| Citation: |
WU Zebing, YUAN Ruofei, ZHANG Wenxi, et al. Optimization design of interface structure for PDC composite sheets based on multi-objective genetic algorithms [J]. Petroleum Drilling Techniques, 2024, 52(4)：24-33. DOI: 10.11911/syztjs.2024068
|
A novel interface structure was proposed to enhance the bonding strength at the interface of polycrystalline diamond (PDC) composite sheets, thereby improving their overall impact resistance and stability. The finite element method was employed to compare the stress distribution within composite sheets designed with the proposed interface structure against those with a conventional interface structure under external stress conditions. The study accounted for the influence of the structural parameters of the proposed interface structure, employing an optimal filling space method for sampling. The least square method was used to develop a second-order response surface approximation model of the structural field. Using the interface structure parameters as design variables, the maximum values of equivalent stress, maximum shear stress, and maximum principal stress in the structural field were set as design objectives, and a multi-objective genetic algorithm was then applied to optimize the response surface appro-ximation model. The results demonstrate that, under identical simulation conditions, the proposed interface structure reduces the maximum equivalent stress by 50.7%, the maximum shear stress by 52%, and the maximum principal stress by 22.4% compared to the conventional interface structure. For the optimized PDC composite sheet under the same conditions, equivalent stress, maximum shear stress, and maximum principal stress are all reduced by more than 14%. The optimized PDC composite sheet exhibited improved rock-breaking stability, effectively avoid stress concentration, and enhance thermal stability. The findings provide a theoretical basis for the optimization design of PDC composite sheets and introduce a novel optimization method that can help reduce research and development costs.
| [1] |
高德利,黄文君. 超深井工程理论与技术若干研究进展及发展建议[J]. 石油钻探技术,2024,52(2):1–11. doi: 10.11911/syztjs.2024024
GAO Deli, HUANG Wenjun. Research and development suggestions on theory and techniques in ultra-deep well engineering[J]. Petroleum Drilling Techniques, 2024, 52(2): 1–11. doi: 10.11911/syztjs.2024024
|
| [2] |
高德利,黄文君. 深层、超深层定向钻井中若干基础研究进展与展望[J]. 天然气工业,2024,44(1):1–12.
GAO Deli, HUANG Wenjun. Basic research progress and prospect in deep and ultra-deep directional drilling[J]. Natural Gas Industry, 2024, 44(1): 1–12.
|
| [3] |
王勇,汤勇,李士伦,等. 多级压裂水平井周期性注气吞吐提高页岩油气藏采收率:以北美Eagle Ford非常规油气藏为例[J]. 天然气工业,2023,43(1):153–161.
WANG Yong, TANG Yong, LI Shilun, et al. Cyclic gas injection huff-n-puff in multi-stage fracturing horizontal wells to improve recovery of shale oil and gas reservoirs: taking Eagle Ford shale in North America as an example[J]. Natural Gas Industry, 2023, 43(1): 153–161.
|
| [4] |
高德利. 非常规油气井工程技术若干研究进展[J]. 天然气工业,2021,41(8):153–162. doi: 10.3787/j.issn.1000-0976.2021.08.014
GAO Deli. Some research advances in well engineering technology for unconventional hydrocarbon[J]. Natural Gas Industry, 2021, 41(8): 153–162. doi: 10.3787/j.issn.1000-0976.2021.08.014
|
| [5] |
吴泽兵,袁若飞,张文溪,等. PDC混合布齿钻头破碎非均质花岗岩数值模拟[J]. 天然气工业,2024,44(5):105–117.
WU Zebing, YUAN Ruofei, ZHANG Wenxi, et al. Numerical simulation of breaking heterogeneous granite with PDC mixed-tooth bits[J]. Natural Gas Industry, 2024, 44(5): 105–117.
|
| [6] |
刘伟吉,王燕飞,祝效华,等. 基于等效岩体表征方法的花岗岩切削破碎机理[J]. 应用基础与工程科学学报,2023,31(4):1043–1060.
LIU Weiji, WANG Yanfei, ZHU Xiaohua, et al. Rock cutting mechanism of heterogeneous granite using equivalent rock mass technology[J]. Journal of Basic Science and Engineering, 2023, 31(4): 1043–1060.
|
| [7] |
WEI Jiusen, LIU Wei, GAO Deli. Effect of cutter shape on the resistance of PDC cutters against tip impacts[J]. SPE Journal, 2022, 27(5): 3035–3050. doi: 10.2118/209809-PA
|
| [8] |
刘永升. 仿生PDC切削齿结构设计与破岩机理研究[D]. 成都:西南石油大学,2015.
LIU Yongsheng. Study on bionic PDC cutter structure design and rock breaking mechanism [D]. Chengdu: Southwest Petroleum University, 2015.
|
| [9] |
LIU Weiji, MENG Xun, WENG Xiaosong, et al. Rock-breaking performance of specially-shaped PDC cutters from a new insight into the damage beneath cutting groove[J]. Geoenergy Science and Engineering, 2023, 231(part A): 212326.
|
| [10] |
李琴,傅文韬,黄志强,等. 硬地层中新型PDC齿破岩机理及试验研究[J]. 工程设计学报,2019,26(6):635–644. doi: 10.3785/j.issn.1006-754X.2019.00.015
LI Qin, FU Wentao, HUANG Zhiqiang, et al. Rock breaking mechanism and experimental study of new PDC tooth in hard formation[J]. Chinese Journal of Engineering Design, 2019, 26(6): 635–644. doi: 10.3785/j.issn.1006-754X.2019.00.015
|
| [11] |
孙荣军,谷拴成,石智军,等. 硬岩钻进用仿生PDC切削齿优化与破岩机理研究[J]. 煤炭科学技术,2018,46(5):143–148.
SUN Rongjun, GU Shuancheng, SHI Zhijun, et al. Study on optimized bionic PDC cutter applied to hard rock drilling and rock cutting mechanism[J]. Coal Science and Technology, 2018, 46(5): 143–148.
|
| [12] |
刘维,高德利. PDC钻头研究现状与发展趋势[J]. 前瞻科技,2023,2(2):168–178.
LIU Wei, GAO Deli. Research status and development trends of polycrystalline diamond compact Bits[J]. Science and Technology Foresight, 2023, 2(2): 168–178.
|
| [13] |
LIU Wei, GAO Deli. Microstructure and wear of Ni-WC hardfacing used for steel-body PDC bits[J]. International Journal of Refractory Metals and Hard Materials, 2021, 101: 105683. doi: 10.1016/j.ijrmhm.2021.105683
|
| [14] |
吴泽兵,席凯凯,赵海超,等. 仿生PDC齿旋转破岩时的温度场和破岩特性模拟研究[J]. 石油钻探技术,2022,50(2):71–77. doi: 10.11911/syztjs.2021114
WU Zebing, XI Kaikai, ZHAO Haichao, et al. Simulation study on temperature field and rock breaking characteristics of the bionic PDC cutter in rotating state[J]. Petroleum Drilling Techniques, 2022, 50(2): 71–77. doi: 10.11911/syztjs.2021114
|
| [15] |
呼怀刚,黄洪春,汪海阁,等. 国内外PDC钻头新进展与发展趋势展望[J]. 石油机械,2024,52(2):1–10.
HU Huaigang, HUANG Hongchun, WANG Haige, et al. New progress and development trends of PDC bits in China and abroad[J]. China Petroleum Machinery, 2024, 52(2): 1–10.
|
| [16] |
刘畅,杨迎新,姚建林,等. 新型非平面齿破岩规律研究[J]. 地下空间与工程学报,2023,19(2):428–436.
LIU Chang, YANG Yingxin, YAO Jianlin, et al. Research on rock breaking law of new non planar cutter[J]. Chinese Journal of Underground Space and Engineering, 2023, 19(2): 428–436.
|
| [17] |
PENG Qi, ZHOU Yingcao, YU Jiaqing, et al. Study on rock breaking efficiency of special shaped cutters[J]. IOP Conference Series: Earth and Environmental Science, 2022, 983(1): 012089. doi: 10.1088/1755-1315/983/1/012089
|
| [18] |
ZHENG Deyu, XIA Yufeng, TENG Haihao, et al. Application of genetic algorithm to enhance the predictive stability of BP-ANN constitutive model for GH4169 superalloy[J]. Journal of Central South University, 2024, 31(3): 693–708. doi: 10.1007/s11771-024-5591-x
|
| [19] |
SHAO Fangyuan, LIU Wei, GAO Deli, et al. Development and verification of triple-ridge-shaped cutter for PDC bits[J]. SPE Journal, 2022, 27(6): 3849–3863. doi: 10.2118/210580-PA
|
| [20] |
袁若飞,吴泽兵,张文溪. 可伸缩仿生聚晶金刚石复合片钻头[J]. 石油钻采工艺,2023,45(3):296–306.
YUAN Ruofei, WU Zebing, ZHANG Wenxi. Scalable biomimetic polycrystalline diamond compact bit[J]. Oil Drilling & Production Technology, 2023, 45(3): 296–306.
|
| [21] |
张德荣,孔春岩,常十梨,等. 异形PDC加强齿结构优化设计及有限元分析[J]. 机械设计与研究,2014,30(5):80–83.
ZHANG Derong, KONG Chunyan, CHANG Shili, et al. The structure design of special-shaped PDC reinforced-cutter and its finite element method analysis[J]. Machine Design & Research, 2014, 30(5): 80–83.
|
| [22] |
刘永旺,李坤,管志川,等. 降低井底岩石抗钻能力的钻速提高方法研究及钻头设计[J]. 石油钻探技术,2024,52(3):11–20. doi: 10.11911/syztjs.2024003
LIU Yongwang, LI Kun, GUAN Zhichuan, et al. Research on the method of improving ROP and designing drill bits to mitigate drillability of bottomhole rocks[J]. Petroleum Drilling Techniques, 2024, 52(3): 11–20. doi: 10.11911/syztjs.2024003
|
| [23] |
WEI Jiusen, LIU Wei, GAO Deli. Modeling of PDC bit-rock interaction behaviors based on the analysis of dynamic rock-cutting process[J]. Geoenergy Science and Engineering, 2024, 239: 212955. doi: 10.1016/j.geoen.2024.212955
|
| [24] |
XIONG Chao, HUANG Zhongwei, SHI Huaizhong, et al. Investigations on the stinger PDC cutter breaking granitoid under in-situ stress and hydrostatic pressure conditions[J]. International Journal of Rock Mechanics and Mining Sciences, 2023, 164: 105312. doi: 10.1016/j.ijrmms.2022.105312
|
| [25] |
高德利,刘维,万绪新,等. PDC钻头钻井提速关键影响因素研究[J]. 石油钻探技术,2023,51(4):20–34. doi: 10.11911/syztjs.2023022
GAO Deli, LIU Wei, WAN Xuxin, et al. Study on key factors influencing the ROP improvement of PDC bits[J]. Petroleum Drilling Techniques, 2023, 51(4): 20–34. doi: 10.11911/syztjs.2023022
|
| [26] |
吴泽兵,谷亚冰,姜雯,等. 基于遗传优化算法的井底钻压智能预测模型[J]. 石油钻采工艺,2023,45(2):151–159.
WU Zebing, GU Yabing, JIANG Wen, et al. Intelligent prediction models of downhole weight on bit based on genetic optimization algorithm[J]. Oil Drilling & Production Technology, 2023, 45(2): 151–159.
|
| [27] |
王娟,梅启亮,邹永玲,等. 基于多参数时间序列及粒子群优化算法的油藏产量动态建模预测方法[J]. 石油钻采工艺,2023,45(2):190–196.
