Citation: | Chu Daoyu. Well Control Technology in Deepwater Well[J]. Petroleum Drilling Techniques, 2012, 40(1): 52-57. DOI: 10.3969/j.issn.1001-0890.2012.01.011 |
[1] |
Rohleder S A,Sanders W W,Williamson R N,et al.Challenges of drilling an ultra-deep well in deepwater-spa prospect.SPE/IADC 79810,2003.
|
[2] |
Robert D Grace.井喷与井控手册 [M].高振果,译.北京:石油工业出版社,2006:1-3.Robert D Grace.Blowout and well control handbook[M].Translater:Gao Zhenguo.Beijing:Petroleum Industry Press,2006:1-3.
|
[3] |
高永海,孙宝江,王志远.深水井涌压井方法及其适应性分析[J].石油钻探技术,2011,39(2):45-49.Gao Yonghai,Sun Baojiang,Wang Zhiyuan.Well killing methods for deepwater well and adaptability analysis[J].Petroleum Drilling Techniques,2011,39(2):45-49.
|
[4] |
杨进,曹式敬.深水石油钻井技术现状及发展趋势[J].石油钻采工艺,2008,30(2):10-13.Yang Jin,Cao Shijing.Current situation and developing trend of petroleum drilling technologies in deep water [J].Oil Drilling Production Technology,2008,30(2):10-13.
|
[5] |
王言峰.深水钻井问题综述[J].吐哈油气,2009,14(2):169-170. Wang Yanfeng.Overview of deepwater drilling challenge [J].Tuha Oil & Gas,2009,14(2):169-170.
|
[6] |
王志远,孙宝江,程海清,等.深水钻井井筒中天然气水合物生成区域预测[J].石油勘探与开发,2008,35(6):731-735.Wang Zhiyuan,Sun Baojiang,Cheng Haiqing,et al.Prediction of gas hydrate formation region in the wellbore of deepwater drilling[J].Petroleum Exploration and Development,2008,35(6):731-735.
|
[7] |
Guesnon J,Gaillard C,Richard F.Ultra-deep water drilling riser design and relative technology[J].Oil Gas Science and Technology-Rev IFP,2002,57(1):39-57.
|
[8] |
卓鲁斌,葛云华,汪海阁.深水钻井早期井涌检测方法及其未来趋势[J].石油钻采工艺,2009,31(1):22-26.Zhuo Lubin,Ge Yunhua,Wang Haige.Early kick detection methods for deepwater drilling and its future development[J].Oil Drilling Production Technology,2009,31(1):22-26.
|
[9] |
胡海良,唐海雄,汪顺文,等.白云6-1井深水钻井技术[J].石油钻采工艺,2008,30(6):25-28.Hu Hailiang,Tang Haixiong,Wang Shunwen,et al.Deepwater drilling techniques in Baiyun 6-1 Well[J].Oil Drilling Production Technology,2008,30(6):25-28.
|
[10] |
IADC.Deepwater well control guidelines[M].Houston:International Association of Drilling Contractors,2002:29-33.
|
[11] |
张曙辉,刘瑞文,王介玉,等.深水井控中节流管线摩阻分析及压井方法[J].石油钻探技术,2006,34(5):28-29.Zhang Shuhui,Liu Ruiwen,Wang Jieyu,et al.A method of killing well and analysis on choke line friction losses for deepwater well control [J].Petroleum Drilling Techniques,2006,34(5):28-29.
|
[12] |
王志远,孙宝江.深水司钻压井法安全压力余量及循环流量计算[J].中国石油大学学报:自然科学版,2008,32(3):71-74,83.Wang Zhiyuan,Sun Baojiang.Calculation of safety pressure margins and circulation rate of well killing by deep water driller’s method[J].Journal of China University of Petroleum:Edition of Natural Science,2008,32(3):71-74,83.
|
[13] |
白小东,黄进军,侯勤立.深水钻井液中天然气水合物的成因分析及防治措施[J].精细石油化工进展,2004,5(4):52-58.Bai Xiaodong,Huang Jinjun,Hou Qinli.Contributing factors and preventing measure of hydrate in deep water drilling mud [J].Advances in Fine Petrochemicals,2004,5(4):52-58.
|
[14] |
白玉湖,李清平,周建良,等.天然气水合物对深水钻采的潜在风险及对应性措施[J].石油钻探技术,2009,37(3):17-21.Bai Yuhu,Li Qingping,Zhou Jianliang,et al.The potential risk of gas hydrate to deepwater drilling and production and the corresponding strategy[J].Petroleum Drilling Techniques,2009,37(3):17-21.
|