Volume 43 Issue 5
Sep.  2015
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Qiao Lingliang, Hu Daliang, Xiao Guoyi. ROP Improvement Technology for High-Pressure Terrestrial Tight Abrasive Formations in the Yuanba Gas Field[J]. Petroleum Drilling Techniques, 2015, 43(5): 44-48. DOI: 10.11911/syztjs.201505008
Citation: Qiao Lingliang, Hu Daliang, Xiao Guoyi. ROP Improvement Technology for High-Pressure Terrestrial Tight Abrasive Formations in the Yuanba Gas Field[J]. Petroleum Drilling Techniques, 2015, 43(5): 44-48. DOI: 10.11911/syztjs.201505008
shu

ROP Improvement Technology for High-Pressure Terrestrial Tight Abrasive Formations in the Yuanba Gas Field

  • 1.

    Sinopec Southwest Petroleum Branch, Chengdu, Sichuan, 610041, China;

  • 2.

    Petroleum Engineering Technology Research Institute of Sinopec Southwest Petroleum Branch, Deyang, Sichuan, 618000, China

More Information
  • Received Date: January 08, 2015
  • Revised Date: August 23, 2015
    Graphical Abstract
    • Abstract
  • Drilling footage and service life of cone bits were short and the comprehensive benefits were low in the Yuanba Gas Field,due to the fact that the Ziliujing and Xujiahe Formations in deep onshore regions are tight, hard and highly abrasive. Based on practical drilling situations, high-efficiency drill bits were selected through the analysis of the formations’ drillability and rock breaking principles. Appropriate dynamic drilling tools were selected according to the matching principle of drill bits and drilling tools.Then, field tests were conducted on the following three drill bits and tools combinations, including imported impregnated diamond bits and high-speed turbines, impregnated diamond bits and screws, and cones and PDC. Drill bits were selected on the basis of specific energy for unit footage consumption, and the three combinations were economically evaluated using breakeven analysis. Based on field test results, adoption was recommended for the homemade impregnated diamond bit and high-speed screw drilling for high-pressure and highly abrasive tight formations, and the impregnated diamond bit and high-speed turbo drilling for Zhenzhuchong Formation with high gravel content, and the cone and PDC drilling for high-pressure tight formations with more interbeds of sandstones and mudstones. Studies showed that the application of homemade impregnated diamond drill bit and high-speed screw drilling gave the best economic benefit contributions, followed by cone and PDC drilling followed by the imported impregnated diamond drill bit and high-speed turbo drilling.
    • FullText(HTML)
    • References (11)
  • [1]
    张克勤.元坝地区钻井难题分析与技术对策探讨[J].石油钻探技术,2010,38(3):27-31. Zhang Keqin.Problems arising from drilling operations in Yuanba Area and its solutions[J].Petroleum Drilling Techniques,2010,38(3):27-31.
    [2]
    张金成,张东清,张新军.元坝地区超深井钻井提速难点与技术对策[J].石油钻探技术,2011,39(6):6-10. Zhang Jincheng,Zhang Dongqing,Zhang Xinjun.Difficulties of improving rate of penetration and its technical solutions in Yuanba Area[J].Petroleum Drilling Techniques,2011,39(6):6-10.
    [3]
    肖新磊.空气钻井技术在元坝地区的应用[J].石油钻探技术,2010,38(4):35-37. Xiao Xinlei.Application of air drilling technique in Yuanba Area[J].Petroleum Drilling Techniques,2010,38(4):35-37.
    [4]
    王兴武.塔里木超深井深部井斜控制技术[J].断块油气田,2011,18(1):100-102. Wang Xingwu.Hole deviation control technology for deep interval of ultra-deep wells in Tarim Basin[J].Fault-Block Oil Gas Field,2011,18(1):100-102.
    [5]
    罗飞,王希勇,廖忠会.涡轮钻具在川西深井段的应用分析[J].断块油气田,2008,15(6):94-96. Luo Fei,Wang Xiyong,Liao Zhonghui.Application of turbine drill in deep hole section of West Sichuan[J].Fault-Block Oil and Gas Field,2008,15(6):94-96.
    [6]
    高航献,瞿佳,曾鹏珲.元坝地区钻井提速探索与实践[J].石油钻探技术,2010,38(4):26-29. Gao Hangxian,Qu Jia,Zeng Penghui.Research and practice to improve drilling speed in Yuanba Area[J].Petroleum Drilling Tecniques,2010,38(4):26-19.
    [7]
    董明键.元坝124井超深井钻井提速配套技术[J].石油钻探技术,2011,39(6):23-26. Dong Mingjian.Technology to increase drilling speed used in ultradeep Well Yuanba 124[J].Petroleum Drilling Techniques,2011,39(6):23-26.
    [8]
    闫光庆,张金成.中国石化超深井钻井技术现状与发展建议[J].石油钻探技术,2013,41(2):1-6. Yan Guangqing,Zhang Jincheng.Status and proposal of the sinopec ultra-deep drilling technology[J].Petroleum Drilling Techniques,2013,41(2):1-6.
    [10]
    解兰宏,张金成,张东清,等.涡轮钻井技术在元坝等重点区块的应用[J].石油钻探技术,2011,39(6):15-18. Xie Lanhong,Zhang Jincheng,Zhang Dongqing,et al.The application of turbo drilling technology in Yuanba key area[J].Petroleum Drilling Techniques,2011,39(6):15-18.
    [11]
    周延军,陈明,于承朋.元坝区块提高钻井速度技术方案探析[J].探矿工程:岩土钻掘工程,2010,37(5):1-4. Zhou Yanjun,Chen Ming,Yu Chengpeng.Discussion on drilling technology for increasing ROP in Yuanba Block[J].Exploration Engineering:Rock Soil Drilling and Tunneling,2010,37(5):1-4.
    [12]
    董明键,肖新磊,边培明.复合钻井技术在元坝地区陆相地层中的应用[J].石油钻探技术,2010,38(4):38-40. Dong Mingjian,Xiao Xinlei,Bian Peiming.Application of compound drilling technology in terrestrial formationin Yuanba Area[J].Petroleum Drilling Techniques,2010,38(4):38-40.
    • Related Articles

  • Related Articles

    [1]XIA Hongquan, HU Hui, YANG Lin, ZHAO Jing. Meathod about Improving Accuracy of Fracture Fluid Friction Pressure[J]. Petroleum Drilling Techniques, 2017, 45(5): 113-117. DOI: 10.11911/syztjs.201705020
    [2]WEN Guo, JIANG Wenxue, ZHENG Weishi. Water Plugging and Fracturing Technology for Tight and Bottom-Water Gas Reservoir in the Sulige Gas Field[J]. Petroleum Drilling Techniques, 2017, 45(4): 97-102. DOI: 10.11911/syztjs.201704017
    [3]LIU Xuli. The Application of Downhole Microseismic Monitoring Technology in Shale Gas “Well Factory” Hydraulic Fracturing[J]. Petroleum Drilling Techniques, 2016, 44(4): 102-107. DOI: 10.11911/syztjs.201604018
    [4]GAO Yingyun. Fracturing Technology for a V-Shaped Horizontal Well Cluster in the Yanchuannan CBM Field[J]. Petroleum Drilling Techniques, 2016, 44(3): 83-87. DOI: 10.11911/syztjs.201603015
    [5]Wang Weijia, Xiong Jiangyong, Zhang Guofeng, Zhao Ming, Shang Qiong. Auxiliary Fracturing and Testing of Gas in Shale Gas Well with Coiled Tubing[J]. Petroleum Drilling Techniques, 2015, 43(5): 88-93. DOI: 10.11911/syztjs.201505015
    [6]He Tao, Guo Jianchun, Lu Cong, Jing Yuquan. Optimization of Shut-in Time between the First and Second Fracturing by means of Pressure Decline Analysis[J]. Petroleum Drilling Techniques, 2015, 43(2): 110-115. DOI: 10.11911/syztjs.201502019
    [7]Liu Yu, Ai Chi. Opening of Natural Fractures under Induced Stress in Multi-Stage Fracturing[J]. Petroleum Drilling Techniques, 2015, 43(1): 20-26. DOI: 10.11911/syztjs.201501004
    [8]Zhou Chengxiang, Zhou Yucang, Li Shuangming, Hu Yuanyuan. Fracturing Pressure Reducing Technique for Shale Gas Well in the Southeastern Sichuan[J]. Petroleum Drilling Techniques, 2014, 42(4): 42-47. DOI: 10.3969/j.issn.1001-0890.2014.04.008
    [9]Da Yinpeng, Bu Xiangqian, Yao Xiaoxiang, Zhang Kuangsheng, Li Zhiwen. Experimental Study on Plugging Fracturing Technology for Water-Flooded Well in Low-Permeability Reservoir[J]. Petroleum Drilling Techniques, 2013, 41(1): 82-86. DOI: 10.3969/j.issn.1001-0890.2013.01.016
    [10]Zeng Fanhui, Yin Jian, Guo Jianchun. Optimization of Perforation Orientation for Directional Well Fracturing[J]. Petroleum Drilling Techniques, 2012, 40(6): 74-78. DOI: 10.3969/j.issn.1001-0890.2012.06.016

  • Cited by

    Periodical cited type(14)

    1. 魏建平，蔡玉波，刘勇，余大炀，黄逸，李兴，高梦雅. 非刀具破岩理论与技术研究进展与趋势. 煤炭学报. 2024(02): 801-832 .
    2. 白冰，陈勉，金衍. 超临界CO_2渗流的流-固-热多场耦合机理研究. 中国科学:物理学 力学 天文学. 2023(02): 101-113 .
    3. 白冰，陈勉，金衍. 超临界CO_2吸附效应对页岩地层井壁稳定影响研究. 岩石力学与工程学报. 2023(S1): 3508-3518 .
    4. 黄程，霍丽如，吴辰泓. 基于非常规油气开发的CO_2资源化利用技术进展及前景. 非常规油气. 2022(01): 1-9 .
    5. 孙晓，王海柱，李英杰，郑永，陆群. 超临界CO_2水平环空携砂试验研究. 石油钻探技术. 2022(03): 17-23 . 本站查看
    6. 李木坤，王刚，程卫民，浦仕杰，倪红坚，时贤. 超临界二氧化碳射流破岩的热流固耦合机理. 石油勘探与开发. 2021(06): 1258-1268 .
    7. 乔兰，郝家旺，李占金，邓乃夫，李庆文. 基于微波加热技术的硬岩破裂方法探究. 煤炭学报. 2021(S1): 241-252 .
    8. LI Mukun，WANG Gang，CHENG Weimin，PU Shijie，NI Hongjian，SHI Xian. Heat-fluid-solid coupling mechanism of supercritical carbon dioxide jet in rock-breaking. Petroleum Exploration and Development. 2021(06): 1450-1461 .
    9. 杨晓峰，黄彦如，庞勇. 超临界二氧化碳射流火星采样技术研究. 航天器工程. 2020(02): 102-108 .
    10. 白鑫，张东明，王艳，王登科，蒋志刚，王小兵. 液态CO_2相变射流压力变化及其煤岩致裂规律. 中国矿业大学学报. 2020(04): 661-670 .
    11. 熊钰，莫军，李佩斯，蒋军，张烈辉. 致密气藏储层干化剂在超临界CO_2中的溶解性及增溶研究. 化学研究与应用. 2019(01): 72-78 .
    12. 罗攀登，李涵宇，翟立军，李春月，吕欣润，牟建业. 塔河油田超临界CO_2压裂井筒与裂缝温度场. 断块油气田. 2019(02): 225-230 .
    13. 王香增，郑永，吴金桥. 超临界CO_2射流特性数值模拟研究. 石油机械. 2019(09): 90-97 .
    14. 王毅博，王熙，柳愿. 超临界二氧化碳在非常规油气藏开采中的应用研究. 化工技术与开发. 2018(11): 29-32 .

    Other cited types(9)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (3525) PDF downloads (3323) Cited by(23)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return