Shen Jianzhong, Long Zhiping. Research and Application of Low Cost and Efficient CBM Drilling Technology in South Yanchuan[J]. Petroleum Drilling Techniques, 2015, 43(5): 69-74. DOI: 10.11911/syztjs.201505012
Citation: Shen Jianzhong, Long Zhiping. Research and Application of Low Cost and Efficient CBM Drilling Technology in South Yanchuan[J]. Petroleum Drilling Techniques, 2015, 43(5): 69-74. DOI: 10.11911/syztjs.201505012

Research and Application of Low Cost and Efficient CBM Drilling Technology in South Yanchuan

More Information
  • Received Date: December 16, 2014
  • Revised Date: June 15, 2015
  • Low reservoir volume and low single well production are bottlenecks that restrict coal bed methane(CBM) development, so how to improve the drilling efficiency and how to control the costs are the keys to the effective development of CBM. After summarizing the previous drilling experiences in South Yanchuan CBM block, the well factory drilling model was successfully applied and many technical research and field applications focused on reducing the cost and increasing benefits were carried out. Techniques included cluster well optimization, preventive deviation anticollision, navigational BHA, individualized bit design, efficient leak stoppage, etc. Then, the learning curve was used to optimize and improve key technologies and develop low cost and efficient drilling technology. Low cost and efficient drilling technology that was developed in the South Yanchuan CBM Block was applied to 808 wells and the operations were performed with good quality and high efficiency, in which the average single well drilling cycle was shortened by more than 30.3%, and productivity construction and penetration rate were improved by over 51.6%. The application showed that the well factory drilling mode could be employed in the field of CBM development to significantly control drilling costs, improve the efficiency to cost-effectively develop CBM.
  • [1]
    郑毅,黄洪春.中国煤层气钻井完井技术发展现状及发展方向[J].石油学报,2002,23(3):81-85. Zheng Yi,Huang Hongchun.Development of drilling and completion technology of coal-bed methane wells in China[J].Acta Petrolei Sinica,2002,23(3):81-85.
    [2]
    王彦祺.延川南区块煤层气高效开发钻完井工艺技术探讨[J].油气藏评价与开发,2011,1(1):64-68. Wang Yanqi.Discussion about the efficient development of CBM in Yanchuannan Block and drilling completion technology[J].Reservoir Evaluation and Development,2011,1(1): 64-68.
    [3]
    张金成,孙连忠,王甲昌,等."井工厂"技术在我国非常规油气开发中的应用[J].石油钻探技术,2014,42(1):20-25. Zhang Jincheng,Sun Lianzhong,Wang Jiachang,et al.Application of multi-well pad in unconventional oil and gas development in China[J].Petroleum Drilling Techniques,2014,42(1):20-25.
    [4]
    陈平,刘阳,马天寿.页岩气"井工厂"钻井技术现状及展望[J].石油钻探技术,2014,42(3):1-7. Chen Ping,Liu Yang,Ma Tianshou.Status and prospect of multi-well pad drilling technology in shale gas[J].Petroleum Drilling Techniques,2014,42(3):1-7.
    [5]
    周贤海,臧艳彬.涪陵地区页岩气山地"井工厂"钻井技术[J].石油钻探技术,2015,43(3):45-49. Zhou Xianhai,Zang Yanbin.Application of"well factory"drilling technology in the Fuling shale gas field[J].Petroleum Drilling Techniques,2015,43(3):45-49.
    [6]
    刘乃震.苏53区块"井工厂"技术[J].石油钻探技术,2014,42(5):21-25. Liu Naizhen.Application of factory drilling technology in Block Su 53[J].Petroleum Drilling Techniques,2014,42(5):21-25.
    [7]
    刘社明,张明禄,陈志勇,等.苏里格南合作区工厂化钻完井作业实践[J].天然气工业,2013,33(8):64-69. Liu Sheming,Zhang Minglu,Chen Zhiyong,et al.Factory-like drilling and completion practices in the joint gas development zone of the South Sulige Project[J].Natural Gas Industry,2013,33(8):64-69.
    [8]
    李鹴,King-Kai H,Todd Franks,等.四川盆地金秋区块非常规天然气工厂化井作业设想[J].天然气工业,2013,33(6):54-59. Li Shuang,King-Kai H,Todd Franks,et al.Design highlights of factory-like production of unconventional natural gas wells in the Jinqiu Block,Sichuan Basin[J].Natural Gas Industry,2013,33(6):54-59.
    [9]
    李清,赵兴龙,谢先平,等.延川南区块煤层气井高产水成因分析及排采对策[J].石油钻探技术,2013,41(6):95-99. Li Qing,Zhao Xinglong,Xie Xianping,et al.Causes of high water yield from CBM wells in Yanchuannan Block and draining measure[J].Petroleum Drilling Techniques,2013,41(6):95-99.
    [10]
    袁明进,龙志平,朱智超.鄂尔多斯盆地延川南区块煤层气低成本高效钻井技术[J].中国煤层气,2011,8(5):17-21. Yuan Mingjin,Long Zhiping,Zhu Zhichao.Low cost and efficient CBM well drilling technology in Yanchuannan Block of Erdos Basin[J].China Coalbed Methane,2011,8(5):17-21.
    [11]
    毛志新.保德区块煤层气丛式井快速钻井技术研究[J].探矿工程:岩土钻掘工程,2012,39(2):12-14. Mao Zhixin.Research on faster drilling technology of coal-bed methane cluster wells[J].Exploration Engineering:Rock Soil Drilling and Tunneling,2012,39(2):12-14.
    [12]
    王恒,崔永辉.草4丛式井组相碰事故经验与教训[J].钻采工艺,2007,30(4):151,158. Wang Heng,Cui Yonghui.Lesson and experience of collision in Cao 4 cluster wells[J].Drilling Production Technology,2007,30(4):151,158.
    [13]
    宋世超,余维初,邓钧耀.鄂尔多斯东部区块煤层气井防漏、堵漏技术措施[J].石油天然气学报,2013,35(3):324-326. Song Shichao,Yu Weichu, Deng Junyao.Technique measures of coalbed methane wells leak proof and plugging in Eastern Block of Erdos Basin[J].Journal of Oil and Gas Technolog,2013,35(3):324-326.
    [14]
    杨力.延川南煤层气工区地层漏失特点及对策[J].中国煤层气,2011,8(3):8-10. Yang Li.Characteristics and counter-measures against loss of circulation in strata in Yanchuannan CBM work section[J].China Coalbed Methane,2011,8(3):8-10.
    [15]
    杨玉凤,吴秀芹,卜华.学习曲线在成本预测中的应用[J].淮海工学院学报:自然科学版,2000,9(2):74-76. Yang Yufeng,Wu Xiuqin,Bu Hua.The application of learning curve in cost estimation[J].Journal of Huaihai Institute of Technology:Natural Science Edition,2000,9(2):74-76.
    [16]
    李遭均.学习曲线及其应用[J].外国经济管理,1982(5):52-56. Li Zaojun.Learning curve and its application[J].Foreign Economic Management,1982(5):52-56.
  • Related Articles

    [1]SHI Peiming, LI Xiaoming, NI Huafeng, SHI Chongdong, JIANG Qingbo, CHENG Hualin. Casing Program Optimization and Drilling Matching Technologies for Horizontal Wells in Sulige Gas Field[J]. Petroleum Drilling Techniques, 2021, 49(6): 29-36. DOI: 10.11911/syztjs.2021057
    [2]YIN Huibo, SUO Zhongwei, LI Bodong, TU Yulin. Drilling Rate Improvement Technology Adopted in Well HWY-116 of the HWY Block, Saudi Arabia[J]. Petroleum Drilling Techniques, 2020, 48(5): 34-38. DOI: 10.11911/syztjs.2020048
    [3]SU Zhenguo, TANG Zhijun. The Design and Field Testing of Two-Stage and Two-Speed Drilling Tools[J]. Petroleum Drilling Techniques, 2019, 47(1): 59-64. DOI: 10.11911/syztjs.2019010
    [4]CUI Hailin, ZHOU Yanjun, TANG Honglin, CAO Liming, SUN Ronghua, XIAO Xinlei. Integrated Wellbore Technologies to Enhance the Rate of Penetration for Well Dingye 5[J]. Petroleum Drilling Techniques, 2018, 46(1): 24-29. DOI: 10.11911/syztjs.2018029
    [5]LIN Siyuan, LI Zhong, HUANG Yi, CHEN Haodong, YANG Yuhao, GAO Jiji. Technique for Enhancing the Rate of Penetration through the Application of a New PDC Bit with Rotary Cutters in Deep Formations in the Wenchang Block[J]. Petroleum Drilling Techniques, 2017, 45(6): 65-69. DOI: 10.11911/syztjs.201706012
    [6]Li Kezhi, Yan Jizeng. Difficulties and Technical Countermeasures for Improving Penetration Rate of Horizontal Wells in Honghe Oilfield[J]. Petroleum Drilling Techniques, 2014, 42(2): 117-122. DOI: 10.3969/j.issn.1001-0890.2014.02.023
    [7]Zhu Zhongxi, Liu Yingbiao, Lu Zongyu, Xiong Xudong. Increasing the Penetration Rate for Piedmont Belt of Junggar Basin[J]. Petroleum Drilling Techniques, 2013, 41(2): 34-38. DOI: 10.3969/j.issn.1001-0890.2013.02.007
    [8]Jin Yequan, Wang Maolin. PDC Bit Drilling Parameter Optimization Design Integrating Cost and Drilling Rate[J]. Petroleum Drilling Techniques, 2012, 40(5): 13-16. DOI: 10.3969/j.issn.1001-0890.2012.05.003
    [9]Peng Ye, Wang Minghua, Guan Shuwei, Wang Mingrui, Chen Xi. Experimental Study of the Interlayer Effect in Impregnated Diamond Blocks on ROP and Wear Extent[J]. Petroleum Drilling Techniques, 2012, 40(2): 113-116. DOI: 10.3969/j.issn.1001-0890.2012.02.022
    [10]Effect of Drilling Fluid Inorganic Salt on Rate of Penetration[J]. Petroleum Drilling Techniques, 2011, 39(4): 48-52. DOI: 10.3969/j.issn.1001-0890.2011.04.010
  • Cited by

    Periodical cited type(6)

    1. 聂志宏,徐凤银,时小松,熊先钺,宋伟,张雷,刘莹,孙伟,冯延青,刘世瑞,闫霞,孙潇逸,吴满生. 鄂尔多斯盆地东缘深部煤层气开发先导试验效果与启示. 煤田地质与勘探. 2024(02): 1-12 .
    2. 刘易. 丛式井勘探开发集约解决单井场运行成本高难题. 石油钻采工艺. 2024(02): 164-174+188 .
    3. 崔春兰,董振国,吴德山. 新街台格庙矿区煤层气参数井钻井关键技术. 煤田地质与勘探. 2019(S1): 128-134 .
    4. 闫联国,徐壁华. 延川南煤气层气固井低密度水泥浆技术研究. 内蒙古石油化工. 2017(02): 54-58 .
    5. 薛江云,刘双林. 煤层气抽采及高效利用技术探究及应用. 化工管理. 2016(28): 149 .
    6. 王运海. 延川南区块煤层气丛式井钻完井工艺技术. 煤炭科学技术. 2016(05): 23-29 .

    Other cited types(2)

Catalog

    Article Metrics

    Article views (3373) PDF downloads (3736) Cited by(8)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return