WANG Juan, MEI Qiliang, ZOU Yongling, et al. Reservoir production performance prediction model based on multi-parameter time series and particle swarm optimization algorithm[J]. Oil Drilling & Production Technology, 2023, 45(2): 190–196.
|
| [28] |
康正明,秦浩杰,张意,等. 基于LSTM神经网络的随钻方位电磁波测井数据反演[J]. 石油钻探技术,2023,51(2):116–124. doi: 10.11911/syztjs.2023047
KANG Zhengming, QIN Haojie, ZHANG Yi, et al. Data inversion of azimuthal electromagnetic wave logging while drilling based on LSTM neural network[J]. Petroleum Drilling Techniques, 2023, 51(2): 116–124. doi: 10.11911/syztjs.2023047
|
| [29] |
樊永东,庞惠文,金衍,等. 基于成像测井的孔缝智能分割与识别[J]. 石油钻采工艺,2022,44(4):500–505.
FAN Yongdong, PANG Huiwen, JIN Yan, et al. Intelligent segmentation and recognition of pores and fractures based on imaging logging[J]. Oil Drilling & Production Technology, 2022, 44(4): 500–505.
|
| [30] |
ZHANG Zengzeng, ZHAO Dajun, ZHAO Yan, et al. 3D numerical simulation study of rock breaking of the wavy PDC cutter and field verification[J]. Journal of Petroleum Science and Engineering, 2021, 203: 108578. doi: 10.1016/j.petrol.2021.108578
|
| [31] |
吴泽兵,袁若飞,张文溪,等. 锯形PDC齿破岩与温度特性数值模拟研究[J]. 石油机械,2024,52(1):29–37.
WU Zebing, YUAN Ruofei, ZHANG Wenxi, et al. Numerical simulation on rock-breaking and temperature characteristics of sawtooth PDC cutter[J]. China Petroleum Machinery, 2024, 52(1): 29–37.
|
| [32] |
XI Yan, WANG Wei, FAN Lifeng, et al. Experimental and numerical investigations on rock-breaking mechanism of rotary percussion drilling with a single PDC cutter[J]. Journal of Petroleum Science and Engineering, 2022, 208(Part B): 109227.
|
| [33] |
WANG Yong, NI Hongjian, WANG Ruihe, et al. Numerical simulation research on cutting rock with a PDC cutter assisted by an impact force[J]. Advances in Civil Engineering, 2022(1): 1.1–1.9.
|
| [34] |
刘维,高德利. 大齿快切PDC钻头提速研究与现场试验[J]. 天然气工业,2022,42(9):102–110.
LIU Wei, GAO Deli. Research and field test of large-tooth and rapid-cutting PDC bit for ROP enhancement[J]. Natural Gas Industry, 2022, 42(9): 102–110.
|
| [35] |
杨迎新, 牛世伟, 陈炼, 等. 具有独立缓冲结构的PDC—牙轮复合钻头研制[J]. 天然气工业,2024,44(5):96–104.
YANG Yingxin, NIU Shiwei, CHEN Lian, et al. A PDC-roller hybrid bit with an independent buffer structure[J]. Natural Gas Industry, 2024, 44(5): 96–104.
|
| [36] |
祝效华,王燕飞,刘伟吉,等. PDC单齿切削破碎非均质花岗岩性能的评价新方法[J]. 天然气工业,2023,43(4):137–147.
