Property Evaluation and Field Applications of a New Self-Suspending Proppant
-
摘要: 针对常规胍胶压裂液压裂时残渣对低渗油藏储层伤害大、配液流程复杂、作业强度大的问题,以覆膜石英砂为支撑剂核心、膨胀性树脂为悬浮性材料制备了自悬浮支撑剂,对其性能进行了评价,并开展了清水压裂试验。室内性能评价结果表明:自悬浮支撑剂的理化性能与陶粒、覆膜石英砂相当,导流能力与覆膜石英砂相当,可以在140 s内形成悬浮状态,在110℃下静置120 min不会分层;在540 s-1剪切速率下,剪切10 min后,稳定时间为27 min,而且破胶后胶液的黏度只有4 mPa·s。该自悬浮支撑剂在6口井的清水压裂中进行了应用,施工成功率100%,达到了国内常规冻胶压裂液加砂压裂的技术指标。研究结果表明,自悬浮支撑剂可以满足清水压裂施工的需求,能达到节省胍胶、简化配液流程、减轻储层伤害的目的,具有良好的经济效益和广阔的应用前景。Abstract: When conventional guar fracturing fluid is used for fracturing, low-permeability reservoirs are significantly damaged by its residues, the flow chart of fluid preparation is complex and the operation intensity is high. In order to solve these problems, a self-suspending proppant was prepared with coated quartz sand as the core and swelling resin as the suspending material. Later, its properties were evaluated and riverfrac tests were carried out on it. Laboratory property evaluation results demonstrated that the self-suspending proppant was equivalent to ceramic and coated quartz sand in terms of physical and chemical properties and to coated quartz sand in terms of flow conductivity. Suspension state appeared within 140 s and no stratification occurred at 110℃ after it was rested for 120 min. It was stable for 27 min after being shorn for 10 min at the shear rate of 540 s-1, and its viscosity after break was only 4 mPa·s. This self-suspending proppant was applied in 6 wells for riverfrac with success rate of 100%. Obviously, it reached the technical indictors of domestic sand fracturing with conventional gel fracturing fluid. It was shown that the self-suspending proppant could meet the operation requirements of riverfrac. Based on results, guar consumption was reduced, the flow chart of fluid preparation was simplified and reservoir damage was mitigated. Therefore, applying the new approach could result in better economic returns.
-
Keywords:
- riverfrac /
- self-suspending proppant /
- flow conductivity /
- Well Chen 101
-
-
[1] 庄照锋,赵贤,李荆,等.HPG压裂液水不溶物和残渣来源分析[J].油田化学,2009,26(2):139-141. ZHUANG Zhaofeng,ZHAO Xian,LI Jing,et al.Analysis on the origin of residue and water insoluble substances for HPG fracturing fluid[J].Oilfield Chemistry,2009,26(2):139-141. [2] 张华丽,周继东,杲春,等.胍胶压裂液伤害性研究[J].科学技术与工程,2013,13(23):6866-6871. ZHANG Huali,ZHOU Jidong,GAO Chun,et al.The damage of guar gum fracturing fluid[J].Science Technology and Engineering,2013,13(23):6866-6871. [3] BRANNON H D,RRICKARDS A R,STEPHENSON C J.Lightweight methods and compositions for well treating:6364018[P].2002-04-02.
[4] RRICKARDS A R,BRANNON H D,WOOD W D,et al.High strength,ultra-lightweight proppant lends new dimensions to hydraulic fracturing applications[R].SPE 84308,2003.
[5] WOOD W D,BRANNON H D,RICKARDS A R,et al.Ultra-lightweight proppant development yields exciting new opportunities in hydraulic fracturing design[R].SPE 84309,2003.
[6] KINCAID K P,SNIDER P M,HERRING M,et al.Self-suspending proppant[R].SPE 163818,2013.
[7] GOLDSTEIN B,VANZEELAND A.Self-suspending proppant transport technology increases stimulated reservoir volume and reduces proppant pack and formation damage[R].SPE 174867,2015.
