基于统一强度理论的牙齿侵入井底岩石的机理分析

李玮, 闫铁, 陈世春, 丛长江

李玮, 闫铁, 陈世春, 丛长江. 基于统一强度理论的牙齿侵入井底岩石的机理分析[J]. 石油钻探技术, 2013, 41(4): 32-36. DOI: 10.3969/j.issn.1001-0890.2013.04.008
引用本文: 李玮, 闫铁, 陈世春, 丛长江. 基于统一强度理论的牙齿侵入井底岩石的机理分析[J]. 石油钻探技术, 2013, 41(4): 32-36. DOI: 10.3969/j.issn.1001-0890.2013.04.008
Li Wei, Yan Tie, Chen Shichun, Cong Changjiang. Mechanism Analysis of Tooth Sink into Rock Based on Unified Strength Theory[J]. Petroleum Drilling Techniques, 2013, 41(4): 32-36. DOI: 10.3969/j.issn.1001-0890.2013.04.008
Citation: Li Wei, Yan Tie, Chen Shichun, Cong Changjiang. Mechanism Analysis of Tooth Sink into Rock Based on Unified Strength Theory[J]. Petroleum Drilling Techniques, 2013, 41(4): 32-36. DOI: 10.3969/j.issn.1001-0890.2013.04.008

基于统一强度理论的牙齿侵入井底岩石的机理分析

基金项目: 

国家重点基础研究发展计划("973"计划)项目"深井复杂地层破岩机理与高效破岩方法"(编号:2010CB226703);国家自然科学"钻头谐振激励下岩石的响应机制及破碎机理研究"(编号:51274072);国家科技重大专项"碳酸盐岩;火成岩及酸性气藏高效安全钻完井技术"(编号:2011ZX05021-002)部分研究内容。

详细信息
    作者简介:

    李玮(1978—),男,吉林榆树人,2003年毕业于大庆石油学院石油工程专业,2010年获东北石油大学油气井工程专业博士学位,副教授,主要从事钻井工艺、岩石力学和高效破岩等方面的研究。

