TU Yulin, YANG Hongqi, HU Yanfeng, TAO Xinghua, LIU Xiaodan. Simulation and Experimental Study on the Safe Application Condition of Expandable Profile Liner in Slim Holes[J]. Petroleum Drilling Techniques, 2018, 46(2): 69-74. DOI: 10.11911/syztjs.2018034
Citation: TU Yulin, YANG Hongqi, HU Yanfeng, TAO Xinghua, LIU Xiaodan. Simulation and Experimental Study on the Safe Application Condition of Expandable Profile Liner in Slim Holes[J]. Petroleum Drilling Techniques, 2018, 46(2): 69-74. DOI: 10.11911/syztjs.2018034

Simulation and Experimental Study on the Safe Application Condition of Expandable Profile Liner in Slim Holes

More Information
  • Received Date: July 31, 2017
  • Although the expandable profile liner technology has been successfully applied to sealing collapsed coal seams and mudstones in inclined sections of slim holes and provides a new means to solve the formation collapse problem,the uncertainty of applicable working condition limits the widespread use of the technology.To determine the safe working conditions of expandable profile liner in slim holes and secure the application,the finite element method was used to simulate and analyze the influence factors for application of φ149.2 mm expandable profile liner in inclined sections.An expansion test of expandable profile liner was made in wellbore hole simulator to analyze the influence of borehole curvature and hole diameter on the application.Under same conditions,the greater the hole diameter was, the larger the diameter of the expanded liner wouldbe;the larger the borehole curvature was,the greater the Mises stress and the higher the ellipticity wouldbe.The results of the test and numerical analysis were consistent.The safe working conditions for the φ149.2 mm expandable profile liner were defined through analysis,thus the safe application could be guaranteed.
  • [1]
    张建兵,练章华,贾应林.采用膨胀套管技术优化复杂深井超深井下部井身结构[J].石油钻采工艺,2008,30(4):1-4. ZHANG Jianbing,LIAN Zhanghua,JIA Yinglin.Optimization of bottom casing program of complicated deep and ultra-deepwells based on expandable casing techniques[J].Oil Drilling Production Technology,2008,30(4):1-4
    [2]
    刘鹏,夏柏如,陶兴华,等.膨胀波纹管在大牛地气田定向井段的应用[J].石油钻探技术,2017,45(2):61-67. LIU Peng,XIA Bairu,TAO Xinghua,et al.The application of solid expandable liners in directional well sections of the Daniudi Gas Field[J].Petroleum Drilling Techniques,2017,45(2):61-67.
    [3]
    胥豪,崔海林,张玲,等.塔河油田膨胀管井钻井技术[J].石油钻采工艺,2013,35(4):26-29. XU Hao,CUI Hailin,ZHANG Ling,et al.Expandable tubular drilling technology in Tahe Oilfield[J].Oil Drilling Production Technology,2013,35(4):26-29.
    [4]
    胡彦峰,涂玉林,陶兴华.φ149.2mm膨胀波纹管在塔河油田侧钻井的应用[J].石油机械,2013,41(1):27-30. HU Yanfeng,TU Yulin,TAO Xinghua.Application of the φ149.2 mm expandable bellows in sidetracked wells of Tahe Oilfield[J].China Petroleum Machinery,2013,41(1):27-30.
    [5]
    胡彦峰,涂玉林,汪胜武,等.膨胀波纹管技术降低钻井风险实践[J].西部探矿工程,2011,25(2):91-94,97. HU Yanfeng,TU Yulin,WANG Shengwu,et al.Expandable profiled liner technology minimized drilling risk[J].West-China Exploration Engineering,2011,25(2):91-94,97.
    [6]
    杨海波,侯婷,冯德杰,等.免钻式膨胀管补贴技术研究与现场试验[J].石油钻探技术,2017,45(5):73-77. YANG Haibo,HOU Ting,FENG Dejie,et al.Research and field test of non-drilling plug expandable casing patching technology[J].Petroleum Drilling Techniques,2017,45(5):73-77.
    [7]
    刘桂君.膨胀波纹管封隔坍塌煤层技术在大牛地成功应用[J].西部探矿工程,2016,28(3):80-81,85. LIU Guijun.The expandable profile liner sealing instable coal formation technology is successfully applied in Daniudi Gas Field[J].West-China Exploration Engineering,2016, 28(3):80-81,85.
    [8]
    张辉,王锦昌,王翔,等.膨胀波纹管技术在大斜度井易垮塌地层的应用[J].断块油气田,2015,22(3):394-397. ZHANG Hui,WANG Jinchang,WANG Xiang,et al.Application of expandable convoluted tubing technique in easy collapsed formation of highly deviated well[J].Fault-Block Oil Gas Field,2015,22(3):394-397.
    [9]
    吴明畏,张伟,刘进余,等.可膨胀波纹管堵漏技术应用[J].石油矿场机械,2013,42(11):72-75. WU Mingwei,ZHANG Wei,LIU Jinyu,et al.Expandable bellows plugging technology applied research[J].Oil Field Equipment,2013,42(11):72-75.
    [10]
    杨顺辉,黄永洪,陶兴华,等.可膨胀波纹管技术在韦15-19井的应用[J].石油钻探技术,2007,35(3):55-57. YANG Shunhui,HUANG Yonghong,TAO Xinghua,et al.The application of expandable convoluted tubing technique in Well Wei 15-19[J].Petroleum Drilling Techniques, 2007,35(3):55-57.
    [11]
    刘鹏,夏柏如,程光明,等.膨胀波纹管端头整形装置的研制及应用[J].石油钻探技术,2017,45(3):77-82. LIU Peng,XIA Bairu,CHENG Guangmin,et al.The development and application of restoration device for expandable profile liner ends[J].Petroleum Drilling Techniques,2017,45(3):77-82.
    [12]
    胡彦峰,涂玉林,肖京男,等.提高膨胀波纹管挤毁强度的方法探讨[J].石油矿场机械,2015,44(2):10-13. HU Yanfeng,TU Yulin,XIAO Jingnan,et al.Approach to improve the collapsing strength of the expandable bellow[J].Oil Field Equipment,2015,44(2):10-13.
    [13]
    李虎,段庆全,朱冰冰,等.膨胀波纹管抗外挤强度的影响因素分析[J].焊管,2017,40(3):1-4. LI Hu,DUAN Qingquan,ZHU Bingbing,et al.Influence factors analysis of expansion bellows collapse resistance strength[J].Welded Pipe and Tube,2017,40(3):1-4.
    [14]
    刘晓丹,张海平,陶兴华.热处理和振动时效复合法消除膨胀波纹管残余应力[J].热加工工艺,2015,44(6):189-192. LIU Xiaodan,ZHANG Haiping,TAO Xinghua.Composition of heat treatment and vibratory stress relief on elimination of residual stress of expandable corrugated pipe[J].Hot Working Technology,2015,44(6):189-192.
    [15]
    陶兴华,朱宏武,王镇全,等.膨胀波纹管胀管器结构设计与试验[J].石油机械,2011,39(7):30-33. TAO Xinghua,ZHU Hongwu,WANG Zhenquan,et al.The structural design and experiment of the expandable bellows expander[J].China Petroleum Machinery,2011,39(7):30-33.
    [16]
    陶兴华,朱宏武,张宏,等.波纹管成型及膨胀过程力学性能分析[J].石油机械,2011,39(3):12-15. TAO Xinghua,ZHU Hongwu,ZHANG Hong,et al.An analysis of the mechanical properties of the forming and expansion process of the bellow[J].China Petroleum Machinery,2011, 39(3):12-15.
    [17]
    陈晓君,宋刚,孟庆鸿,等.小口径勘探用可膨胀波纹管ANSYS模拟与实验分析[J].探矿工程(岩土钻掘工程),2014,41(11):37-40,45. CHEN Xiaojun,SONG Gang,MENG Qinghong,et al.ANSYS simulation of expandable convoluted tubing for small diameter bore prospecting and experimental analysis[J].Exploration Engineering(Rock Soil Drilling and Tunneling),2014,41(11):37-40,45.
    [18]
    尹飞,高宝奎,张进,等.油井堵漏可膨胀波纹管的有限元分析[J].石油机械,2012,40(5):66-69. YIN Fei,GAO Baokui,ZHANG Jin,et al.Finite element analysis of the expandable bellows for oil well plugging[J].China Petroleum Machinery,2012,40(5):66-69.
    [19]
    郭慧娟,王辉,耿莉,等.可膨胀波纹管有限元分析与现场应用[J].石油机械,2008,36(9):99-101. GUO Huijuan,WANG Hui,GENG Li,et al.Finite element analysis and field use of expandable bellows[J].China Petroleum Machinery,2008,36(9):99-101.
  • Cited by

    Periodical cited type(5)

    1. 何滔,顾栩. TRB管无补料液压胀形波纹管的研究. 锻压技术. 2023(04): 103-109 .
    2. 王建军,陶兴华,邹勇,薛龙. 膨胀波纹管焊接工艺及焊缝膨胀性能分析. 石油钻探技术. 2022(03): 61-65 . 本站查看
    3. 马汝涛,罗淮东,徐丙贵,周英鹏. 可膨胀波纹管截面设计计算与评估方法. 石油机械. 2019(03): 14-18 .
    4. 刘鹏,陶兴华,胡彦峰,涂玉林. 提高膨胀波纹管在弯曲井眼中应用可靠性研究. 石油钻采工艺. 2019(02): 170-177 .
    5. 郭强,张德龙,黄玉文,翁炜,杨鹏,蒋睿,徐军军. 可膨胀波纹管水力膨胀力学特性研究. 探矿工程(岩土钻掘工程). 2019(12): 50-55 .

    Other cited types(3)

Catalog

    Article Metrics

    Article views (1677) PDF downloads (1783) Cited by(8)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return