[8] GOLDSTEIN B,JOSYULA K,VANZEELAND A,et al.Improve well performance by reducing formation damage[R].SPE 178518,2015.
[9] SY/T 6302-2009压裂支撑剂充填层短期导流能力评价推荐方法[S]. SY/T 6302-2009 Recommended practices for evaluating short term proppant pack conductivity[S]. [10] SY/T 5329-2012碎屑岩油藏注水水质推荐指标及分析方法[S]. SY/T 5329-2012 Water quality standard and practice for analysis of oilfield injecting waters in clastic reservoirs[S]. [11] 林景禹,刘洪涛,何成刚,等.河南油田老区薄层压裂技术研究[J].石油地质与工程,2007,21(1):64-65, 68. LIN Jingyu,LIU Hongtao,HE Chenggang,et al.Research on hydraulic fracturing technique of thin layer in old blocks of Henan Oilfield[J].Petroleum Geology and Engineering,2007,21(1):64-65,68. [12] FISHERM K,WARPINSKI N R.Hydraulic-fracture height growth:real date[R].SPE 145949,2011.
-
期刊类型引用(14)
1. 闫炎，韩礼红，刘永红，杨尚谕，曹婧，牟易升. 全尺寸PDC钻头旋转冲击破岩过程数值模拟. 石油机械. 2023(06): 36-42 . 
百度学术
2. 刘永旺，魏森，管志川，邹德永，梁红军，陶兴华，玄令超，张建龙. 旋转冲击钻井方法硬岩破岩钻进特性的实验研究. 实验技术与管理. 2022(05): 44-48+59 . 百度学术
3. 赵建军，赵晨熙，崔晓杰，胡群爱. 减震稳扭旋冲钻井提速工具可变节流口特性分析. 机械科学与技术. 2021(04): 592-597 . 百度学术
4. 王方祥，张乾，姜有才，郝华松，杨鑫，李道松. 连续油管长水平段防自锁技术. 油气井测试. 2021(02): 25-29 . 百度学术
5. 胡群爱，孙连忠，张进双，张俊，刘仕银. 硬地层稳压稳扭钻井提速技术. 石油钻探技术. 2019(03): 107-112 . 本站查看
6. 韩强辉，黄志龙，杨焕英，惠艳妮，樊莲莲，李丽. 水平井柱塞气举排液技术在长庆气田的应用. 石油钻采工艺. 2018(02): 210-214 . 百度学术
7. 李玮，李兵，李卓伦，闫立鹏. 脉冲式振动破岩工具设计及模拟分析. 中国煤炭地质. 2018(09): 56-61+77 . 百度学术
8. 梁志新. 螺杆驱动旋冲钻井工具的设计及试验应用. 石化技术. 2017(03): 33+46 . 百度学术
9. 许军富，赵洪山，于海叶，徐永辉，李东昊. 空气锤钻井技术在哈深201井火成岩地层的应用. 石油钻采工艺. 2017(06): 683-687 . 百度学术
10. 陈明，黄志远，马庆涛，刘云鹏，葛鹏飞，夏广强. 马深1井钻井工程设计与施工. 石油钻探技术. 2017(04): 15-20 . 本站查看
11. 闫炎，管志川，玄令超，呼怀刚，庄立. 复合冲击条件下PDC钻头破岩效率试验研究. 石油钻探技术. 2017(06): 24-30 . 本站查看
12. 徐超，郝婷婷，徐海波. 弹簧蓄能激发式旋转冲击钻井装置设计测试. 中国新技术新产品. 2017(10): 60-61 . 百度学术
13. 李玮，凌鑫，赵欢，李思琪. 石油钻井用液动破岩工具及研究进展. 能源与环保. 2017(11): 24-29 . 百度学术
14. 韩强辉. 适用于水平气井的新型自缓冲柱塞气举排液装置的设计及应用——以鄂尔多斯盆地长庆气区为例. 天然气工业. 2016(12): 67-71 . 百度学术
其他类型引用(7)
计量
- 文章访问数: 2593
- HTML全文浏览量: 89
- PDF下载量: 2532
- 被引次数: 21
下载:
