanism of Coupling Anchor Type Downhole Throttle

Abstract

References

Related Articles

Cited by

Periodical cited type(4)

Other cited types(3)

Catalog

Article Metrics

Related

Performance Analysis and Optimization of the Anchor Mechanism of Coupling Anchor Type Downhole Throttle

Abstract

References

Related Articles

Cited by

Periodical cited type(4)

Other cited types(3)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content