Wu Lixin, Chen Ping, Zhu Xiaohua, Zhang Wenhua, Jia Yanjie, Li Jinhe. Contrast of Fatigue Failure Cycles of Drill String during Gas Drilling[J]. Petroleum Drilling Techniques, 2012, 40(1): 42-46. DOI: 10.3969/j.issn.1001-0890.2012.01.009
Citation: Wu Lixin, Chen Ping, Zhu Xiaohua, Zhang Wenhua, Jia Yanjie, Li Jinhe. Contrast of Fatigue Failure Cycles of Drill String during Gas Drilling[J]. Petroleum Drilling Techniques, 2012, 40(1): 42-46. DOI: 10.3969/j.issn.1001-0890.2012.01.009

Contrast of Fatigue Failure Cycles of Drill String during Gas Drilling

More Information
  • Received Date: July 17, 2011
  • Revised Date: December 07, 2011
  • The development of gas drilling is restricted seriously because of frequent failure of drilling tools.To study the fatigue failure cycle of drill string,the whole drill string was taken in deep-vertical drilling as research subject.Based on Forman model in drill string fatigue life prediction,and taking consideration of the dynamic characteristics of drill string and the effect of local thermal factors on drill string fatigue life in gas drilling,the calculation equation of drill string fatigue life in gas drilling was established.Taking a real borehole in the west of Sichuan province as an example,the fatigue life of drill string in gas drilling was calculated with the established equation,then compared with that in mud drilling.Consequently,the relationship model of the fatigue life in gas and mud drilling was obtained.The results showed that the fatigue life of drilling tools was very sensitive to the initial crack.The initial crack develops larger,the fatigue life drops sharper.The fatigue life of drill string in each interval in gas drilling was obviously lower than that in mud drilling.
  • [1]
    Baryshnikov A,Calderoni A,Ligrone A,et al.A new approach to the analysis of drillstring fatigue behavior[J].SPE Drilling Completion,1997,12(2):77-84.
    [2]
    邹海洋,狄勤丰,姚建林,等.气体钻井钻柱失效机理分析[J].石油钻探技术,2008,36(3):55-58. Zou Haiyang,Di Qinfeng,Yao Jianlin,et al.Drill-string failure mechanism in gas drilling[J].Petroleum Drilling Techniques,2008,36(3):55-58.
    [3]
    李鹤林,冯耀荣.石油管材与装备失效分析案例集[M].北京:石油工业出版社,2006:63-75. Li Helin,Feng Yaorong.The cases collection of petroleum tubular goods and equipment failure analysis [M].Beijing:Petroleum Industry Press,2006:63-75.
    [4]
    Burgess T M,McDaniel G L,Das P K.Improving BHA tool reliability with drillstring vibration models:field experience and imitations.SPE/IADC 16109,1987.
    [5]
    Li Zifeng,Guo Boyun.Analysis of longitudinal vibration of drill string in air and gas drilling.SPE 107697,2007.
    [6]
    Howard J A,Halbert M E,Lubinski A.Systematic tracking of fatigue and crack growth to optimize drillstring reliability.SPE/IADC 25775,1993.
    [7]
    Bailey E I,Smith J E.The goodman diagram as an analytical tool to optimize fatigue life of rotary shouldered connections.SPE 79874,2003.
    [8]
    Hossain M M,Rahman M K,Rahman S S,et al.Fatigue life evaluation:a key to avoid drillpipe failure due to die-marks.IADC/SPE 47789,1998.
    [9]
    Hill T H,Ellis S E,Lee K,et al.An innovative design approach to reduce drillstring fatigue[J].SPE Drilling Completion,2005,20(2):94-100.
    [10]
    Wu Jiang.Drill-pipe bending and fatigue in rotary drilling of horizontal wells.SPE 37353,1996.
    [11]
    李文飞,管志川,赵洪山,等.钻柱疲劳累积损伤的计算方法[J].中国石油大学学报:自然科学版,2008,32(3):60-62,67. Li Wenfei,Guan Zhichuan,Zhao Hongshan,et al.Calculation method of fatigue accumulative damage of drill string[J].Journal of China University of Petroleum:Edition of Natural Science,2008,32(3):60-62,67.
    [12]
    林元华,邹波,付建红,等.考虑运动状态时全井段钻柱疲劳裂 纹扩展寿命计算研究[J].机械科学与技术,2005,24(4):404-407. Lin Yuanhua,Zou Bo,Fu Jianhong,et al.Research on how to predict the drillstring fatigue life of whole well with precession and backward precession[J].Mechanical Science and Technology,2005,24(4):404-407.
    [13]
    徐灏.新编机械设计手册:下[M].北京:机械工业出版社,1995:206-213. Xu Hao.New machine design handbook:part Ⅱ[M].Beijing:China Machine Press,1995:206-213.
    [14]
    Dale B A.An experimental investigation of fatigue-crack growth in drillstring tubulars[J].SPE Drilling Engineering,1988,3(4):356-362.
    [15]
    易当祥,刘春和,封艳文,等.扭力轴三维裂纹扩展寿命仿真研究[J].应用力学学报,2008,25(3):411-414. Yi Dangxiang,Liu Chunhe,Feng Yanwen,et al.Simulation to three-dimensional fatigue crack growth life of torsion bar in self-propelled gun[J].Chinese Journal of Applied Mechanics,2008,25(3):411-414.
    [16]
    韩春杰,阎铁,毕雪亮,等.钻柱横向振动规律及应用[J].大庆石油学院学报,2004,28(1):14-16. Han Chunjie,Yan Tie,Bi Xueliang,et al.Rules and their application of drilling string lateral vibration [J].Journal of Daqing Petroleum Institute,2004,28(1):14-16.
    [17]
    张小柯,狄勤丰.钻柱涡动时弯扭组合交变应力下的强度计算[J].天然气工业,2004,24(7):49-51. Zhang Xiaoke,Di Qinfeng.Strength calculation of the whirled drillstring at flexural-torsional alternate stress[J].Natural Gas Industry,2004,24(7):49-51.
    [18]
    Hehn L,Jellison M,Wyble K,et al.Catastrophic drill string failures caused by downhole friction heating:an increasing trend.SPE/IADC 105026,2007.
  • Related Articles

    [1]WANG Wenchang, XU Zukai, ZHOU Xing, WANG Zhaobin, CHEN Feng. Dynamic Fatigue Failure Characteristics and Parameter Optimization ofDrill Strings in Ultra-Deep Wells[J]. Petroleum Drilling Techniques, 2024, 52(2): 118-125. DOI: 10.11911/syztjs.2024033
    [2]DING Shidong, LU Peiqing, GUO Yintong, LI Zaoyuan, LU Yunhu, ZHOU Shiming. Progress and Prospect on the Study of Full Life Cycle Sealing Integrity of Cement Sheath in Complex Environments[J]. Petroleum Drilling Techniques, 2023, 51(4): 104-113. DOI: 10.11911/syztjs.2023076
    [3]WANG Kelin, LIU Hongtao, HE Wen, HE Xinxing, GAO Wenxiang, SHAN Feng. Failure Control of Completion Packer in the High Temperature and High Pressure Gas Well of Kuqa Piedmont Structure[J]. Petroleum Drilling Techniques, 2021, 49(2): 61-66. DOI: 10.11911/syztjs.2020128
    [4]ZHAO Hongbo, JI Wei, WANG Chong, LI Xingbao, CHEN Guofei. A Geo-Steering Technique Using Marker and Sedimentary Cycles in Horizontal Well Drilling in the Yulin Gas Field[J]. Petroleum Drilling Techniques, 2018, 46(6): 39-46. DOI: 10.11911/syztjs.2018113
    [5]Jin Yequan, Hu Man, Wu Qian, Ji Yongqiang. Analysis of Deepwater BOP Failure in the Macondo Well Accident[J]. Petroleum Drilling Techniques, 2014, 42(4): 53-58. DOI: 10.3969/j.issn.1001-0890.2014.04.010
    [6]Wang Jinbo, Wang Zhiyuan, Zhang Weiguo, Xie Hua, Sun Baojiang. Well Control Safety Operation Cycle during Typhoon at Deep Waters of South China Sea[J]. Petroleum Drilling Techniques, 2013, 41(3): 51-55. DOI: 10.3969/j.issn.1001-0890.2013.03.010
    [7]Yan Rentian, Wang Feng, Zhang Deping, Zhu Hongjun, Zeng Dezhi. Failure Analysis of API Tubing Round Threaded Connection Induced by Flow Field[J]. Petroleum Drilling Techniques, 2012, 40(5): 111-114. DOI: 10.3969/j.issn.1001-0890.2012.05.024
    [8]Lan Zhigang. Failure Mechanism of Two-Way Hydraulic Shock Absorbers and Improvement Measures[J]. Petroleum Drilling Techniques, 2012, 40(2): 104-108. DOI: 10.3969/j.issn.1001-0890.2012.02.020
    [9]Study on Mechanism of Cake Shear Failure in Hydraulic Vibration Cementing[J]. Petroleum Drilling Techniques, 2011, 39(4): 53-56. DOI: 10.3969/j.issn.1001-0890.2011.04.011
    [10]Wellbore Wall Stress Analysis around Failure Casing in Consideration of Fluid Seepage[J]. Petroleum Drilling Techniques, 2011, 39(1): 40-43. DOI: 10.3969/j.issn.1001-0890.2011.01.009

Catalog

    Article Metrics

    Article views (2902) PDF downloads (3303) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return