Design and Performance Analysis of the Measurement and Control Systems of the Dynamic Point-the-Bit Rotary Steerable Drilling Tool

LIU Jianhua; SI Jieru; GENG Yanfeng; ZHANG Wei; WANG Weiliang; WANG Kai

doi:10.11911/syztjs.2018135

Volume 46 Issue 6

Nov. 2018

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2018 > 46(6): 59-64. > DOI: 10.11911/syztjs.2018135

LIU Jianhua, SI Jieru, GENG Yanfeng, ZHANG Wei, WANG Weiliang, WANG Kai. Design and Performance Analysis of the Measurement and Control Systems of the Dynamic Point-the-Bit Rotary Steerable Drilling Tool[J]. Petroleum Drilling Techniques, 2018, 46(6): 59-64. DOI: 10.11911/syztjs.2018135

Citation:

PDF (1087 KB)

Design and Performance Analysis of the Measurement and Control Systems of the Dynamic Point-the-Bit Rotary Steerable Drilling Tool

1. Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China;
2. College of Information and Control Engineering, China University of Petroleum(Huadong), Qingdao, Shandong, 266580, China

More Information

Received Date: March 04, 2018
Revised Date: October 02, 2018

Graphical Abstract

Abstract

Abstract

With the goal of developing a high-performance rotary steerable drilling tool system,the design and performances analysis of the measurement and control system of Dynamic Point-the-Bit Rotary Steerable Drilling Tool(DPRSDT) were conducted. Based on a self-designed prototype of DPRSDT,the measurement and control system was designed,and its key technologies and properties were analyzed and validated by simulating the actual drilling conditions,which included the feasibility of the measurement and control scheme,the validity of the measuring signal processing and the control algorithm.Simulation results showed that the dynamic measurement error of tool face angle has been reduced by 84% by using a complementary filtering algorithm.Moreover,a four-closed-loop control system based on permanent magnet synchronous motor current loop,motor speed loop,stabilized platform to ground speed loop and stabilized platform position loop was proposed.In addition to satisfying the performance index of steerable drilling,the proposed control scheme could restrict the error of tool face angle within 5 degrees under the working condition of the stick-slip grade of 200%.It was shown that the dynamic measurement accuracy of tool face angle could be effectively improved by a complementary filtering algorithm,and the quick and stable control of the tool face angle could be accomplished by the four-closed-loop control system.The measurement and control performance indexes of the prototype satisfied the technical requirements of actual drilling engineering.
- rotary steerable drilling,
- drilling tool,
- measurement and control system,
- tool face angle,
- complementary filter,
- stabilized platform

FullText(HTML)

References (13)

References

[1]	王可可,李晓红,张光伟.指向式旋转导向钻井工具的典型结构和原理分析[J].河南科技,2012(10):78-79. WANG Keke,LI Xiaohong,ZHANG Guangwei.Typical structure and principle analysis of directional rotary steerable drilling tool[J].Henan Science and Technology,2012 (10):78-79.
[2]	薛凤龙.定向钻探技术应用现状分析及发展趋势[J].技术与市场,2016,23(5):158-159. XUE Fenglong.Application status analysis and development trend of directional drilling technology[J].Technology and Market,2016,23(5):158-159.
[3]	薛启龙,丁青山,黄蕾蕾.旋转导向钻井技术最新进展及发展趋势[J].石油机械,2013,41(7):1-6. XUE Qilong,DING Qingshan,HUANG Leilei.The latest progress and development trend of rotary steering drilling technology[J].China Petroleum Machinery,2013,41(7):1-6.
[4]	王伟亮,耿艳峰,李聪冉,等.动态指向式旋转导向钻井工具稳定平台的控制[J].石油机械,2017,45(8):7-12. WANG Weiliang,GENG Yanfeng,LI Congran,et al.Stabilized platform control for the dynamic point-the-bit rotary steerable drilling tool[J].China Petroleum Machinery,2017,45(8):7-12.
[5]	YAN Zhidan,GENG Yanfeng,WANG Zifang,et al.Design of offsetting steerable mechanism for rotary steerable drilling tool based on double eccentric rings[J].Applied Mechanics & Materials,2013,288:13-18.
[6]	王凯,王伟亮,佀洁茹,等.动态指向式旋转导向钻井工具的测控系统研究[J].石油机械,2018,46(2):35-38 ,67. WANG Kai,WANG Weiliang,SI Jieru,et al.Research on the measurement and control system of dynamic of dynamic point-the-bit rotary steerable drilling tools[J].China Pettoleum Machinery.2018,46(2):35-38,67.
[7]	边群星,陈锟,陈郑洲.基于互补滤波器的两轮平衡车姿态角度测量[J].电子设计工程,2014,22(18):55-58. BIAN Qunxing,CHEN Kun,CHEN Zhengzhou.Attitude angle measurement of two-wheeled balance vehicle based on complementary filter[J].Electronic Design Engineering,2014(18):55-58.
[8]	PODDAR S,NARKHEDE P,KUMAR V,et al.Author correction to:PSO aided adaptive complementary filter for attitude estimation[J].Journal of Intelligent & Robotic Systems,2017,87(3/4):531-543.
[9]	孙峰.捷联式自动垂直钻井系统稳定平台技术研究[D].青岛:中国石油大学(华东),2012. SUN Feng.Research on stabilizing platform for strapdown automatic vertical drilling system technology[D].Qingdao:China University of Petroleum(Huadong),2012.
[10]	YOO T S,HONG S K,YOON H M,et al.Gain-scheduled complementary filter design for a MEMS based attitude and heading reference system[J].Sensors,2011,11(4):3816-3830.
[11]	DUFEYTE M P,HENNEUSE H.Detection and monitoring of the slip-stick motion:field experiments[R].SPE 21945,1991.
[12]	SUGIURA J.The use of the near-bit vibration sensor while drilling lead to optimized rotary-steerable drilling in push and point-the-bit configurations[R].SPE 115572,2008.
[13]	汪跃龙,王海皎,康思民,等.导向钻井稳定控制平台的反馈线性化控制[J].石油学报,2014,35(5):952-957. WANG Yuelong,WANG Haijiao,KANG Simin,et al.Output feedback linearization of servo platform for rotary steering drilling system[J].Acta Petroleum Sinica,2014,35(5):952-957.

[1]	XU Tao, SHI Lianhai, XIAO Shijie, HAN Long, SHI Lin, LIU Haohong. Development and Field Test of Electronically Controlled Half-WayRotary Steerable Drilling Tool[J]. Petroleum Drilling Techniques, 2024, 52(6): 69-74. DOI: 10.11911/syztjs.2024111
[2]	GAO Zelin, WANG Jiaqi, ZHANG Qizi. Research on Architecture of Intelligent Logging Interpretation Software Platform[J]. Petroleum Drilling Techniques, 2024, 52(4): 128-134. DOI: 10.11911/syztjs.2023119
[3]	ZHANG Ximin. Optimization Study of Cluster Well Platform Deployment Based on Genetic Algorithm[J]. Petroleum Drilling Techniques, 2024, 52(4): 44-50. DOI: 10.11911/syztjs.2024080
[4]	LI Ranran, ZHANG Kai, CHAI Lin, ZHANG Long, LIU Baolin. Simulation Research on Influencing Factors of Stabilization Platform for Mechanical Vertical Drilling Tools[J]. Petroleum Drilling Techniques, 2022, 50(3): 51-60. DOI: 10.11911/syztjs.2021106
[5]	ZHU Zuyang, NI Weining, ZHANG Wei, MI Jintai, ZHENG Yiting. The Development of an Integrated Logging Instrument Platform while Drilling[J]. Petroleum Drilling Techniques, 2019, 47(1): 118-126. DOI: 10.11911/syztjs.2019016
[6]	LIU Xiangjun, DING Yi, LUO Pingya, LIANG Lixi. The Impact of Drilling Unloading on Wellbore Stability of Shale Formations[J]. Petroleum Drilling Techniques, 2018, 46(1): 10-16. DOI: 10.11911/syztjs.2018005
[7]	Liu Zhengli, Zhang Hao, Yang Wenxue, Zhang Yuting, Chang Yuanjiang. The Dynamic Characteristics of Mooring Semi-Submersible Drilling Platform in Typhoon[J]. Petroleum Drilling Techniques, 2015, 43(4): 37-42. DOI: 10.11911/syztjs.201504007
[8]	Wang Xu, Zhang Xinshu, You Yunxiang. The Study on Scale Effect of Internal Solitary Wave Loads of Cylindrical Drilling Platforms[J]. Petroleum Drilling Techniques, 2015, 43(4): 30-36. DOI: 10.11911/syztjs.201504006
[9]	Gu Chunwei, Luo Ming, Xu Yilong, Wu Jiang. Application of Tieback outside Casing in Horizontal Wells Drilled on Semi-Submersible Platforms[J]. Petroleum Drilling Techniques, 2014, 42(1): 46-49. DOI: 10.3969/j.issn.1001-0890.2014.01.009

Cited By

Cited by

Periodical cited type(16)

1.	蒋新立，李明忠，张军义，董强伟，李德红，宋文宇. 东胜气田致密气藏经济开发钻完井关键技术. 石油钻探技术. 2025(01): 10-16 . 本站查看
2.	史配铭，倪华峰，贺会锋，石崇东，李录科，张延兵. 鄂尔多斯盆地深层煤岩气水平井水平段安全钻井关键技术. 石油钻探技术. 2025(01): 17-23 . 本站查看
3.	杨胜利，张燊，王旭东，张凯，辛德林，翟瑞昊. 煤与天然气协同开采理论与技术构想. 煤炭科学技术. 2024(04): 50-68 .
4.	孙平涛，赵建忠，刘强. 吉林油田页岩油水平井二开钻井关键技术及应用. 天然气勘探与开发. 2024(03): 111-117 .
5.	张心玉，刘灵，李贤思，马炳奇. 苏77-召51区块水平井井身结构优化及应用. 西部探矿工程. 2024(09): 55-59 .
6.	董文浩，王琦，衣方宇，夏方杰，魏守忠. 苏里格小井眼侧钻水平井钻井提速配套技术. 内蒙古石油化工. 2024(08): 82-85 .
7.	何龙，何新星，张玉胜，严焱诚，刘伟，朱礼平. 川南下寒武统筇竹寺组井研—犍为地区瘦身井优化评价研究. 西南石油大学学报(自然科学版). 2024(06): 155-164 .
8.	杨树东，武兴勇，钟震，宋琳. 新疆油田某区块井身结构优化设计与应用. 广东化工. 2023(04): 129-131 .
9.	龙志平，陈士奎，曹建山，丁锦鹤. 小井眼钻井技术在页岩气井的实践与认识. 石油机械. 2023(04): 30-38 .
10.	余浩杰，王振嘉，李进步，朱亚军. 鄂尔多斯盆地长庆气区复杂致密砂岩气藏开发关键技术进展及攻关方向. 石油学报. 2023(04): 698-712 .
11.	倪华峰. 陕224区块储气库水平井钻完井关键技术优化. 石油钻采工艺. 2023(01): 31-37 .
12.	张金平，倪华锋，史配铭. 鄂尔多斯盆地东部气田盐下高含硫储层安全高效钻井技术. 石油钻探技术. 2023(03): 22-29 . 本站查看
13.	秦永和，范永涛，陈文辉，刘越，李晓军，王舸. 静态推靠式旋转导向控制模型与造斜率预测方法. 石油钻探技术. 2023(04): 74-80 . 本站查看
14.	曹辉，李宝军，赵向阳. 厄瓜多尔Tambococha油田水平井钻井液技术. 石油钻探技术. 2022(01): 54-59 . 本站查看
15.	王文刚，胡大梁，欧彪，房舟，刘磊. 井研–犍为地区缝洞型复杂地层钻井关键技术. 石油钻探技术. 2022(02): 58-63 . 本站查看
16.	王萍，樊佳勇，韩成福，王亮，屈展，黄海，顾甜利. 苏里格气田区小井眼二开水平井优化设计. 科学技术与工程. 2022(28): 12349-12354 .

Other cited types(2)

Get Citation

PDF

XML

Article Metrics

Article views (7992) PDF downloads (129) Cited by(18)

Design and Performance Analysis of the Measurement and Control Systems of the Dynamic Point-the-Bit Rotary Steerable Drilling Tool

Abstract

References

Related Articles

Cited by

Periodical cited type(16)

Other cited types(2)

Catalog

Article Metrics

Related

Design and Performance Analysis of the Measurement and Control Systems of the Dynamic Point-the-Bit Rotary Steerable Drilling Tool

Abstract

References

Related Articles

Cited by

Periodical cited type(16)

Other cited types(2)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content