Perforation Spacing Optimization for Staged Fracturing of Horizontal Well
-
摘要: 为了使水平井分段压裂形成更为复杂的裂缝网络体系,提高油气井产量,以均质、各向同性的二维平面应变模型为基础,建立了人工裂缝诱导应力场数学模型,并结合诱导应力场中水平最大、最小主应力方向发生转向作为裂缝转向判断依据,形成了射孔间距优化方法。研究结果表明,随着裂缝间距的增大,诱导应力分量逐渐减小;裂缝间距一定时,在最小主应力方向附加的诱导应力比最大主应力方向附加的诱导应力大,两者之差呈现先增大后减小的变化趋势。对川西水平井射孔簇间距进行了优化,压裂后输气求产,与邻井选取较大射孔簇间距压裂求产对比,增产效果明显。该射孔间距优化方法对低渗透储层水平井分段压裂设计有一定的指导意义。Abstract: In order to form a more complex fracture network system in staged fracturing of horizontal wells so as to improve production rate,a new optimization method for perforation spacing has been established including a mathematical model of fractures induced stress filed on the basis of homogeneous and isotropic 2D plane strain model,and the diversion of maximum and minimum horizontal principal stress direction as the fracture reorientation criterion according to the general process of staged fracturing of horizontal wells.The results showed that the induced stress decreases gradually with the increase of fracture spacing.When the fracture spacing is constant,the induced stress in the direction of minimum stress is larger than that in the direction of maximum stress,and the difference between them first increases then decreases.The perforation spacing of horizontal wells in western Sichuan Basin was optimized by this method.Compared with the surrounding wells with large spacing of perforation set,the post-fracturing production rate of the horizontal wells with optimized perforation spacing improved greatly,which demonstrates this optimization method of perforation spacing has guiding significance to the staged fracturing design of horizontal wells in low-permeability reservoirs to some extent.
-
Keywords:
- horizontal well /
- staged fracturing /
- induced stress field /
- perforation spacing
-
-
[1] 李道品.低渗透油田开发[M].北京:石油工业出版社,1999:1-3. Li Daopin.The development of low permeability oilfield[M].Beijing:Petroleum Industry Press,1999:1-3. [2] 曲占庆,温庆志.水平井压裂技术[M].北京:石油工业出版社,2009:1-2. Qu Zhanqing,Wen Qingzhi.Horizontal well fracturing technology[M].Beijing:Petroleum Industry Press,2009:1-2. [3] 吕志凯,何顺利,罗富平,等.射孔水平井分段压裂起裂压力理论研究[J].石油钻探技术,2011,39(4):72-76. Lü Zhikai,He Shunli,Luo Fuping,et al.Study on hydraulic fracture initiation pressure of staged fracturing in perforated horizontal wells[J].Petroleum Drilling Techniques,2011,39(4):72-76. [4] 赵振峰,吴晓东,黄伟,等.特低渗透油藏压裂水平井产能影响因素分析[J].石油钻采工艺,2011,33(4):81-83. Zhao Zhenfeng,Wu Xiaodong,Huang Wei,et al.Influencing factor analysis of the productivity of fractured horizontal wells in ultra-low permeability reservoir[J].Oil Drilling Production Technology,2011,33(4):81-83. [5] 王腾飞,胥云,田助红,等.二次加砂压裂技术研究//中国石油油气藏改造重点实验室.2010年低渗透油气藏压裂酸化技术新进展.北京:石油工业出版社,2011:234-238. Wang Tengfei,Xu Yun,Tian Zhuhong,et al.Research of secondary sand frac fracturing technique//The Stimulation Key Laboratory of PetroChina.New progress in acid fracturing technology for low permeability reservoir in 2010.Beijing:Petroleum Industry Press,2011:234-238. [6] 苏玉亮,慕立俊,范文敏,等.特低渗透油藏油井压裂裂缝参数优化[J].石油钻探技术,2011,39(6):69-72. Su Yuliang,Mu Lijun,Fan Wenmin,et al.Optimization of fracturing parameters for ultra-low permeability reservoirs[J].Petroleum Drilling Techniques,2011,39(6):69-72. [7] 袁帅,李春兰,曾保全,等.压裂水平井裂缝参数优化实验[J].石油钻探技术,2010,38(4):99-103. Yuan Shuai,Li Chunlan,Zeng Baoquan,et al.Experimental study on optimization of fracture parameters in horizontal well fracturing[J].Petroleum Drilling Techniques,2010,38(4):99-103. [8] 唐汝众,温庆志,苏建,等.水平井分段压裂产能影响因素研究[J].石油钻探技术,2010,38(2):80-83. Tang Ruzhong,Wen Qingzhi,Su Jian,et al.Factors affecting productivity of stage fractured horizontal well[J].Petroleum Drilling Techniques,2010,38(2):80-83. [9] 谢远伟,李军亮,廖锐全,等.压裂井裂缝参数优化研究[J].断块油气田,2010,17(6):762-764. Xie Yuanwei,Li Junliang,Liao Ruiquan,et al.Study on fracture parameter optimization of fractured wells[J].Fault-Block Oil Gas Field,2010,17(6):762-764. [10] 高海红,程林松,曲占庆,等.压裂水平井裂缝参数优化研究[J].西安石油大学学报:自然科学版,2006,21(2):29-32. Gao Haihong,Cheng Linsong,Qu zhanqing,et al.Optimization of the fracture parameters of fractured horizontal wells[J].Journal of Xi’an Shiyou University:Natural Science Edition,2006,21(2):29-32. [11] 魏明臻,王鸿勋,张士诚,等.水平裂缝参数优化技术研究[J].断块油气田,1999,6(3):36-39. Wei Mingzhen,Wang Hongxun,Zhang Shicheng,et al.Technology research on patameters optimization of horizontal fracture[J].Fault-Block Oil Gas Field,1999,6(3):36-39. [12] 尚希涛,何顺利,刘广峰,等.水平井分段压裂破裂压力计算[J].石油钻采工艺,2009,31(2):96-100. Shang Xitao,He Shunli,Liu Guangfeng,et al.Breakdown pressure calculation of staged fracturing for horizontal wells[J].Oil Drilling Production Technology,2009,31(2):96-100. [13] Palmer I D.Induced stresses due to propped hydraulic fracture in coalbed methane wells.SPE 25861,1993.
[14] 张学文,方宏长,裘怿楠,等.低渗透率油藏压裂水平井产能影响因素[J].石油学报,1999,20(4):51-55. Zhang Xuewen,Fang Hongchang,Qiu Yinan,et al.A study on factors affecting the performance of hydraulically fractured horizontal well in low permeability reservoirs[J].Acta Petrolei Sinica,1999,20(4):51-55. [15] 李颖川.采油工程[M].2版.北京:石油工业出版社,2009:204-207. Li Yingchuan.Petroleum production engineering[M].2nd ed.Beijing:Petroleum Industry Press,2009:204-207.
计量
- 文章访问数: 3175
- HTML全文浏览量: 189
- PDF下载量: 3332
下载:
