Volume 43 Issue 6
Nov.  2015
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Luo Bing, Zhang Huawei, Chen Xinjin. An Integrated Well Killing Technology Applied after Gas Well Testing in Long Open Hole in Block Yemen 71[J]. Petroleum Drilling Techniques, 2015, 43(6): 98-102. DOI: 10.11911/syztjs.201506018
Citation: Luo Bing, Zhang Huawei, Chen Xinjin. An Integrated Well Killing Technology Applied after Gas Well Testing in Long Open Hole in Block Yemen 71[J]. Petroleum Drilling Techniques, 2015, 43(6): 98-102. DOI: 10.11911/syztjs.201506018
shu

An Integrated Well Killing Technology Applied after Gas Well Testing in Long Open Hole in Block Yemen 71

  • 1.

    Sinopec International Petroleum Exploration and Production Corporation, Beijing, 100029, China;

  • 2.

    Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China

More Information
  • Received Date: March 24, 2015
  • Revised Date: November 15, 2015
    Graphical Abstract
    • Abstract
  • In order to push and circulate out the oil and gas retained in the pocket below the packer during the well killing for long open hole testing of oil and gas wells in Block Yemen 71, an integrated well killing method combining bullheading well killing method with reverse-circulation throttle well killing method was developed after the test wells were seriously analyzed in terms of reservoir geological information and engineering parameters. Based on the integrated technologies, all well killing problems were handled successfully within 48 hours after the testing of 4 exploration wells in this block. Although the length of open hole pocket reached 710m in Well Henin-1ST, it only took 27 hours to kill the well without overflow or mud lose, and the DST strings and tools were pulled out of the hole safely and smoothly. Based on field application, this integrated well killing method was a reasonable solution for well testing operation, and it could be utilized effectively in other engineering projects with similar operational conditions.
    • FullText(HTML)
    • References (10)
  • [1]
    纳尔逊 R A.天然裂缝性储集层地质分析[M].北京:石油工业出版社,1991:123-130. Nelson R A.Natural geological analysis fractured reservoirs[M].Beijing:Petroleum Industry Press,1991:123-130.
    [2]
    张兴全,李相方,任美鹏,等.硬顶法井控技术研究[J].石油钻探技术,2012,40(3):62-66. Zhang Xingquan,Li Xiangfang,Ren Meipeng,et al.Research on the well control techniques of bullheading[J].Petroleum Drilling Techniques,2012,40(3):62-66.
    [3]
    李勇政,袁骐骥,方军,等.挤压法压井计算与应用[J].石油钻探技术,2010,38(4):63-66. Li Yongzheng,Yuan Qiji,Fang Jun,et al.Calculation and application of bullheading[J].Petroleum Drilling Techniques,2010,38(4):63-66.
    [4]
    Robert D Grace.Advanced blowout well control[M].Houston:Gulf Publishing Company,1994:218-256.
    [5]
    集团公司井控培训教材编写组.钻井井控工艺技术[M].东营:中国石油大学出版社,2008:128-136. Writing Group of Sinopec Well Control Training Materials.Drilling well control technology[M].Dongying:China University of Petroleum Press,2008:128-136.
    [6]
    孙孝真.实用井控手册[M].北京:石油工业出版社,2013:85-109. Sun Xiaozhen.Practical well control[M].Beijing:Petroleum Industry Press,2013:85-109.
    [7]
    王志远,邢廷瑞,华美瑞,等.深水压井节流管线内的气体交换效应分析[J].石油钻探技术,2013,41(3):19-24. Wang Zhiyuan,Xing Tingrui,Hua Meirui,et al.Analysis on gas exchange effect in choke line with deepwater well killing[J].Petroleum Drilling Techniques,2013,41(3):19-24.
    [8]
    陶现林,徐泓,母亚军.非常规压井技术的应用[J].断块油气田,2014,21(2):252-255. Tao Xianlin,Xu Hong,Mu Yajun.Research and application of unconventional well killing technique[J].Fault-Block Oil Gas Field,2014,21(2):252-255.
    [9]
    任美鹏,李相方,马庆涛,等.起下钻过程中井喷压井液密度设计新方法[J].石油钻探技术,2013,41(1):25-30. Ren Meipeng,Li Xiangfang,Ma Qingtao,et al.A new design method of killing fluid density against blowout during tripping[J].Petroleum Drilling Techniques,2013,41(1):25-30.
    [10]
    陈涛平.石油工程[M].北京:石油工业出版社,2011:126-138. Chen Taoping.Petroleum engineering[M].Beijing:Petroleum Industry Press,2011:126-138.
    • Related Articles

  • Related Articles

    [1]ZHU Lei, PAN Jinlin, CHEN Xuelian, MA Rui, TIAN Longmei, ZHOU Haodong. Influence of Casing and Cement Sheath Dimensions on Casing Waves in CBL/VDL Logging[J]. Petroleum Drilling Techniques, 2025, 53(1): 136-143. DOI: 10.11911/syztjs.2025016
    [2]LI Wandong, WU Yang, LAN Xiaolin. Cementing Technologies of Balanced Off-Bottom Cement Plugs in Eastern Ecuador[J]. Petroleum Drilling Techniques, 2022, 50(4): 83-89. DOI: 10.11911/syztjs.2022032
    [3]DING Shidong, LIU Kui, LIU Xiaogang, ZHOU Shiming, TAO Qian, LI Pengcheng. The Effect of Pre-Applied Annulus Back Pressure Cementing on Radial Stress of Interfaces in Double Layer Casing Systems[J]. Petroleum Drilling Techniques, 2022, 50(1): 30-37. DOI: 10.11911/syztjs.2021052
    [4]CHEN Lei, ZHOU Shiming, ZHAO Yan, GAO Yuan, TAN Chunqin, XU Chunhu. Study of a Thermosetting Resin-Magnesia Cement Composite for Cementing[J]. Petroleum Drilling Techniques, 2019, 47(2): 74-80. DOI: 10.11911/syztjs.2019011
    [5]ZHENG Xiaozhi, ZHOU Baode, ZHANG Hongyan, DAI Wenchao, CHEN Zhifeng, LI Fenglei. Development and Performance Tests of Remotely-Controlled Cement Head[J]. Petroleum Drilling Techniques, 2017, 45(4): 81-86. DOI: 10.11911/syztjs.201704014
    [6]TIAN Qizhong. The Development and Application of Cement Sheath Squeezing and Acid Washing String[J]. Petroleum Drilling Techniques, 2016, 44(3): 67-71. DOI: 10.11911/syztjs.201603012
    [7]Feng Dejie, Li Guofeng, Zhao Yong. ø139.7 mm Plug-Drilling-Free Well Cementing Completion Technology[J]. Petroleum Drilling Techniques, 2014, 42(5): 131-134. DOI: 10.11911/syztjs.201405024
    [8]Li Guoqing. Analysis of Boundary Condition of Stress Calculation on Casing/Cement-Sheath[J]. Petroleum Drilling Techniques, 2012, 40(2): 20-24. DOI: 10.3969/j.issn.1001-0890.2012.02.004
    [9]Zhou Weidong, Xia Boru, Li Luopeng, Shi Wei. Variable Jet Distance and Multi-Stage Cutting Head with Abrasive Water Jet[J]. Petroleum Drilling Techniques, 2012, 40(1): 109-113. DOI: 10.3969/j.issn.1001-0890.2012.01.022

  • Cited by

    Periodical cited type(4)

    1. 于明武，梁晓阳，王信鹏. 水下释放胶塞系统研发与应用. 机械工程师. 2024(07): 90-92+96 .
    2. 钟功祥，张言开，张伟杰. 基于p-y曲线法的受水平载荷水下井口水平度研究. 石油机械. 2019(02): 65-69 .
    3. 惠坤亮，张宏桥，王定亚，钟兴强，张有锋，吴小雄，朱浩铭. 深水遥控水泥头的研制与应用. 机械工程师. 2019(10): 100-101+104 .
    4. 戴文潮，陈志峰，吴玉旺，马兰荣，张国安，邹传元. 深水固井水泥头关键技术研究. 石油机械. 2017(11): 46-49 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (2715) PDF downloads (2854) Cited by(4)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return