  • 中图分类号: TE21

Mechanism Analysis of Tooth Sink into Rock Based on Unified Strength Theory

  • 摘要: 为了弄清深部地层复杂钻进条件下的牙轮钻头破岩机理,研究了牙轮钻头牙齿侵入井底岩石问题。在考虑井底压力的条件下,基于统一强度理论对牙齿侵入岩石的力学过程进行了分析,建立了含有统一强度参数的井底岩石侵入方程,并给出了不受轴向载荷、侵入深度和刃尖角影响的侵入系数。该方程考虑中间应力对井底岩石侵入系数的影响,在中间主剪应力的效应系数为0时,方程计算结果与Mohr-Coulomb强度理论所得结果完全相同。根据侵入方程,分析了内摩擦角、液柱压力、孔隙压力和刃尖角对侵入系数的影响。结果表明,侵入系数随中间主剪应力的效应系数的增大而增大,随内摩擦角和刃尖角的增大呈指数增大,随液柱压力的增大呈线性增大,随孔隙压力的增大呈线性减小。研究结果为牙轮钻头的现场应用提供了理论指导。
    Abstract: In order to figure out the rock breaking mechanism in complex formation conditions,the teeth cutting into rock in bottom was studied. Considering the condition of the bottom hole pressure,based on unified strength theory,the mechanical process of teeth cutting into rock was analyzed,bottomhole rock sinking equation with unified strength parameters was established and sinking coefficient without the impact of axial load,invasion depth and bit angle have been worked out. The equation considers the impact of intermediate stress on sinking coefficient. The results of the equation and Mohr-Coulomb strength theory are identical when the effect coefficient of intermediate principal shear stress equals 0. The impact of angle of internal friction,fluid column pressure,pore pressure and bit tooth angle on sinking coefficient were analyzed based on sinking equation. The results show that the sinking coefficient increases with the increase of effect coefficient of intermediate principal shear stress,increases exponentially with the increase of angle of internal friction and bit tooth angle,increases linearly with the increase of fluid column pressure,and decreases linearly with the increase of pore pressure. The analysis of rock breaking mechanism of teeth can provide further theory guidance for cone bit onsite application.
  • [1] 赖海辉,朱成忠,李夕兵,等.机械岩石破碎学[M].长沙:中南工业大学出版社,1991:1-15. Lai Haihui,Zhu Chengzhong,Li Xibing,et al.Mechanical rock fragmentation[M].Changsha:Central South University of Technology Press,1991:1-15.
    [2] 徐小荷,余静.岩石破碎学[M].北京:煤炭工业出版社,1984:108-115. Xu Xiaohe,Yu Jing.Rock fragmentation[M].Beijing:China Coal Industry Publishing House,1984:108-115.
    [3] 王清峰,朱才朝,宋朝省,等.牙轮钻头单牙轮的破岩仿真研究[J].振动与冲击,2010,29(10):108-112. Wang Qingfeng,Zhu Caichao,Song Chaosheng,et al.Non-linear dynamic analysis of a roller cone bit-well rock system with rock-cone bit interaction[J].Journal of Vibration and Shock,2010,29(10):108-112.
    [4] 胡琴,刘清友.复合齿形牙轮钻头及其破岩机理研究[J].天然气工业,2006,26(4):77-79. Hu Qin,Liu Qingyou.Study on cone bit with composite tooth and its breaking mechanism[J].Natural Gas Industry,2006,26(4):77-79.
    [5] 闫铁,李玮,毕雪亮,等.旋转钻井中岩石破碎能耗的分形分析[J].岩石力学与工程学报,2008,27(增刊2):3649-3654. Yan Tie,Li Wei,Bi Xueliang,et al.Fractal analysis of energy consumption of rock fragmentation in rotary drilling[J].Chinese Journal of Rock Mechanics and Engineering,2008,27(supplement 2):3649-3654.
    [6] 杨进.岩石抗钻强度与地层孔隙压力关系模型及其应用[J].石油大学学报:自然科学版,2001,25(2):1-5. Yang Jin.Correlation model of rock strength and formation pore pressure and application of the modle[J].Journal of the University of Petroleum,China:Edition of Natural Science,2001,25(2):1-5.
    [7] 刘永贵,王洪英.徐深气田气体钻井破岩机理的初步研究[J].石油学报,2008,29(5):773-776. Liu Yonggui,Wang Hongying.Initial research on rock breaking mechanism for gas drilling in Xushen Gas Field[J].Acta Petrolei Sinica,2008,29(5):773-776.
    [8] 赵伏军,李夕兵,冯涛,等.动静载荷耦合作用下岩石破碎理论分析及试验研究[J].岩石力学与工程学报,2005,24(8):1315-1319. Zhao Fujun,Li Xibing,Feng Tao,et al.Theoretical analysis and experiments of rock fragmentation under coupling dynamic and static loads[J].Chinese Journal of Rock Mechanics and Engineering,2005,24(8):1315-1319.
    [9] 郑德帅,冯江鹏.井底压力对岩石破碎的影响机制及应用研究[J].岩土力学,2011,32(1):205-208. Zheng Deshuai,Feng Jiangpeng.Mechanism of effect of downhole pressures on rock failure and its applications[J].Rock and Soil Mechanics,2011,32(1):205-208.
    [10] 寇绍全,张宗贤,愈洁.压头侵入引起的岩石断裂[J].岩石力学与工程学报,1989,18(4):275-285. Kou Shaoquan,Zhang Zongxian,Yu Jie.Rock fracture under indentation[J].Chinese Journal of Rock Mechanics and Engineering,1989,18(4):275-285.
    [11] 俞茂宏.强度理论新体系[M].西安:西安交通大学出版社,1992:249-289. Yu Maohong.New system of strength theory[M].Xi’an:Xi’an Jiaotong University Press,1992:249-289.
    [12] 俞茂宏.双剪理论及其应用[M].北京:科学出版社,1998:32-41. Yu Maohong.Twin shear theory and its application[M].Beijing:Science Press,1998:32-41.
    [13] 蒋明镜,沈珠江.岩土类软化材料的柱形孔扩张统一解问题[J].岩土力学,1996,17(1):1-8. Jiang Mingjing,Shen Zhujiang.Unified solution to expansion of cylindrical cavity for geomaterials with strain-softening behaviour[J].Rock and Soil Mechanics,1996,17(1):1-8.
    [14] 李杭州,廖红建,盛谦.基于统一强度理论的软岩损伤统计本构模型研究[J].岩石力学与工程学报,2006,25(7):1331-1336. Li Hangzhou,Liao Hongjian,Sheng Qian.Study on statistical damage constitutive model of soft rock based on unified strength theory[J].Chinese Journal of Rock Mechanics and Engineering,2006,25(7):1331-1336.
    [15]

    Ma Guowei,Yu Maohong,Iwasaki Shoji,et al.Unified elasto-plastic solution to rotating disc and cylinder[J].Journal of Structural Engineering,1995,41A:79-85.

计量
  • 文章访问数:  2754
  • HTML全文浏览量:  68
  • PDF下载量:  3731
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-03-09
  • 修回日期:  2013-06-20
  • 刊出日期:  1899-12-31

目录

    /

    返回文章
    返回