Volume 43 Issue 3
May  2015
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Li Menggang, Zhang Huawei, Niu Chengcheng. Casing Program Optimization and Application in Complex Formation of the YD Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(3): 13-17. DOI: 10.11911/syztjs.201503003
Citation: Li Menggang, Zhang Huawei, Niu Chengcheng. Casing Program Optimization and Application in Complex Formation of the YD Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(3): 13-17. DOI: 10.11911/syztjs.201503003
shu

Casing Program Optimization and Application in Complex Formation of the YD Oilfield

  • Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China

More Information
  • Received Date: February 11, 2015
  • Revised Date: April 21, 2015
    Graphical Abstract
    • Abstract
  • In the YD Oilfield, the complex geologic environment, coexistence of multiple pressure systems and high pressure asphalt formation that easy overflow or lost circulation have been the challenge to drilling and optimization of casing program. By analyzing drilling data, determing the setting depth of casing, reviewing pore pressure of Gachsaran Formation, together with the bottom-up designing method, three exclusive casing programs for drilling complex formations in the YD Oilfield were determined.Due to abnormal high pressure existed in parts of Gachsaran salt water formation, a special casing program was developed for dealing with it. But for the normal-pressure Gachsaran Formation, a simplified and efficient casing program was also developed to improve ROP and lower the drilling cost.As for the high-pressure Kazhdumi asphalt formation, two casing programs were developed with prolonged 244.5 mm intermediate casing for special drilling and isolating Kazhdumi Formation. The optimized casing programs were satisfactorily applied in more than 20 development wells in the YD Oilfield. The casing program for high-pressure salt water formation achieved safe drilling in some Gachsaran Formation. The conventional casing program highly enhanced the ROP and shortened the drilling cycle. The casing programs for the asphalt formation fully ensured the drilling safety in high-pressure asphalt formation. These optimized casing programs have laid a good foundation for Phase Ⅱ development of the YD Oilfield, and will provide the reference for similar carbonate reservoir development at home and abroad.
    • FullText(HTML)
    • References (16)
  • [1]
    鲍洪志,杨顺辉,侯立中,等.伊朗Y油田F地层防卡技术[J].石油钻探技术,2013,41(3):67-72. Bao Hongzhi,Yang Shunhui,Hou Lizhong,et al.Pipe sticking prevention measures in F Formation of Iranian Y Oilfield[J].Petroleum Drilling Techniques,2013,41(3):67-72.
    [2]
    侯立中.伊朗雅达油田优快钻井技术[J].石油钻采工艺,2014,36(4):13-17. Hou Lizhong.Optimized fast drilling technology for Yadavaran Oilfield of Iran[J].Oil Drilling Production Technology,2014,36(4):13-17.
    [3]
    王治法,肖超,侯立中,等.伊朗雅达油田复杂地层钻井液技术[J].钻井液与完井液,2012,29(5):40-43. Wang Zhifa,Xiao Chao,Hou Lizhong,et al.Drilling fluid technology for troublesome formation in Yadavaran Oilfield of Iran[J].Drilling Fluid Completion Fluid,2012,29(5):40-43.
    [4]
    侯喜茹,柳贡慧,仲文旭.井身结构设计必封点综合确定方法[J].石油大学学报:自然科学版,2005,29(4):19-22. Hou Xiru,Liu Gonghui,Zhong Wenxu.Comprehensive determination method of setting position for casing program design[J].Journal of the University of Petroleum,China:Edition of Natural Science,2005,29(4):19-22.
    [5]
    刘彪,白彬珍,潘丽娟,等.托甫台区块含盐膏层深井井身结构优化设计[J].石油钻探技术,2014,42(4):48-52. Liu Biao,Bai Binzhen,Pan Lijuan,et al.Casing program of deep well with evaporite bed in Tuofutai Block[J].Petroleum Drilling Techniques,2014,42(4):48-52.
    [6]
    管志川,李春山,周广陈,等.深井和超深井钻井井身结构设计方法[J].石油大学学报:自然科学版,2001,25(6):42-44. Guan Zhichuan,Li Chunshan,Zhou Guangchen,et al.A method for designing casing program in deep and superdeep wells[J].Journal of the University of Petroleum,China:Edition of Natural Science,2001,25(6):42-44.
    [7]
    唐志军.川东北河坝区块井身结构的优化与实践[J].石油钻探技术,2011,39(1):73-77. Tang Zhijun.Casing optimization and practice at Heba Block of Northeastern Sichuan Basin[J].Petroleum Drilling Techniques,2011,39(1):73-77.
    [8]
    杨兰田,王西江.巴麦地区外围井井身结构优化方案分析[J].中外能源,2012,17(2):64-68. Yang Lantian,Wang Xijiang.Analysis on optimized project of well construction of perimeter wells in Ba-Mai Area[J].Sino-Global Energy,2012,17(2):64-68.
    [9]
    曾勇,郑双进,刘存鹏,等.井身结构优化设计研究[J].长江大学学报:自然科学版,2011,8(9):60-62. Zeng Yong,Zheng Shuangjin,Liu Cunpeng,et al.Study of casing program optimized design[J]. Journal of Yangtze University:Natural Science Edition,2011,8(9):60-62.
    [10]
    杨玉坤.川东北地区深井井身结构优化设计[J].石油钻探技术,2008,36(3):33-36. Yang Yukun.Deep well casing structure optimization in Northeast Sichuan Area[J].Petroleum Drilling Techniques,2008,36(3):33-36.
    [11]
    葛鹏飞,马庆涛,张栋.元坝地区超深井井身结构优化及应用[J].石油钻探技术,2013,41(4):83-86. Ge Pengfei,Ma Qingtao,Zhang Dong.Optimization and application of ultra-deep well casing program in Yuanba Area[J].Petroleum Drilling Techniques,2013,41(4):83-86.
    [12]
    苏勤,侯绪田.窄安全密度窗口条件下钻井设计技术探讨[J].石油钻探技术,2011,39(3):62-65. Su Qin,Hou Xutian.Research on drilling design techniques for narrow mud weight window[J].Petroleum Drilling Techniques,2011,39(3):62-65.
    [13]
    何青水,宋明全,肖超,等.非均质超厚活跃沥青层安全钻井技术探讨[J].石油钻探技术,2013,41(1):20-24. He Qingshui,Song Mingquan,Xiao Chao,et al.Discussion on safe drilling technology for heterogeneous,ultra-thick and active bitumen zone[J].Petroleum Drilling Techniques,2013,41(1):20-24.
    [14]
    金军斌,杨顺辉,张洪宝,等.钻井液用沥青质稠油硬化剂的研究与应用[J].石油钻探技术,2014,42(1):50-54. Jin Junbin,Yang Shunhui,Zhang Hongbao,et al.Development and application of a hardening agent for asphaltic heavy oil in drilling fluid[J].Petroleum Drilling Techniques,2014,42(1):50-54.
    [15]
    钱坤,杨胜来,刘盼.原油沥青质初始沉淀压力测定与模型化计算[J].断块油气田,2014,21(6):775-778. Qian Kun,Yang Shenglai,Liu Pan.Measurement and modeling calculation of asphaltene onset precipitation pressure[J].Fault-Block Oil and Gas Field,2014,21(6):775-778.
    [16]
    侯立中,何青水,何汉平,等.控压钻井技术在伊朗雅达油田S03井的应用[J].科学技术与工程,2014,14(18):204-208. Hou Lizhong,He Qingshui,He Hanping,et al.Managed pressure drilling technique applied in Well S03 of Yada Oilfield,Iran[J].Science Technology and Engineering,2014,14(18):204-208.
    • Related Articles

  • Related Articles

    [1]LI Shuanggui, LUO Jiang, YU Yang, TANG Ming, YI Hao, ZENG Dezhi. Establishing Pressure Profiles and Casing Program Optimization in the Southern Shunbei No. 5 Fault Zone[J]. Petroleum Drilling Techniques, 2023, 51(1): 9-15. DOI: 10.11911/syztjs.2022037
    [2]SHI Yuanpeng, CHENG Xiaodong, JIANG Wei, LI Linbo, HE Chunming, CAI Bo. High Efficiency Stimulation Technology for Different Sedimentary Formations in the Erlian Basin[J]. Petroleum Drilling Techniques, 2018, 46(3): 103-108. DOI: 10.11911/syztjs.2018061
    [3]Zhang Huawei, Guo Jinghua, Pang Xiaowang, Zhao Xiangyang, Zhao Guoquan. Managed Pressure Drilling Technique in the Well Y26ST of YD Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(3): 35-40. DOI: 10.11911/syztjs.201503007
    [4]Wei Dianju, Jin Junbin, He Qingshui. Fluid Technology for Drilling Horizontal Wells in the High Permeability Carbonate Reservoir of the YD Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(3): 23-28. DOI: 10.11911/syztjs.201503005
    [5]Jiang Zhao, Guo Jinghua, Wang Zijin, Huang Zaifu, Wang Xuejie. Discussion on Safe Drilling Technologies for the Asphalt Layer in the YD Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(3): 7-12. DOI: 10.11911/syztjs.201503002
    [6]JinJunbin, He Qingshui, Tang Wenquan, Zheng Chenyu. Contamination Control Technique for Safe Drilling in Ultra-Thick Asphalt Layers in Y Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(1): 63-68. DOI: 10.11911/syztjs.201501011
    [7]Zhang Haishan, Yang Jin, Gong Jize, Ge Junrui. Optimization of Casing Program for HTHP Deep Exploratory Wells in Block Xihu of East China Sea[J]. Petroleum Drilling Techniques, 2014, 42(6): 25-29. DOI: 10.11911/syztjs.201406005
    [8]Liu Biao, Bai Binzhen, Pan Lijuan, Niu Lixia, Fan Yanfang. Casing Program of Deep Well with Evaporite Bed in Tuofutai Block[J]. Petroleum Drilling Techniques, 2014, 42(4): 48-52. DOI: 10.3969/j.issn.1001-0890.2014.04.009
    [9]Jin Junbin, Yang Shunhui, Zhang Hongbao, Ren Liwei, Song Zhaohui. Development and Application of A Hardening Agent for Asphaltic Heavy Oil in Drilling Fluid[J]. Petroleum Drilling Techniques, 2014, 42(1): 50-54. DOI: 10.3969/j.issn.1001-0890.2014.01.010
    [10]Gu Guangping, Zhou Yongjian, Zhuo Yun, Wang Chonghua, Lan Taihua, Zeng Qingxu. High-Pressure Jet Drilling Technology in Jurassic Formation in Eastern Sichuan[J]. Petroleum Drilling Techniques, 2012, 40(2): 51-54. DOI: 10.3969/j.issn.1001-0890.2012.02.010

  • Cited by

    Periodical cited type(1)

    1. 陈小刚, 杨杰. 老君庙油田复杂地层井眼优化高效钻井技术研究与应用. 化工管理. 2019(19): 218-219 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (3530) PDF downloads (3929) Cited by(1)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return