ZHU Xiaohua, WANG Yanfei, LIU Weiji, et al. A new method for evaluating the rock cutting and breaking performance of PDC cutters in heterogeneous granites[J]. Natural Gas Industry, 2023, 43(4): 137–147.
|
| [1] | XU Fuqiang, XUE Yafei, SONG Xianzhi, XIONG Bo, MO Shaoyuan. Heat Extraction Evaluation and Well Pattern Comparison of Abandoned OilWells Converted into Geothermal Wells[J]. Petroleum Drilling Techniques, 2024, 52(6): 156-166. DOI: 10.11911/syztjs.2024021 |
| [2] | LAN Kunxiang, ZHANG Xingguo, AI Zhengqing, YUAN Zhongtao, XU Liqun, LIU Zhongfei. Research on the Rheological Properties of Drilling Fluids in Annular Spacefor Cementing at Low Shear Rates in Kuqa Piedmont[J]. Petroleum Drilling Techniques, 2021, 49(6): 55-61. DOI: 10.11911/syztjs.2021058 |
| [3] | YAO Xiaojiang, LU Huatao, SHANG Jie, WANG Qinghua, LI Yang. Optimization Design and Numerical Analysis of Flow Passage Converters in LWD Tools[J]. Petroleum Drilling Techniques, 2021, 49(5): 121-126. DOI: 10.11911/syztjs.2021069 |
| [4] | WANG Weitao. Design and Test of a New PDC Bit with Tapered Auxiliary Cutter for Heterogeneous Formations[J]. Petroleum Drilling Techniques, 2018, 46(2): 58-62. DOI: 10.11911/syztjs.2018046 |
| [5] | ZHU Zuyang, WU Haiyan, ZHANG Lin, LI Fengbo, ZHAO Jinhai, ZHANG Wei. Microchip Tracer Power Supply Technology and Downhole Testing[J]. Petroleum Drilling Techniques, 2018, 46(1): 122-127. DOI: 10.11911/syztjs.2018012 |
| [6] | SUN Haoyu, BO Peng, LI Zuohui, HUA Chenquan, ZHU Lietao, MA Jianpeng. Development and Function Test of an Intelligent Split-Control Switch for Separate-Layer Oil Production[J]. Petroleum Drilling Techniques, 2017, 45(4): 87-92. DOI: 10.11911/syztjs.201704015 |
| [7] | Chen Jiangye, Wang Yiliang, Hou Qingchun, Yang Song. Acoustically-Controlled Oil Well Pressure Switch Development and Testing[J]. Petroleum Drilling Techniques, 2015, 43(4): 133-137. DOI: 10.11911/syztjs.201504024 |
| [8] | Peng Mingwang, Bai Binzhen, Wang Ke, Li Shaoan, Li Fei. Test of Constant Torque Converter while Drilling in Well TH121125[J]. Petroleum Drilling Techniques, 2014, 42(6): 120-123. DOI: 10.11911/syztjs.201406024 |
| [9] | Kuang Yuchun, Chen Yuzhong, Tu Junwen, Zhang Zhi. Simulation of Cutting Parameters of PDC Bit Based on UG/OPEN[J]. Petroleum Drilling Techniques, 2014, 42(4): 111-115. DOI: 10.3969/j.issn.1001-0890.2014.04.021 |
| 1. |
田小超，蒋必辞. 随钻伽马测井探管节电降功耗控制方法与系统设计. 煤矿安全. 2022(01): 161-166 .
| |
| 2. |
吴川，杨朔，樊辰星，周清，文国军，刘彬. 具有井下自发电及自传感功能的随钻测量新方法研究——以用于振动测量的井下摩擦纳米发电机为例. 钻探工程. 2021(04): 47-53 .
| |
| 3. |
邓雷，郭兆明. 煤矿主要通风机配电系统双电源切换装置应用研究. 能源与环保. 2021(10): 264-269 .
| |
| 4. |
李波. 喇嘛甸油田聚合物驱油地面配送井下注调技术. 化学工程与装备. 2021(10): 107-109 .
|
Supervisor：SINOPEC GROUP
Sponsor：Sinopec Research Institute of Petroleum Engineering
Serial Number：CN 11-1763/TE, ISSN 1001-0890
Chief Editor： WANG Minsheng
Supported by: Beijing Renhe Information Technology Co., Ltd. 
Service Account
Subscription Account
Video Channel
QR Code on Taobao
Wechat QR Code
Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.
DownLoad: