ROP Improvement Technology for High-Pressure Terrestrial Tight Abrasive Formations in the Yuanba Gas Field
-
摘要: 针对元坝气田陆相深部自流井组和须家河组地层岩性致密、硬度高、研磨性强,牙轮钻头进尺少、寿命短,以及综合效益低的问题,通过分析地层的可钻性、钻头的破岩原理,结合现场实钻情况优选高效钻头,并根据钻头与钻井工具的合理匹配原则优选合适的动力钻具,进行了"进口孕镶金刚石钻头+高速涡轮"复合钻井技术、"国产孕镶金刚石钻头+高效特殊螺杆"复合钻井技术和牙轮-PDC混合式钻头钻井技术现场试验。以钻头每单位进尺消耗的比能作为选择钻头的依据,并应用盈亏平衡理论对3种钻井技术进行了经济评价。现场试验结果表明:高压致密强研磨性地层首选"国产孕镶金刚石钻头+高效特殊螺杆"钻井技术;砾石含量高的珍珠冲组地层推荐采用"进口孕镶金刚石钻头+高速涡轮"复合钻井技术;砂泥岩互层较多的高压致密地层推荐采用牙轮-PDC混合式钻头钻井技术。经济评价结果表明,元坝气田应用"国产孕镶金刚石钻头+高效特殊螺杆"钻井技术的经济效益最高,其次是牙轮-PDC混合式钻头钻井技术,"进口孕镶金刚石钻头+高速涡轮"复合钻井技术最差。Abstract: Drilling footage and service life of cone bits were short and the comprehensive benefits were low in the Yuanba Gas Field,due to the fact that the Ziliujing and Xujiahe Formations in deep onshore regions are tight, hard and highly abrasive. Based on practical drilling situations, high-efficiency drill bits were selected through the analysis of the formations’ drillability and rock breaking principles. Appropriate dynamic drilling tools were selected according to the matching principle of drill bits and drilling tools.Then, field tests were conducted on the following three drill bits and tools combinations, including imported impregnated diamond bits and high-speed turbines, impregnated diamond bits and screws, and cones and PDC. Drill bits were selected on the basis of specific energy for unit footage consumption, and the three combinations were economically evaluated using breakeven analysis. Based on field test results, adoption was recommended for the homemade impregnated diamond bit and high-speed screw drilling for high-pressure and highly abrasive tight formations, and the impregnated diamond bit and high-speed turbo drilling for Zhenzhuchong Formation with high gravel content, and the cone and PDC drilling for high-pressure tight formations with more interbeds of sandstones and mudstones. Studies showed that the application of homemade impregnated diamond drill bit and high-speed screw drilling gave the best economic benefit contributions, followed by cone and PDC drilling followed by the imported impregnated diamond drill bit and high-speed turbo drilling.
-
-
[1] 张克勤.元坝地区钻井难题分析与技术对策探讨[J].石油钻探技术,2010,38(3):27-31. Zhang Keqin.Problems arising from drilling operations in Yuanba Area and its solutions[J].Petroleum Drilling Techniques,2010,38(3):27-31. [2] 张金成,张东清,张新军.元坝地区超深井钻井提速难点与技术对策[J].石油钻探技术,2011,39(6):6-10. Zhang Jincheng,Zhang Dongqing,Zhang Xinjun.Difficulties of improving rate of penetration and its technical solutions in Yuanba Area[J].Petroleum Drilling Techniques,2011,39(6):6-10. [3] 肖新磊.空气钻井技术在元坝地区的应用[J].石油钻探技术,2010,38(4):35-37. Xiao Xinlei.Application of air drilling technique in Yuanba Area[J].Petroleum Drilling Techniques,2010,38(4):35-37. [4] 王兴武.塔里木超深井深部井斜控制技术[J].断块油气田,2011,18(1):100-102. Wang Xingwu.Hole deviation control technology for deep interval of ultra-deep wells in Tarim Basin[J].Fault-Block Oil Gas Field,2011,18(1):100-102. [5] 罗飞,王希勇,廖忠会.涡轮钻具在川西深井段的应用分析[J].断块油气田,2008,15(6):94-96. Luo Fei,Wang Xiyong,Liao Zhonghui.Application of turbine drill in deep hole section of West Sichuan[J].Fault-Block Oil and Gas Field,2008,15(6):94-96. [6] 高航献,瞿佳,曾鹏珲.元坝地区钻井提速探索与实践[J].石油钻探技术,2010,38(4):26-29. Gao Hangxian,Qu Jia,Zeng Penghui.Research and practice to improve drilling speed in Yuanba Area[J].Petroleum Drilling Tecniques,2010,38(4):26-19. [7] 董明键.元坝124井超深井钻井提速配套技术[J].石油钻探技术,2011,39(6):23-26. Dong Mingjian.Technology to increase drilling speed used in ultradeep Well Yuanba 124[J].Petroleum Drilling Techniques,2011,39(6):23-26. [8] 闫光庆,张金成.中国石化超深井钻井技术现状与发展建议[J].石油钻探技术,2013,41(2):1-6. Yan Guangqing,Zhang Jincheng.Status and proposal of the sinopec ultra-deep drilling technology[J].Petroleum Drilling Techniques,2013,41(2):1-6. [10] 解兰宏,张金成,张东清,等.涡轮钻井技术在元坝等重点区块的应用[J].石油钻探技术,2011,39(6):15-18. Xie Lanhong,Zhang Jincheng,Zhang Dongqing,et al.The application of turbo drilling technology in Yuanba key area[J].Petroleum Drilling Techniques,2011,39(6):15-18. [11] 周延军,陈明,于承朋.元坝区块提高钻井速度技术方案探析[J].探矿工程:岩土钻掘工程,2010,37(5):1-4. Zhou Yanjun,Chen Ming,Yu Chengpeng.Discussion on drilling technology for increasing ROP in Yuanba Block[J].Exploration Engineering:Rock Soil Drilling and Tunneling,2010,37(5):1-4. [12] 董明键,肖新磊,边培明.复合钻井技术在元坝地区陆相地层中的应用[J].石油钻探技术,2010,38(4):38-40. Dong Mingjian,Xiao Xinlei,Bian Peiming.Application of compound drilling technology in terrestrial formationin Yuanba Area[J].Petroleum Drilling Techniques,2010,38(4):38-40. -
期刊类型引用(35)
1. 梁承锋,余加水,韩绪睿,刘鹏,杨学亮,汪波. 抗高温高密度盐水钻井液体系研究. 石化技术. 2025(02): 316-318 . 百度学术
2. 徐毅,何涛,王君,欧猛,严福寿,周华安,黄旭耀. 亚洲最深直井——蓬深6特超深井钻井液技术. 钻井液与完井液. 2025(02): 180-186 . 百度学术
3. 全红平,肖盛文,梁燕. 抗温耐盐钻井液降滤失剂DASAN的合成及性能研究. 现代化工. 2025(05): 151-157 . 百度学术
4. 范翔宇,蒙承,张千贵,马天寿,李柱正,王旭东,张惊喆,赵鹏斐,邓健,周桂全. 超深地层井壁失稳理论与控制技术研究进展. 天然气工业. 2024(01): 159-176 . 百度学术
5. 伊明,戴勇,杨焕强,南亚东,冀梦佳,梅云涛. 负压力窗口控压下套管井筒压力控制技术. 石油钻探技术. 2024(01): 17-25 . 本站查看
6. 邓嵘,何香江,黄安龙. PDC齿压入破岩过程的岩石裂纹特征试验研究. 石油钻探技术. 2024(01): 38-44 . 本站查看
7. 余婷,曹家俊,谢建辉,余加水. 塔里木油田富源井区深井超深井抗240℃高温钻井液体系研究. 山西化工. 2024(02): 118-119+131 . 百度学术
8. 谭宾,张斌,陶怀志. 深地勘探钻井技术现状及发展思考. 钻采工艺. 2024(02): 70-82 . 百度学术
