Jetting-Based Conductor Running Technology Used in Ultra-Deep Water Well of Lingshui Block in the Western South China Sea
-
摘要: 南海西部陵水区块平均水深1 710.00 m，区域海况恶劣，为了提高导管下入作业效率，保证水下井口的稳定性，采用喷射钻井技术下导管。对陵水区块海底浅层土壤进行取样分析，得到了导管承载力曲线；对导管载荷进行分析，确定了区域导管安全入泥深度；在综合分析喷射钻井技术与钻具组合特点的基础上，对钻头伸出量、钻头直径、钻压和水力参数进行了优选，确定了导管入泥深度。陵水区块5口井应用了喷射下导管技术，结果表明，井口稳定性均较好，导管下入过程顺利，没有出现导管下沉或倾斜的问题。陵水区块超深水井喷射下导管技术的成功应用，为以后类似超深水井的钻井作业提供了技术参考。Abstract: The sea area of Lingshui Block in Western South China Sea is rough with average water depth of 1710.00 m. In this paper, jet drilling technology was used to run in conductors in order to ensure the stability of underwater wellheads and improve running efficiency of conductors. First, the load capacity curve of conductors was plotted by analyzing the soil samples taken from shallow sea beds in Lingshui Block. Second, the safe driving depth of conductors in this block was determined by analyzing the load on conductors. Finally, bit stick-out, bit diameter, WOB and hydraulic parameters were optimized by analyzing comprehensively the characteristics of jet drilling technologies and BHA (bottom hole assembly) used for ultra-deep water environments, and then the driving depth of conductors was determined. The jetting-based conductor running technology was applied on 5 wells in the Lingshui Block. Results showed that wellheads in this block were of good stability. The conductors were then run in holes successfully without deviation or subsidence. The successful application of jetting-based conductor running technology of Lingshui ultra-deep water block provides the technical inference for the drilling of similar ultra-deep water wells in the future.
-
Keywords:
- conductor /
- jet drilling /
- driving depth /
- load capacity /
- Well LSX-1-1 /
- Lingshui Block /
- Western South China Sea
-
-
[1] 杨进,严德,田瑞瑞,等.深水喷射下表层导管合理钻头伸出量计算[J].石油勘探与开发,2013,40(3):367-370. YANG Jin,YAN De,TIAN Ruirui,et al.Bit stick-out calculation for the deepwater conductor jetting technique[J].Petroleum Exploration and Development,2013,40(3):367-370. [2] 鞠少栋,畅元江,陈国明,等.深水钻井隔水管连接作业窗口分析[J].石油勘探与开发,2012,39(1):105-110. JU Shaodong,CHANG Yuanjiang,CHEN Guoming,et al.Envelopes for connected operation of the deepwater drilling riser[J].Petroleum Exploration and Development,2012,39(1):105-110. [3] 马飞,宋志辉.水射流动力特性及破土机理[J].北京科技大学学报,2006,28(5):413-416. MA Fei,SONG Zhihui.Dynamic property and breaking soil mechanism of water jet[J].Journal of University of Science and Technology Beijing,2006,28(5):413-416. [4] BECK R D,JACKSON C W,HAMILTON T K.Reliable deepwater structural casing installation using controlled jetting[R].SPE 22542,1991.
[5] 徐荣强,陈建兵,刘正礼,等.喷射导管技术在深水钻井作业中的应用[J].石油钻探技术,2007,35(3):19-22. XU Rongqiang,CHEN Jianbing,LIU Zhengli,et al.The application of jetting technology in deepwater drilling[J].Petroleum Drilling Techniques,2007,35(3):19-22. [6] 刘书杰,杨进,周建良,等.深水海底浅层喷射钻进过程中钻压与钻速关系[J].石油钻采工艺,2011,33(1):12-15. LIU Shujie,YANG Jin,ZHOU Jianliang,et al.Research on relationship between weight-on-bit and drilling rate during jetting drilling in sub-bottom deepwater[J].Oil Drilling Production Technology,2011,33(1):12-15. [7] 苏堪华,管志川,苏义脑.深水钻井导管喷射下入深度确定方法[J].中国石油大学学报(自然科学版),2008,32(4):47-50. SU Kanhua,GUAN Zhichuan,SU Yinao.Determination method of conductor setting depth using jetting drilling in deepwater[J].Journal of China University of Petroleum(Edition of Natural Science),2008,32(4):47-50. [8] BRIDGE J W.Summary of results from a joint industry study todevelop and improved methodology for predict ion of geopressures for drilling in deepwater[R].SPE 79845,2003.
[9] 张辉,高德利,唐海雄,等.深水导管喷射安装过程中管柱力学分析[J].石油学报,2010,31(3):516-520. ZHANG Hui,GAO Deli,TANG Haixiong,et al.Tubular mechanics in jetting operation of conductor under deepwater condition[J].Acta Petrolei Sinica,2010,31(3):516-520. [10] 陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:52-65. CHEN Tinggen,GUAN Zhichuan.Theory and technology of drilling engineering[M].Dongying:Petroleum UniversityPress,2000:52-65. [11] 胡海良,唐海雄,汪顺文,等.白云6-1-1井深水钻井技术[J].石油钻采工艺,2008,30(6):25-28. HU Hailiang,TANG Haixiong,WANG Shunwen,et al.Deepwater drilling techniques in Baiyun 6-1-1 Well[J].Oil Drilling Production Technology,2008,30(6):25-28. [12] 周波,杨进,周建良,等.深水钻井喷射下导管排量设计方法[J].石油钻探技术,2016,44(3):21-26. ZHOU Bo,YANG Jin,ZHOU Jianliang,et al.A jetting flow rate design method for conductor installation through jetting in deepwater drilling[J].Petroleum Drilling Techniques,2016,44(3):21-26. [13] 李家仪,许亮斌,周建良,等.基于非概率可靠性的喷射导管下入深度设计方法[J].石油钻探技术,2015,43(4):8-12. LI Jiayi,XU Liangbin,ZHOU Jianliang,et al.Design for the setting depth of jetting conductors based on non-probabilistic reliability[J].Petroleum Drilling Techniques,2015,43(4):8-12. [14] 王磊,张辉,周宇阳,等.深水钻井喷射下导管水力参数优化设计方法[J].石油钻探技术,2015,43(2):19-24. WANG Lei,ZHANG Hui,ZHOU Yuyang,et al.Optimal design of hydraulic parameters for conductor jetting in deepwater drilling[J].Petroleum Drilling Techniques,2015,43(2):19-24. [15] 林广辉.随钻下套管技术:在我国南海油田的首次应用[J].中国海上油气(工程),1996,8(1):53-58. LIN Guanghui.Casing while drilling technique first application in China Nanhai[J].China Offshore Oil and Gas(Engineering),1996,8(1):53-58. [16] 翟慧颖,杨进,周建良,等.隔水导管与土壤胶结强度试验分析研究[J].石油钻采工艺,2008,30(2):36-37,41. ZHAI Huiying,YANG Jin,ZHOU Jianliang,et al.Analysis and research of cementing strength tests between water isolation tube and soil[J].Oil Drilling Production Technology,2008,30(2):36-37,41. -
期刊类型引用(10)
1. 栾凯伦，高斐，楼一珊，黄梦婷. 基于BP神经网络的井壁坍塌预测. 矿产勘查. 2025(02): 371-379 . 
百度学术
2. 傅玉，蒲杨. 长裸眼水平段超深井完井液密度对井壁稳定的重要性剖析. 天然气技术与经济. 2024(06): 15-19+63 . 百度学术
3. 王磊. 基于瞬态热流固耦合的钻井井壁稳定性分析. 断块油气田. 2023(02): 331-336 . 百度学术
4. 张文，刘向君，梁利喜，熊健. 致密砂岩地层气体钻井井眼稳定性试验研究. 石油钻探技术. 2023(02): 37-45 . 本站查看
5. 王丽君. 苏里格气田苏53区块防塌钻井液技术研究. 辽宁化工. 2022(09): 1264-1266+1298 . 百度学术
6. 何立成，唐波. 准噶尔盆地超深井钻井技术现状与发展建议. 石油钻探技术. 2022(05): 1-8 . 本站查看
7. 刘厚彬，崔帅，孟英峰，周彦行，罗益. 深层脆性页岩水平井井壁崩落失稳研究. 断块油气田. 2021(03): 323-328 . 百度学术
8. 邓媛，何世明，邓祥华，彭远春，何世云，汤明. 力化耦合作用下的层理性页岩气水平井井壁失稳研究. 石油钻探技术. 2020(01): 26-33 . 本站查看
9. 张磊，许杰，刘海龙，谢涛，韩耀图. 层理性地层井壁坍塌失稳规律研究. 石油机械. 2019(02): 24-32 . 百度学术
10. 向朝纲，陈俊斌，杨刚. 钻井液浸泡作用下脆性页岩强度特征实验. 断块油气田. 2018(06): 803-806 . 百度学术
其他类型引用(4)
计量
- 文章访问数: 20684
- HTML全文浏览量: 180
- PDF下载量: 16260
- 被引次数: 14
下载:
