YUAN Jianwei, LIU Meijia, LI Chao, et al. Research of boundary correction coefficient of horizontal wells in narrow channel reservoirs [J]. Petroleum Drilling Techniques,2023, 51(1):86-90. DOI: 10.11911/syztjs.2022056
Citation: YUAN Jianwei, LIU Meijia, LI Chao, et al. Research of boundary correction coefficient of horizontal wells in narrow channel reservoirs [J]. Petroleum Drilling Techniques,2023, 51(1):86-90. DOI: 10.11911/syztjs.2022056

Research on Boundary Correction Coefficient of Horizontal Wells in Narrow Channel Reservoirs

More Information
  • Received Date: December 14, 2021
  • Revised Date: November 04, 2022
  • Available Online: December 27, 2022
  • In this paper, the boundary correction coefficient was introduced to characterize the influence of channel widths on the productivity of horizontal wells. In this way, the large evaluation results caused by the short duration of the drill-stem testing (DST) can be avoided, and the productivity of horizontal wells in narrow channel reservoirs can be accurately evaluated. A model for the horizontal well in narrow channel reservoirs was built and solved, and the variation curves of the boundary correction coefficient with testing time were obtained under different channel widths. The research results suggest that a narrower channel is accompanied by a smaller boundary correction coefficient, and hence, the impact of channel widths on the productivity of horizontal wells cannot be neglected. The method was applied to predict the specific productivity index of Well P1H and Well P7H, two horizontal wells in Bohai X Oilfield, and the relative error between predicted results and actual results was less than 5.4%. This indicates that the introduction of the boundary correction coefficient can significantly raise the productivity evaluation accuracy of ho-rizontal wells in narrow channel reservoirs. This method can provide a theoretical basis for predicting the productivity of horizontal wells in similar narrow channel reservoirs and guide the reasonable proration of oil reservoirs.

  • [1]
    CORBETT P, ZHENG Shiyi, PINISETTI M, et al. The integration of geology and well testing for improved fluvial reservoir characterisation[R]. SPE 48880, 1998.
    [2]
    WALSH J L, GRINGARTEN A C. Catalogue of well test responses in a fluvial reservoir system[R]. SPE 180181, 2016.
    [3]
    陈薪凯,陈程,汪虎. 渤海湾盆地秦皇岛32-X油田决口扇储层的沉积特征与区分标准[J]. 特种油气藏,2020,27(5):22–29. doi: 10.3969/j.issn.1006-6535.2020.05.004

    CHEN Xinkai, CHEN Cheng, WANG Hu. Sedimentary characteristics and distinguishing criteria of crevasse splay reservoir in QHD 32-X Oilfield, Bohai Bay Basin[J]. Special Oil & Gas Reservoirs, 2020, 27(5): 22–29. doi: 10.3969/j.issn.1006-6535.2020.05.004
    [4]
    呙义,高晓飞,易会安,等. 海上油田全寿命控水完井技术研究及现场试验[J]. 石油钻探技术,2021,49(6):93–98. doi: 10.11911/syztjs.2021120

    GUO Yi, GAO Xiaofei, YI Huian, et al. Research and field test on life-long water control completion technology in offshore oil-fields[J]. Petroleum Drilling Techniques, 2021, 49(6): 93–98. doi: 10.11911/syztjs.2021120
    [5]
    汪益宁,李洪,曹淑慧,等. 各向异性底水油藏长水平井产能公式[J]. 油气地质与采收率,2016,23(4):108–111. doi: 10.3969/j.issn.1009-9603.2016.04.017

    WANG Yining, LI Hong, CAO Shuhui, et al. Productivity formula of long horizontal well in anisotropic bottom-water reservoir[J]. Petroleum Geology and Recovery Efficiency, 2016, 23(4): 108–111. doi: 10.3969/j.issn.1009-9603.2016.04.017
    [6]
    胡平,卞德智,范子菲,等. 底水油藏水平井水淹动态的数值模拟研究[J]. 科学技术与工程,2017,17(31):60–65. doi: 10.3969/j.issn.1671-1815.2017.31.010

    HU Ping, BIAN Dezhi, FAN Zifei, et al. A numerical simulation study on water flooding performance and pattern in horizontal well with bottom water reservoir[J]. Science Technology and Engineering, 2017, 17(31): 60–65. doi: 10.3969/j.issn.1671-1815.2017.31.010
    [7]
    邓森,贾忠伟,赵宇. 垂直断层附近水平井产能的计算[J]. 大庆石油地质与开发,2019,38(1):100–103.

    DENG Sen, JIA Zhongwei, ZHAO Yu. Calculation of the horizontal well productivity near the vertical fault[J]. Petroleum Geology & Oilfield Development in Daqing, 2019, 38(1): 100–103.
    [8]
    陈元千,郭二鹏,彭子璇,等. 各向异性断块油藏水平井产能公式的推导[J]. 石油学报,2017,38(12):1420–1424. doi: 10.7623/syxb201712009

    CHEN Yuanqian, GUO Erpeng, PENG Zixuan, et al. Derivation of productivity formulas for horizontal wells in anisotropic fault-block reservoirs[J]. Acta Petrolei Sinica, 2017, 38(12): 1420–1424. doi: 10.7623/syxb201712009
    [9]
    李江,陈先超,高平,等. 考虑应力敏感效应的裂缝性碳酸盐岩气井拟稳态产能预测方法[J]. 石油钻探技术,2021,49(3):111–116. doi: 10.11911/syztjs.2021032

    LI Jiang, CHEN Xianchao, GAO Ping, et al. A pseudo-steady-state productivity prediction method for fractured carbonate gas wells considering stress-sensitivity effects[J]. Petroleum Drilling Techniques, 2021, 49(3): 111–116. doi: 10.11911/syztjs.2021032
    [10]
    郭肖,翟雨阳. 存在供给边界油藏水平井产能分析[J]. 西南石油学院学报,2001,23(6):34–37.

