A Method of Calculating of Avoiding Collisions with Adjacent Wells Using Electromagnetic Ranging Surveying while Drilling Tools

LI Cui; GAO Deli; LIU Qinglong; KONG Xue

doi:10.11911/syztjs.201605009

Volume 44 Issue 5

Sep. 2016

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2016 > 44(5): 52-59. > DOI: 10.11911/syztjs.201605009

LI Cui, GAO Deli, LIU Qinglong, KONG Xue. A Method of Calculating of Avoiding Collisions with Adjacent Wells Using Electromagnetic Ranging Surveying while Drilling Tools[J]. Petroleum Drilling Techniques, 2016, 44(5): 52-59. DOI: 10.11911/syztjs.201605009

Citation:

PDF (1354 KB)

A Method of Calculating of Avoiding Collisions with Adjacent Wells Using Electromagnetic Ranging Surveying while Drilling Tools

1.
Drilling Technology Research Institute of Shengli Oilfield Service Corporation, Sinopec, Dongying, Shandong, 257000, China;
2.
Key Laboratory for Petroleum Engineering of the Ministry of Education, China University of Petroleum(Beijing), Beijing, 102249, China;
3.
College of Petroleum Engineering, Shengli College, China University of Petroleum, Dongying, Shandong, 257061, China

More Information

Received Date: March 01, 2016
Revised Date: August 03, 2016

Graphical Abstract

Abstract

Abstract

To eliminate the possibility of colliding with other wells in cluster wells, preliminary research has been performed to determine a ranging calculation method to avoid collision with adjacent wells using ranging electromagnetic surveying while drilling tools. Based on structure and fundamental principles of such electromagnetic tools, the magnetic source was regarded as a magnetic dipole to determine the distribution of magnetic fields around the magnetic source in accordance with the magnetic dipole theory. In this way, models for calculation of magnetic fields around the adjacent casing and intensity of magnetic induction around probe. In addition, the ranging calculation method of anti-collision while drilling by using electromagnetic anti-collision tools was established. Numerical simulation and other methods were adopted to determine the impact of parameters such as the magnetic source spacing inside the probe, the magnetic moment of magnetic source, the relative permeability of the casing, the diameter of casing, and the included angle between the drilling well and the adjacent well. It also included the magnetic induction intensity around the probe (positively correlated to spacing between sources), magnetic moments, relatively magnetic conductivity and diameter of casing, and other parameters. The proper design of key parameters of such tools could effectively enhance the intensity of magnetic induction around the probe and promote the accuracy of such tools. Research results showed that the newly developed ranging methods for avoiding colliding with adjacent wells while drilling by using electromagnetic tools could be used to determine the spacing and azimuth between the well being drilled and adjacent well in real time. These tools could basically satisfy demands for the drilling of cluster wells and may have great significance in the development of such anti-collision surveying tools.
- cluster wells,
- adjacent wells,
- wellbore anti-collision,
- electromagnetic surveying,
- calculation method

FullText(HTML)

References (15)

