Key Technologies for Casing Running with Double Floating Collars in Middle and Deep Horizontal Wells

ZHANG Xinliang; JIN Lei; ZHANG Rui; ZHANG Guanlin; FENG Liying

doi:10.11911/syztjs.2023053

Volume 51 Issue 6

Nov. 2023

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2023 > 51(6): 57-63. > DOI: 10.11911/syztjs.2023053

ZHANG Xinliang, JIN Lei, ZHANG Rui, et al. Key technologies for casing running with double floating collars in middle and deep horizontal wells [J]. Petroleum Drilling Techniques，2023, 51(6)：57-63. DOI: 10.11911/syztjs.2023053

Citation:

PDF (2029 KB)

Key Technologies for Casing Running with Double Floating Collars in Middle and Deep Horizontal Wells

Sinopec Research Institute of Petroleum Engineering Co., Ltd., Beijing, 102206, China

More Information

Received Date: April 11, 2022
Revised Date: August 08, 2023
Available Online: August 24, 2023

Graphical Abstract

Abstract

Abstract

There are problems of excessive drag and restriction while running production casing into medium and deep horizontal wells. In addition, the conventional floating collar has a complex structure and complicated running procedure, and multiple floating collars in series have high risk. In order to improve floating collars' performance, reliability, and the pipe string trafficability of casing running, the immediate rupturing disc floating collar and eccentric self-rotating pressure bearing float shoes were developed, and key tools such as integral non-weld centralizer and elastic floating collar were selected. The determination method for drag coefficient and position of drag floating collar was established, and the technical procedure of casing running with floating collar were created, forming the key technologies for casing running with double floating collars suitable for middle and deep horizontal wells. The technologies have been successfully applied in nine horizontal wells in Zhongjiang Gas Field, and the casing was safely run to the designed depth. The maximum liquid column pressure bearing of the floating collar is 62.5 MPa, and the maximum floating length is 1811 m. The results of research and field application show that the casing running technologies with double floating collars can solve the problem of difficult casing running in middle and deep horizontal wells and provides a new technical method for casing running in middle and deep horizontal wells.
- floating collar,
- floating shoe,
- casing centralizer,
- drag coefficient,
- casing running,
- horizontal well

FullText(HTML)

References (22)

References

[1]	姜政华,孙钢,陈士奎,等. 南川页岩气田超长水平段水平井钻井关键技术[J]. 石油钻探技术,2022,50(5):20–26. doi: 10.11911/syztjs.2022045 JIANG Zhenghua, SUN Gang, CHEN Shikui, et al. Key drilling technologies for horizontal wells with ultra-long horizontal sections in Nanchuan Shale Gas Field [J]. Petroleum Drilling Techniques, 2022, 50(5): 20–26. doi: 10.11911/syztjs.2022045
[2]	光新军,叶海超,蒋海军. 北美页岩油气长水平段水平井钻井实践与启示[J]. 石油钻采工艺,2021,43(1):1–6. doi: 10.13639/j.odpt.2021.01.001 GUANG Xinjun, YE Haichao, JIANG Haijun. Drilling practice of shale oil & gas horizontal wells with long horizontal section in the North America and its enlightenment[J]. Oil Drilling & Production Technology, 2021, 43(1): 1–6. doi: 10.13639/j.odpt.2021.01.001
[3]	唐洪林,唐志军,闫振来,等. 金平1井浅层长水平段水平井钻井技术[J]. 石油钻采工艺,2008,30(6):11–15. TANG Honglin, TANG Zhijun, YAN Zhenlai, et al. Drilling tech-niques of shallow long horizontal-section well of Jinping 1 Well[J]. Oil Drilling & Production Technology, 2008, 30(6): 11–15.
[4]	袁光杰,付利,王元,等. 我国非常规油气经济有效开发钻井完井技术现状与发展建议[J]. 石油钻探技术,2022,50(1):1–12. doi: 10.11911/syztjs.2022002 YUAN Guangjie, FU Li, WANG Yuan, et al. The up-to-date drilling and completion technologies for economic and effective development of unconventional oil & gas and suggestions for further improvements[J]. Petroleum Drilling Techniques, 2022, 50(1): 1–12. doi: 10.11911/syztjs.2022002
[5]	王耀稼. 大位移井漂浮下套管技术优化设计及软件开发[D]. 西安: 西安石油大学, 2017. WANG Yaojia. Optimization design and software development of casing floating technology in extended reach wells[D]. Xi’an: Xi’an Shiyou University, 2017.
[6]	邓红琳,王锦昌. 超浅层大位移水平井钻完井技术[J]. 特种油气藏,2014,21(3):142–144. DENG Honglin, WANG Jinchang. Extended reach horizontal drilling and completion technology in ultra-shallow formation[J]. Special Oil & Gas Reservoirs, 2014, 21(3): 142–144.
[7]	赵毅,曹晓,赵倩,等. 延长油田大位移水平井漂浮下套管技术优化分析[J]. 石油化工应用,2017,36(1):97–101. doi: 10.3969/j.issn.1673-5285.2017.01.027 ZHAO Yi, CAO Xiao, ZHAO Qian, et al. Floating casing running technology optimization analysis of large extended reach horizontal well in Yanchang Oilfield[J]. Petrochemical Industry Application, 2017, 36(1): 97–101. doi: 10.3969/j.issn.1673-5285.2017.01.027
[8]	曲永哲. 水平井套管安全下入理论研究[D]. 成都: 西南石油大学, 2009. QU Yongzhe. Study on the theory of casing running of horizontal well safely[D]. Chengdu: Southwest PetroleumUniversity, 2009.
[9]	张明昌,张新亮,高剑玮. 新型 XPJQ 系列下套管漂浮减阻器的研制与试验[J]. 石油钻探技术,2014,42(5):114–118. ZHANG Mingchang, ZHANG Xinliang, GAO Jianwei. Developing and testing XPJQ series floating friction reducers for running casing[J]. Petroleum Drilling Techniques, 2014, 42(5): 114–118.
[10]	陈保山,程智远,徐敏,等. 新型ϕ139.7 mm漂浮接箍的研制与应用[J]. 石油机械,2016,44(11):29–32. CHEN Baoshan, CHENG Zhiyuan, XU Min, et al. The development and application of novel ϕ139.7 mm casing floating tool[J]. China Petroleum Machinery, 2016, 44(11): 29–32.
[11]	李维,李黔. 大位移水平井下套管漂浮接箍安放位置优化分析[J]. 石油钻探技术,2009,37(3):53–56. LI Wei, LI Qian. Optimization of float collar position in extended reach wells[J]. Petroleum Drilling Techniques, 2009, 37(3): 53–56.
[12]	石崇东,杨碧学,何辉,等. 苏5-15-17AH 井超3 000 m水平段的钻井技术[J]. 天然气工业,2013,33(8):70–76. SHI Chongdong, YANG Bixue, HE Hui, et al. Drilling techniquesfor an ultra-long horizontal interval ( >3 000 m) in Well Su 5-15-17AH in the Sulige Gas Field, Ordos Basin[J]. Natural Gas Industry, 2013, 33(8): 70–76.
[13]	郭超. 中江-高庙子气田水平井钻井工艺技术应用研究[D]. 成都: 西南石油大学, 2018. GUO Chao. Research on the application of horizontal well drilling technology in Gaomiaozi Gas Field in Zhongjiang[D]. Chengdu: Southwest Petroleum University, 2018.
[14]	甘新星,董仲林,马吉龙,等. 南川页岩气田超长水平段水平井高效下套管技术[J]. 断块油气田,2023,30(5):874–878. doi: 10.6056/dkyqt202305021 GAN Xinxing, DONG Zhonglin, MA Jilong, et al. Efficient casing running technology for horizontal wells with ultra-long horizontal sections in Nanchuan Shale Gas Field[J]. Fault-Block Oil & Gas Field, 2023, 30(5): 874–878. doi: 10.6056/dkyqt202305021
[15]	张强,秦世利,饶志华,等. 南海超大水垂比大位移M井钻井关键技术[J]. 石油钻探技术,2021,49(5):19–25. doi: 10.11911/syztjs.2021045 ZHANG Qiang, QIN Shili, RAO Zhihua, et al. Key drilling technologies in extended-reach well M with ultra-high HD/VD ratio in the South China Sea[J]. Petroleum Drilling Techniques, 2021, 49(5): 19–25. doi: 10.11911/syztjs.2021045
[16]	马振锋,于小龙,杨全枝,等. 陆相页岩气水平井钻井提速技术[J]. 非常规油气,2017,4(4):88–92. MA Zhenfeng, YU Xiaolong, YANG Quanzhi, et al. The technology of improving rate of penetration in continental shale gas horizontal well[J]. Unconventional Oil & Gas, 2017, 4(4): 88–92.
[17]	邵帅. 大庆油田致密油平台三维水平井钻柱摩阻分析[J]. 石油钻采工艺,2022,44(5):556–560. doi: 10.13639/j.odpt.2022.05.004 SHAO Shuai. Analysis of friction upon drill string for 3D horizontal wells ontight oil platform in Daqing Oilfield[J]. Oil Drilling & Production Technology, 2022, 44(5): 556–560. doi: 10.13639/j.odpt.2022.05.004
[18]	李伟峰,王艳,于小龙. Z88P4井双漂浮下套管技术研究与应用[J]. 非常规油气,2021,8(4):93–98. doi: 10.19901/j.fcgyq.2021.04.13 LI Weifeng, WANG Yan, YU Xiaolong. The study and application of double floating casing running technology in Z88P4[J]. Unconventional Oil & Gas, 2021, 8(4): 93–98. doi: 10.19901/j.fcgyq.2021.04.13
[19]	刘善祯. 大位移水平井下套管受力分析及漂浮接箍设计[D]. 青岛: 中国石油大学（华东）, 2007. LIU Shanzhen. Casing running force analysis and float coupling design for extended reach well [D]. Qingdao: China University of Petroleum(East China), 2007
[20]	黄召,何福耀,雷磊,等. 新型高效抗磨减阻剂在东海油气田的应用[J]. 钻井液与完井液,2017,34(4):49–54. doi: 10.3969/j.issn.1001-5620.2017.04.009 HUANG Zhao, HE Fuyao, LEI Lei, et al. Application of a new highly efficient anti-wear friction reducer in Donghai Oil and Gas Field[J]. Drilling Fluid & Completion Fluid, 2017, 34(4): 49–54. doi: 10.3969/j.issn.1001-5620.2017.04.009
[21]	杨国彬,杨华,吴萌,等. 浅层大位移三维水平井钻井技术在超重稠油油田的应用[J]. 钻采工艺,2016,39(1):26–29. YANG Guobin, YANG Hua, WU Meng, et al. Shallow large displacement three dimensional horizontal well drilling technology and application in heavy oil field[J]. Drilling & Production Technology, 2016, 39(1): 26–29.
[22]	张瑞,侯跃全,郭朝辉,等. 川西长裸眼水平井下尾管循环解阻关键技术[J]. 石油钻探技术,2020,48(3):52–57. doi: 10.11911/syztjs.2020040 ZHANG Rui, HOU Yuequan, GUO Zhaohui, et al. Key techniques for eliminating resistance while running liner with circulation in long horizontal openhole wells in the Western Sichuan[J]. Petroleum Drilling Technology, 2020, 48(3): 52–57. doi: 10.11911/syztjs.2020040

[1]	SHU Bozhao, ZHAO Wenlong, WANG Hang, HUANG Yongzhi, ZHANG Zhi, ZHU Xiaohua. The Optimization of Casing Thread Types for Horizontal Tight Oil Wells in Mahu Oilfield, Xinjiang[J]. Petroleum Drilling Techniques, 2021, 49(5): 51-56. DOI: 10.11911/syztjs.2021041
[2]	YANG Tongyu, WEI Liao, FENG Liying, MA Lanrong, ZHU Yujie. Design and Test of Key Tools in Horizontal Well Toe-End Fracturing[J]. Petroleum Drilling Techniques, 2018, 46(4): 54-58. DOI: 10.11911/syztjs.2018123
[3]	Wang Yang, Zhao Bing, Yuan Qingyun, Zeng Cheng. Integrated Techniques in Tight Reservoir Development for Horizontal Wells in Block Shun 9[J]. Petroleum Drilling Techniques, 2015, 43(4): 48-52. DOI: 10.11911/syztjs.201504009
[4]	Zhang Mingchang, Zhang Xinliang, Gao Jianwei. Developing and Testing XPJQ Series Floating Friction Reducers for Running Casing[J]. Petroleum Drilling Techniques, 2014, 42(5): 114-118. DOI: 10.11911/syztjs.201405021
[5]	He Qing, Li Guofeng, Chen Zuo, Li Yueli, Liu Shihua. Study and Test of Horizontal Well Cluster Fracturing Technology[J]. Petroleum Drilling Techniques, 2014, 42(4): 79-85. DOI: 10.3969/j.issn.1001-0890.2014.04.015
[6]	Han Laiju, Niu Hongbo. Understandings on Drilling Technology for Long Horizontal Section Wells[J]. Petroleum Drilling Techniques, 2014, 42(2): 7-11. DOI: 10.3969/j.issn.1001-0890.2014.02.002
[7]	Chen Linlin, Wang Yongji, Li Ruiying. Design and Drilling of Horizontal Well Yuanping 1 with Long Lateral Section[J]. Petroleum Drilling Techniques, 2013, 41(6): 115-119. DOI: 10.3969/j.issn.1001-0890.2013.06.023
[8]	Chen Shu, Zhang Wenhua, Wang Lei, Li Wanjun, Yang Guobin. Casing Running Technology for High Horizontal-Displacement to Vertical-Depth Ratio 3D Shallow Layer Horizontal Well in Venezuela[J]. Petroleum Drilling Techniques, 2013, 41(1): 56-60. DOI: 10.3969/j.issn.1001-0890.2013.01.011
[9]	Yin Jian, Guo Jianchun, Zeng Fanhui. Perforation Spacing Optimization for Staged Fracturing of Horizontal Well[J]. Petroleum Drilling Techniques, 2012, 40(5): 67-71. DOI: 10.3969/j.issn.1001-0890.2012.05.015
[10]	Liu Bing, Xu Xingping, Li Jizhi. Application of SQP Algorithm to Optimize Perforation in Horizontal Wells[J]. Petroleum Drilling Techniques, 2012, 40(3): 97-101. DOI: 10.3969/j.issn.1001-0890.2012.03.020

Cited By

Cited by

Periodical cited type(1)

李高刚，魏祥高，汪孝贵，唐健，芦宏斌，马兰波，张亥先，杨海斌. 苏里格气田长水平段水平井钻井关键技术——以S77-35-H5井为例. 天然气技术与经济. 2024(02): 8-13 .

Other cited types(0)

Get Citation

PDF

XML

Article Metrics

Article views (412) PDF downloads (116) Cited by(1)

Key Technologies for Casing Running with Double Floating Collars in Middle and Deep Horizontal Wells

Abstract

References

Related Articles

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Article Metrics

Related

Key Technologies for Casing Running with Double Floating Collars in Middle and Deep Horizontal Wells

Abstract

References

Related Articles

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content