9. 柳贡慧,查春青,陈添,汪伟. 深层超深层油气安全高效开发若干关键问题与新型解决方案. 石油钻探技术. 2024(02): 24-30 . 本站查看
10. 高德利,黄文君. 超深井工程理论与技术若干研究进展及发展建议. 石油钻探技术. 2024(02): 1-11 . 本站查看
11. 李军,杨宏伟,陈旺,龙震宇,张更. 超深井自动控制压井室内物理模拟试验及结果分析. 石油钻探技术. 2024(02): 31-37 . 本站查看
12. 王志远,梁沛智,陈科杉,仉志,张剑波,孙宝江. 深部地层智能压井多解性分析与优化策略. 石油钻探技术. 2024(02): 136-145 . 本站查看
13. 曲豪,陈锋,陈家磊,张豪,明传中,李吉荣. 特深井井下等效冲击扭矩作用下钻铤接头三维力学特征分析. 石油钻探技术. 2024(02): 211-217 . 本站查看
14. 秦赛博,易先中,蔡星星,张徐文,王利军,张玺亮. JGZ97型万米超深井钻机死绳固定器研制与安全性研究. 石油钻探技术. 2024(02): 236-242 . 本站查看
15. 花谊昌,龙远,王学迎,王越之,荣淮. 硬地层防斜打快底部钻具组合结构优化研究. 天然气与石油. 2024(03): 110-116 . 百度学术
16. 王春华,孙则鑫,丁扬扬,王立朝,许博文,张海涛,王昶皓. 塔东区块庆玉1井超深井优快钻井技术. 石油矿场机械. 2024(05): 59-65 . 百度学术
17. 周舟,李犇,耿宇迪,肖锐. 超深破碎型地层岩石力学参数的大数据预测模型. 石油钻探技术. 2024(05): 91-96 . 本站查看
18. 田晓勇,张京华,蒋海涛,蒋本强,苟旭东,古青,宋剑鸣. 尾管悬挂系统在高温、强碱、高盐环境失效分析与改进应用. 内蒙古石油化工. 2024(10): 4-7 . 百度学术
19. 田山川,甘仁忠,肖琳,丁乙,魏瑞华,陈晓文,徐永华,梁利喜. 准噶尔盆地南缘异常高压泥岩段地层压力预测方法. 特种油气藏. 2024(05): 20-30 . 百度学术
20. 柳军,简屹林,陈益丽,周鑫钟,梁爽,袁明健. 超深井射孔冲击振动模型及减振器振动抑制研究. 特种油气藏. 2024(05): 146-154 . 百度学术
21. 高崇龙,王剑,靳军,刘明,任影,刘可,王柯,邓毅. 前陆冲断带深层储集层非均质性及油气差异聚集模式——以准噶尔盆地南缘西段白垩系清水河组碎屑岩储集层为例. 石油勘探与开发. 2023(02): 322-332 . 百度学术
22. 李涛,苏强,杨哲,徐卫强,胡锡辉. 川西地区超深井钻井完井技术现状及攻关方向. 石油钻探技术. 2023(02): 7-15 . 本站查看
23. GAO Chonglong,WANG Jian,JIN Jun,LIU Ming,REN Ying,LIU Ke,WANG Ke,DENG Yi. Heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in foreland thrust belts: A case study of deep Cretaceous Qingshuihe Formation clastic reservoirs in southern Junggar Basin, NW China. Petroleum Exploration and Development. 2023(02): 360-372 . 必应学术
24. 吴泽兵,袁若飞,张文溪,黄俊杰. 智能仿生PDC钻头的破岩数值模拟. 科学技术与工程. 2023(16): 6870-6880 . 百度学术
25. 廖星奥,李军,杨宏伟,柳贡慧,刘伟,李牧,廖茂林. 井筒温压场下微型测量器运移模型及校正研究. 石油机械. 2023(06): 27-35 . 百度学术
26. 孙欢,王运功,倪华峰. 多形变堵漏工作液的研发与应用. 石油化工应用. 2023(05): 79-82 . 百度学术
27. 徐鲲,陶林,李文龙,李林波,汤柏松,邸毅峰,王旭. 渤海油田变质岩潜山油藏钻井关键技术. 石油钻探技术. 2023(03): 16-21 . 本站查看
28. 马英文,杨进,李文龙,徐鲲,谢涛,杨保健. 渤中26-6油田发现井钻井设计与施工. 石油钻探技术. 2023(03): 9-15 . 本站查看
29. 罗春芝,向欢,章楚君,王怡迪,刘冲. 抗温抗盐乳液聚合物降滤失剂的合成与评价. 长江大学学报(自然科学版). 2023(06): 93-102 . 百度学术
30. 陈国军,张啸,高明,张帆,张进,范小秦. 超深油气井核磁共振测井影响分析及谱形态校正. 测井技术. 2023(04): 457-461 . 百度学术
31. 许春阳,陈永平,张继生. 课程思政融入实践教学的路径探索——以“海洋资源与工程导论”课程为例. 教育教学论坛. 2023(47): 185-188 . 百度学术
32. 陈超峰,刘新宇,李雪彬,陈雪茹,相志鹏,丁乙. 准噶尔盆地呼探1井高温高压超深井试油测试技术. 石油钻采工艺. 2023(04): 447-454 . 百度学术
33. 杨鹏程,薛浩楠,李升,陈科杉. 超深层高压油气藏天然气偏差系数计算新模型. 石油钻探技术. 2023(06): 106-114 . 本站查看
34. 邢林庄,袁玥辉,叶成,屈沅治,孙晓瑞,高世峰,任晗. 抗高温抗复合盐支链型聚合物降滤失剂的合成及其性能. 钻井液与完井液. 2023(06): 703-710 . 百度学术
35. 刘景丽,刘平江,任强,刘岩,彭松,曹洪昌,张文阳,程小伟. 适用于万米深井的大温差水泥浆. 钻井液与完井液. 2023(06): 778-786 . 百度学术
其他类型引用(6)
计量
- 文章访问数: 3514
- HTML全文浏览量: 125
- PDF下载量: 3322
- 被引次数: 41