ZHANG Jinshuang, ZHANG Zengbao, WANG Xuecai. The Design of Blade Type Diamond-Impregnated Bit and It’s Application in Well Hashan 101[J]. Petroleum Drilling Techniques, 2019, 47(5): 57-61. DOI: 10.11911/syztjs.2019083
Citation: ZHANG Jinshuang, ZHANG Zengbao, WANG Xuecai. The Design of Blade Type Diamond-Impregnated Bit and It’s Application in Well Hashan 101[J]. Petroleum Drilling Techniques, 2019, 47(5): 57-61. DOI: 10.11911/syztjs.2019083

The Design of Blade Type Diamond-Impregnated Bit and It’s Application in Well Hashan 101

More Information
  • Received Date: October 22, 2018
  • Revised Date: June 20, 2019
  • Available Online: July 26, 2019
  • In order to improve the ROP in the volcanic rock formation of the Hashan Area in Junggar Basin, increase the footage of single drill bit, and reduce the risks of wellbore instability and caving, the bit design for rapid drilling was carried out. The mechanical performance of the formation rock was analyzed by a full-scale coring indoor test. On this basis, a new matrix alloy material was developed to improve the grinding performance of the bit. Then, the impregnated cutting block was used to enhance the rock breaking ability, and the blade-type impregnated bit structure and the anti-sticking flow path were optimized. The caving falling into the oblique chip flute could be pushed upward to prevent the bit from being stuck. It was found that the ultra-fine alloy materials could be bonded to each other to form a firm adhesion, and the mechanical performance of bit matrix improved by more than 30%. The blade-type impregnated drill bit was used in the volcanic rock formation of Well Hashan 101 associated with a high-speed and high-torque screw power drill, the single bit footage was increased by 4 times and the ROP was increased by 54.3%. This technology also effectively reduced the risk of caving and sticking, and became an effective technical measure for safe and efficient drilling in such formations.

  • [1]
    张奎华,林会喜,张关龙,等. 哈山构造带火山岩储层发育特征及控制因素[J]. 中国石油大学学报(自然科学版), 2015, 39(2): 16–22. doi: 10.3969/j.issn.1673-5005.2015.02.003

    ZHANG Kuihua, LIN Huixi, ZHANG Guanlong, et al. Characteristics and controlling factors of volcanic reservoirs of Hala’alate mountains tectonic belt[J]. Journal of China University of Petroleum(Edition of Natural Science), 2015, 39(2): 16–22. doi: 10.3969/j.issn.1673-5005.2015.02.003
    [2]
    王贵新. 准噶尔盆地哈山山前构造带钻井分析[J]. 石化技术, 2017(3): 128. doi: 10.3969/j.issn.1006-0235.2017.03.105

    WANG Guixin. Analysis of drilling in Hassan piedmont tectonic belt of Zhungeer Basin[J]. Petrochemical Industry Technology, 2017(3): 128. doi: 10.3969/j.issn.1006-0235.2017.03.105
    [3]
    张学光. 哈山3井石炭系钻井提速探索与实践[J]. 内蒙古石油化工, 2013, 39(20): 38–40.

    ZHANG Xueguang. The exploration and practice of carboniferous ROP enhancement in Hassan 3 Well[J]. Inner Mongolia Petrochemical Industry, 2013, 39(20): 38–40.
    [4]
    梁奇敏,何俊才,张弘,等. 钻井提速工具经济性预测评价方法[J]. 石油钻探技术, 2017, 45(3): 57–61.

    LIANG Qimin, HE Juncai, ZHANG Hong, et al. Assessment of the economic performance of ROP enhancement tools[J]. Petroleum Drilling Techniques, 2017, 45(3): 57–61.
    [5]
    王滨,李军,邹德永,等. 适合强研磨性硬地层PDC–金刚石孕镶块混合钻头设计与应用[J]. 特种油气藏, 2018, 25(1): 169–174. doi: 10.3969/j.issn.1006-6535.2018.01.035

    WANG Bin, LI Jun, ZOU Deyong, et al. Design and application of a PDC hybrid drill bit with impregnated diamond insert for the hard formation with strong abrasivity[J]. Special Oil and Gas Reservoirs, 2018, 25(1): 169–174. doi: 10.3969/j.issn.1006-6535.2018.01.035
    [6]
    马凤清. 哈山3井火成岩地层快速钻井技术[J]. 石油钻探技术, 2014, 42(2): 112–116.

    MA Fengqing. Fast drilling technique through igneous rocks in Well Hashan 3[J]. Petroleum Drilling Techniques, 2014, 42(2): 112–116.
    [7]
    罗治奇. 火山岩地层钻进金刚石钻头寿命与效率的探讨[J]. 探矿工程(岩土钻掘工程), 2011, 38(2): 63–66. doi: 10.3969/j.issn.1672-7428.2011.02.019

    LUO Zhiqi. Discussion on service life and efficiency of diamond bit drilling in volcanic strata[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2011, 38(2): 63–66. doi: 10.3969/j.issn.1672-7428.2011.02.019
    [8]
    蔡家品,贾美玲,史强. 元坝地区新型金刚石钻头的研究与应用[J]. 探矿工程(岩土钻掘工程), 2010, 37(11): 70–72. doi: 10.3969/j.issn.1672-7428.2010.11.021

    CAI Jiapin, JIA Meiling, SHI Qiang. Research and application of new type of diamond bit in Yuanba Area[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2010, 37(11): 70–72. doi: 10.3969/j.issn.1672-7428.2010.11.021
    [9]
    赵尔信,蔡家品,贾美玲,等. 浅谈国内外金刚石钻头的发展趋势:高效、低耗[J]. 探矿工程(岩土钻掘工程), 2010, 37(10): 70–73, 81. doi: 10.3969/j.issn.1672-7428.2010.10.016

    ZHAO Erxin, CAI Jiapin, JIA Meiling, et al. Discussion on development trend of diamond bit both in China and abroad[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2010, 37(10): 70–73, 81. doi: 10.3969/j.issn.1672-7428.2010.10.016
    [10]
    牛洪波,冯光通,赵洪山,等. 哈山101 井火成岩地层空气锤钻井技术[J]. 石油钻采工艺, 2018, 40(2): 164–168.

    NIU Hongbo, FENG Guangtong, ZHAO Hongshan, et al. Application of air hammer drilling technology in the igneous strata of Well Hashan 101[J]. Oil Drilling & Production Technology, 2018, 40(2): 164–168.
  • Cited by

    Periodical cited type(9)

    1. 何蕙岚,王久全,黄伟艇,王超,丁向忠,罗巍,高科,赵研,闻育民. 钻探施工中孕镶金刚石钻头的适应性选择. 矿产与地质. 2024(02): 352-364 .
    2. 张茂林,辛飞,陈涛,周玉东,兰祖权. 南缘地区深层孕镶钻头配合螺杆的提速技术. 西部探矿工程. 2022(09): 92-95 .
    3. 郝少军,安小絮,施晓雯,江林. 柴达木盆地昆特依构造超深井钻井难点及对策——以昆1-1井为例. 天然气技术与经济. 2021(03): 42-48 .
    4. 徐良,刘一波,孙延龙,周劲辉. 油气钻井极硬岩层钻头用孕镶齿研究. 粉末冶金工业. 2021(04): 105-109 .
    5. 何淼,龚武镇,许明标,宋建建. 干热岩开发技术研究现状与展望分析. 可再生能源. 2021(11): 1447-1454 .
    6. 邹德永,陈雅辉,赵方圆,崔煜东. 斧形PDC齿破岩规律数值模拟研究. 特种油气藏. 2021(06): 137-143 .
    7. 彭齐,周英操,周波,刘川福,刘宇. 凸脊型非平面齿PDC钻头的研制与现场试验. 石油钻探技术. 2020(02): 49-55 . 本站查看
    8. 张辉. 大牛地气田丛式小井眼集约化钻井技术. 天然气技术与经济. 2020(02): 28-33 .
    9. 袁国栋,王鸿远,陈宗琦,母亚军,席宝滨. 塔里木盆地满深1井超深井钻井关键技术. 石油钻探技术. 2020(04): 21-27 . 本站查看

    Other cited types(1)

Catalog

    Article Metrics

    Article views (1332) PDF downloads (78) Cited by(10)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return