[1] |
韩志勇.定向井设计与计算[M].北京:石油工业出版社,1989:134-139. Han Zhiyong.Directional well design and calculation[M].Beijing: Petroleum Industry Press,1989: 134-139.
|
[2] |
韩志勇.定向钻井设计与计算[M].东营:中国石油大学出版社,2007:167-170. Han Zhiyong.Design and calculation of directional drilling[M].Dongying: China University of Petroleum Press,2007: 167-170.
|
[3] |
鲁港,王立波,王冠军,等.二维圆弧型井眼轨道设计问题的通解[J].探矿工程:岩土钻掘工程,2009,36(1):9-13. Lu Gang,Wang Libo,Wang Guanjun,et al.General solution of 2D arc well trajectory design [J].Exploration Engineering:Rock Soil Drilling and Tunneling,2009,36(1):9-13.
|
[4] |
鲁港,余雷,李新强.二维S型剖面设计问题的解析解[J].石油地质与工程,2010,24(6):88-91. Lu Gang,Yu Lei,Li Xinqiang.Analytical solution of two-dimensional profile problem[J].Prteoleum Geology and Engineering,2010,24(6):88-91.
|
[5] |
高远文,鲁港.直-增-稳剖面设计问题的解析解[J].探矿工程:岩土钻掘工程,2010,37(1):13-15. Gao Yuanwen,Lu Gang.Analytical solutions of straight-buildup-stable profile design[J].Exploration Engineering:Rock Soil Drilling and Tunneling,2010,37(1):13-15.
|
[6] |
鲁港.限定井眼方向待钻轨道设计的代数法[J].西南石油大学学报:自然科学版,2009,31(5):158-162. Lu Gang.An algebraic method of borehole trajectory design with defined borehole direction[J].Journal of Southwest Petroleum University:Science Technology Edition,2009,31(5):158-162.
|
[7] |
方敏,鲁港,王立波.三维圆弧型井眼轨道设计模型的完全解[J].同济大学学报:自然科学版,2009,37(3):317-321. Fang Min,Lu Gang,Wang Libo.All solutions of 3D arc-typed well-path planning model [J].Journal of Tongji University:Natural Science,2009,37(3):317-321.
|
[8] |
鲁港,巩小明,曹传文,等.限定入靶井斜的双圆弧型纠偏轨道设计问题的全解[J].石油天然气学报,2009,31(1):75-79,99. Lu Gang,Gong Xiaoming,Cao Chuanwen,et al.All solutions to dual arc correcting trajectory design with restricted target-entering deviation [J].Journal of Oil and Gas Technology,2009,31(1):75-79,99.
|
[9] |
刘乃震,鲁港,佟长海.限定入靶方位的双圆弧型纠偏轨道设计问题的全解[J].石油地质与工程,2010,24(1):94-97. Liu Naizhen,Lu Gang,Tong Changhai.All solutions to dual arc correcting trajectory design with restricted target-entering azimuth [J].Petroleum Geology and Engineering,2010,24(1):94-97.
|
[10] |
唐雪平,苏义脑,陈祖锡.三维井眼轨道设计模型及其精确解[J].石油学报,2003,24(4):90-93. Tang Xueping,Su Yinao,Chen Zuxi.Three-dimensional well-path planning model and its exact solution [J].Acta Petrolei Sinica,2003,24(4):90-93.
|
[11] |
刘修善,石在虹.给定井眼方向的修正轨道设计方法[J].石油学报,2002,23(2):72-76. Liu Xiushan,Shi Zaihong.A new method of path-correction planning with the desired direction [J].Acta Petrolei Sinica,2002,23(2):72-76.
|
[12] |
黄根炉,赵金海,赵金洲,等.限定目标点井眼方向待钻轨道设计新方法[J].石油钻采工艺,2006,28(1):19-22. Huang Genlu,Zhao Jinhai,Zhao Jinzhou,et al.New method for hole trajectory design with a required direction at target [J].Oil Drilling Production Technology,2006,28(1):19-22.
|
[13] |
鲁港,邢玉德,佟长海.基于约束优化方法的三维多靶井眼轨迹设计模型[J].石油学报,2005,26(6):93-95. Lu Gang,Xing Yude,Tong Changhai.A model for design of three-dimensional multi-target wellbore trajectory based on restricted optimization [J].Acta Petrolei Sinica,2005,26(6):93-95.
|
[14] |
李俊峰,姜振坤,于洪波,等.考虑方位漂移时定向井待钻轨道设计方法[J].石油钻探技术,2005,33(6):6-8. Li Junfeng,Jiang Zhenkun,Yu Hongbo,et al.A method for designing well trajectory of directional wells with azimuthal drift[J].Petroleum Drilling Techniques,2005,33(6):6-8.
|
[15] |
刘修善.定向钻井轨道设计与轨迹计算的关键问题解析[J]. 石油钻探技术,2011,39(5):1-7. Liu Xiushan.Analysis of the key issues involved in well path planning and trajectory calculation for directional drilling[J].Petroleum drilling Techniques,2011,39(5):1-7.
|
[16] |
张海山,刘修善.二维绕障井实用轨道设计方法[J].石油钻探技术,2009,38(1):42-45. Zhang Haishan,Liu Xiushan.Practical two-dimensional well path design[J].Petroleum Drilling Techniques,38(1):42-45.
|
[17] |
鲁港,鲁天骐,于乐.二维绕障井轨道设计中障碍曲线的计算方法[J].石油钻探技术,2011,39(1):61-65. Lu Gang,Lu Tianqi,Yu Le.Obstacle curve calculation in 2D well traiectory design[J].Petroleum Drilling Techniques,2011,39(1):61-65.
|
[18] |
陆征一,何碧,罗勇.多项式系统的实根分离算法及其应用[M].北京:科学出版社,2004. Lu Zhengyi,He Bi,Luo Yong.The real roots separation algorithms of the polynomial system and its application [M].Beijing: Science Press,2004.
|
[19] |
鲁港,曹传文,夏泊洢.大位移井悬链线剖面设计的数值计算[J].探矿工程:岩土钻掘工程,2010,37(2):1-3,8. Lu Gang,Cao Chuanwen,Xia Boyi.Numerical calculation on design of catenary shape profile for extended reach well[J].Exploration Engineering:Rock Soil Drilling and Tunneling,2010,37(2):1-3,8.
|
[20] |
鲁港,余雷,杨文举.大位移井抛物线剖面设计的数值计算[J].石油地质与工程,2009,23(5):81-83. Lu Gang,Yu Lei,Yang Wenju.Numerical calculation of parabolic profile design of the extended reach well [J].Petroleum Geology and Engineering,2009,23(5):81-83.
|
[21] |
齐海鹰,鲁港,杨文举.大位移井侧位抛物线剖面设计的数值计算[J].中外能源,2009,14(11):55-57. Qi Haiying,Lu Gang,Yang Wenju.Numerical calculation of lateral parabolic profile design of the extended reach well[J].Sino-Global Energy,2009,14(11):55-57.
|
[22] |
卢毓周,窦同伟,鲁港.自然曲线型三维井眼轨道设计的数值算法[J].石油地质与工程,2009,23(1):101-104. Lu Yuzhou,Dou Tongwei,Lu Gang.Numerical algorithm for design of three-dimensional nature-curve-typed trajectory[J].Petroleum Geology and Engineering,2009,23(1):101-104.
|