References

[1]	高德利.复杂结构井优化设计与钻完井控制技术[M].东营:中国石油大学出版社,2011:40-67. GAO Deli.Optimized design and control techniques for drilling completion of complex-structure wells[M].Dongying:China University of Petroleum Press,2011:40-67.
[2]	魏刚,张春琳,邵明仁.小井距密集丛式定向井防碰技术[J].内蒙古石油化工,2010,36(2):99-101. WEI Gang,ZHANG Chunlin,SHAO Mingren.Anti-collision technology of short-distance directional cluster well[J].Inner Mongolia Petrochemical Industry,2010,36(2):99-101.
[3]	POEDJONO B,CONRAN G,AKINNIRANYE G,et al.Minimizing the risk of well collisions in land and offshore drilling[R].SPE 108279,2007.
[4]	张凤久,罗宪波,刘英宪,等.海上油田丛式井网整体加密调整技术研究[J].中国工程科学,2011,13(5):34-40. ZHANG Fengjiu,LUO Xianbo,LIU Yingxian,et al.Research on overall encryption adjustment technology of offshore oil field[J].Engineering Science,2011,13(5):34-40.
[5]	POEDJONO B,PHILLIPS J W,LOMBARDO G.Anti-collision risk management stanard for well placement[R].SPE 121040,2009.
[6]	POEDJONO B,ISEVCAN E,LOMBARDO G J,et al.Anti-collision and risk management offshore Qatar:a successful collaboration[R].IPTC 13142,2009.
[7]	刁斌斌.邻井距离随钻电磁探测与扫描监测计算方法研究[D].北京:中国石油大学(北京),2012. DIAO Binbin.Research on calculation methods for scanning monitoring electromagnetic detection of adjacent well distance while drilling[D].Beijing:China University of Petroleum (Beijing),2012.
[8]	刁斌斌,高德利.邻井定向分离系数计算方法[J].石油钻探技术,2012,40(1):22-27. DIAO Binbin,GAO Deli.Calculation method of adjacent well oriented separation factors[J].Petroleum Drilling Techniques,2012,40(1):22-27.
[9]	GRILLS T L.Magnetic ranging technologies for drilling steam assisted gravity drainage well pairs and unique well geometries:a comparison of technologies[R].SPE 79005,2002.
[10]	王德桂,高德利.管柱形磁源空间磁场矢量引导系统研究[J].石油学报,2008,29(4):608-611. WANG Degui,GAO Deli.Study of magnetic vector guide system in tubular magnet source space[J].Acta Petrolei Sinica,2008,29(4):608-611.
[11]	李翠,高德利.救援井与事故井连通探测方法初步研究[J].石油钻探技术,2013,41(3):56-61. LI Cui,GAO Deli.Preliminary research on detection method for connecting relief well to blowout well[J].Petroleum Drilling Techniques,2013,41(3):56-61.
[12]	席宝滨,高德利.U形水平井连通过程中的相对位置不确定性分析[J].石油钻探技术,2014,42(6):18-24. XI Baobin,GAO Deli.Analysis of the relative position uncertainty in the intersecting process of U-shaped horizontal wells[J].Petroleum Drilling Techniques,2014,42(6):18-24.
[13]	唐劲飞,龚沈光,王金根.基于磁偶极子模型的目标定位和参数估计[J].电子学报,2002,30(4):614-616. TANG Jinfei,GONG Shenguang,WANG Jingen.Target positioning and parameter estimation based on magnetic dipole model[J].Acta Electronica Sinica,2002,30(4):614-616.
[14]	张玉民,戚伯云.电磁学[M].北京:科学出版社,2000:79-96. ZHANG Yumin,QI Boyun.Electromagnetics[M].Beijing:Science Press,2000:79-96.
[15]	陈小斌,赵国泽.关于人工源极低频电磁波发射源的讨论:均匀空间交流点电流源的解[J].地球物理学报,2009,52(8):2158-2164. CHEN Xiaobin,ZHAO Guoze.Study on the transmitting mechanism of CSELF waves:response of the alternating current point source in the uniform space[J].Chinese Journal of Geophysics,2009,52(8):2158-2164.

[1]	LIU Xing, QIU Jian, CHEN Zuo, ZHANG Xudong, LI Shuangming, QI Zili. Calculation Method for Complex Fracture Network Area of Shale Fracturing Based on Octree Grid[J]. Petroleum Drilling Techniques, 2024, 52(6): 117-125. DOI: 10.11911/syztjs.2024101
[2]	ZHANG Guilin. Modification of the Relative Time Method Calculation Formula for Oil and Gas Up-Channeling Velocity[J]. Petroleum Drilling Techniques, 2024, 52(1): 32-37. DOI: 10.11911/syztjs.2023102
[3]	LIU Hui, DING Xinlu, ZHANG Shijie, FANG Yungui, HAO Xiaobo, ZHENG Weige. Integrated Calculation Method of Pressure and Formation Parameters in Gas Injection Process of Underground Gas Storage[J]. Petroleum Drilling Techniques, 2022, 50(6): 64-71. DOI: 10.11911/syztjs.2022047
[4]	CHEN Zhongshuai, WU Zhonghua, SI Yinghui. Development and Testing of a Graphene-Modified Sponge Coring Tool[J]. Petroleum Drilling Techniques, 2020, 48(6): 71-75. DOI: 10.11911/syztjs.2020111
[5]	LI Cui, GAO Liping, LI Jia, GAO Deli, HOU Yukun. Experiment Research on an Electromagnetic Anti-Collision Detection Tool while Drilling Adjacent Wells[J]. Petroleum Drilling Techniques, 2017, 45(6): 110-115. DOI: 10.11911/syztjs.201706020
[6]	Tu Bin, Han Jie, Sun Jian. A Calculation Method of Critical Production for Oil Wells in Thick Reservoirs with Bottom Water[J]. Petroleum Drilling Techniques, 2014, 42(4): 107-110. DOI: 10.3969/j.issn.1001-0890.2014.04.020
[7]	Li Longlong, Wu Minglu, Yao Jun, Li Yang, Li Xiaoxue. Calculation Method of the Productivity of Partially Perforated Vertical Well[J]. Petroleum Drilling Techniques, 2014, 42(3): 80-89. DOI: 10.3969/j.issn.1001-0890.2014.03.016
[8]	Li Hao, Sun Baojiang, Gao Yonghai, Wang Jintang, Wang Ning. Design and Calculation of Hydraulic Parameters for Controlling Mud Cap in Deepwater Drilling[J]. Petroleum Drilling Techniques, 2013, 41(3): 13-18. DOI: 10.3969/j.issn.1001-0890.2013.03.003
[9]	Diao Binbin, Gao Deli. Calculation Method of Adjacent Well Oriented Separation Factors[J]. Petroleum Drilling Techniques, 2012, 40(1): 22-27. DOI: 10.3969/j.issn.1001-0890.2012.01.005
[10]	A New and Simple Method for Calculating Horizontal Well Inflow Distribution[J]. Petroleum Drilling Techniques, 2011, 39(4): 90-94. DOI: 10.3969/j.issn.1001-0890.2011.04.019

Cited By

Cited by

Periodical cited type(10)

1.	李富强，宋朝晖，伊明，刘洪涛，张森，刁斌斌. 救援井磁测距时电极与探管最优距离的计算. 石油钻探技术. 2024(03): 34-39 . 本站查看
2.	刘永升，豆子钧，周兢，杜兵建，张健松. 应急救援钻探轨道设计及软件应用现状研究. 矿业安全与环保. 2024(06): 168-176 .
3.	Lu Cheng，Xiao-Hua Che，Wen-Xiao Qiao，Teng Zhao. 3D trajectory inversion of an adjacent well using scattered P-wave. Petroleum Science. 2023(02): 857-865 .
4.	蒲文学，范光第，朱建建，赵国山. 磁性随钻测斜仪所需无磁钻具长度及影响因素研究. 石油钻探技术. 2022(04): 129-134 . 本站查看
5.	刘永辉，李然，朱宽亮. 密集丛式井磁干扰情况下防碰判断与控制方法. 钻采工艺. 2021(01): 43-47 .
6.	于瑞丰，刁斌斌，高德利. 基于邻井距离测量误差的救援井磁测距工具优选方法. 石油钻探技术. 2021(06): 118-124 . 本站查看
7.	陈晓晖，高炳堂，宋朝晖. 超高阻盐膏层随钻电磁中继传输特性研究. 石油钻探技术. 2018(03): 114-119 . 本站查看
8.	窦新宇，梁华庆. 丛式井电磁防碰信号采集系统设计. 仪表技术与传感器. 2018(02): 109-112+138 .
9.	范光第，蒲文学，赵国山，黄根炉. 磁力随钻测斜仪轴向磁干扰校正方法. 石油钻探技术. 2017(04): 121-126 . 本站查看
10.	李翠，高丽萍，李佳，高德利，侯煜琨. 邻井随钻电磁测距防碰工具模拟试验研究. 石油钻探技术. 2017(06): 110-115 . 本站查看

Other cited types(8)

Get Citation

PDF

XML

Article Metrics

Article views (15447) PDF downloads (15639) Cited by(18)

A Method of Calculating of Avoiding Collisions with Adjacent Wells Using Electromagnetic Ranging Surveying while Drilling Tools

Abstract

References

Related Articles

Cited by

Periodical cited type(10)

Other cited types(8)

Catalog

Article Metrics

Related

A Method of Calculating of Avoiding Collisions with Adjacent Wells Using Electromagnetic Ranging Surveying while Drilling Tools

Abstract

References

Related Articles

Cited by

Periodical cited type(10)

Other cited types(8)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content