    GUO Xiao, ZHAI Yuyang. A study of horizontal well productivity in reservoirs with top and bottom drainage boundaries[J]. Journal of Southwest Petroleum Institute, 2001, 23(6): 34–37.
    [11]
    王清辉,朱明,冯进,等. 基于渗透率合成技术的砂岩油藏产能预测方法[J]. 石油钻探技术,2021,49(6):105–112. doi: 10.11911/syztjs.2021122

    WANG Qinghui, ZHU Ming, FENG Jin, et al. A method for predicting productivity of sandstone reservoirs based on permeability synthesis technology[J]. Petroleum Drilling Techniques, 2021, 49(6): 105–112. doi: 10.11911/syztjs.2021122
    [12]
    李波,罗宪波,刘英,等. 海上稠油油田合理单井产能预测新方法[J]. 中国海上油气,2008,20(4):243–245. doi: 10.3969/j.issn.1673-1506.2008.04.007

    LI Bo, LUO Xianbo, LIU Ying, et al. A new method to predict reasonable deliverability of individual wells in offshore heavy oil-fields[J]. China Offshore Oil and Gas, 2008, 20(4): 243–245. doi: 10.3969/j.issn.1673-1506.2008.04.007
    [13]
    蔡晖. 确定油井测试时间校正系数的新方法[J]. 中国海上油气,2010,22(6):391–393. doi: 10.3969/j.issn.1673-1506.2010.06.007

    CAI Hui. A new method to determine calibration coefficient for oil-well testing time[J]. China Offshore Oil and Gas, 2010, 22(6): 391–393. doi: 10.3969/j.issn.1673-1506.2010.06.007
    [14]
    何逸凡,胡勇,周海燕,等. 渤中25-1南油田窄河道型油藏中途测试产能评价[J]. 新疆石油地质,2016,37(2):204–207. doi: 10.7657/XJPG20160214

    HE Yifan, HU Yong, ZHOU Haiyan, et al. Evaluation of DST deliverability in narrow channel sand reservoir in BZ25-1s Oilfield, Bohai Sea[J]. Xinjiang Petroleum Geology, 2016, 37(2): 204–207. doi: 10.7657/XJPG20160214
    [15]
    刘斌,常涛,曲炳昌,等. 基于试井技术的DST测试产能校正方法[J]. 石油钻采工艺,2019,41(1):83–88.

    LIU Bin, CHANG Tao, QU Bingchang, et al. DST productivity correction method based on well test technique[J]. Oil Drilling & Production Technology, 2019, 41(1): 83–88.
    [16]
    石延辉,姚约东,李树军,等. 海上油田水平井产能校正系数计算方法[J]. 大庆石油地质与开发,2014,33(3):96–100. doi: 10.3969/J.ISSN.1000-3754.2014.03.020

    SHI Yanhui, YAO Yuedong, LI Shujun, et al. Calculating method of the productivity correcting coefficient for the horizontal wells on offshore oilfield[J]. Petroleum Geology & Oilfield Development in Daqing, 2014, 33(3): 96–100. doi: 10.3969/J.ISSN.1000-3754.2014.03.020
    [17]
    李娜. 水平井试井分析理论与方法[D]. 大庆: 大庆石油学院, 2009.

    LI Na. Theory and method of well test analysis in horizontal wells[D]. Daqing: Daqing Petroleum Institute, 2009.
    [18]
    王欢,计秉玉,廖新维,等. 致密油藏体积压裂水平井压力特征[J]. 断块油气田,2020,27(2):217–223.

    WANG Huan, JI Bingyu, LIAO Xinwei, et al. Pressure characteristics for volume-fractured horizontal well in tight oil reservoirs[J]. Fault-Block Oil & Gas Field, 2020, 27(2): 217–223.
    [19]
    何吉祥,徐有杰,高阳,等. 裂缝性致密油藏多级压裂水平井试井模型[J]. 断块油气田,2021,28(2):241–246.

    HE Jixiang, XU Youjie, GAO Yang, et al. Well test model of multi-stage fractured horizontal well in fractured tight reservoirs[J]. Fault-Block Oil & Gas Field, 2021, 28(2): 241–246.
    [20]
    李成勇,刘启国,张燃. 水平井压力动态点源解的计算方法研究[J]. 油气井测试,2004,13(6):4–6. doi: 10.3969/j.issn.1004-4388.2004.06.002

    LI Chengyong, LIU Qiguo, ZHANG Ran. A study for calculation of source function of pressure dynamic in horizontal well[J]. Well Testing, 2004, 13(6): 4–6. doi: 10.3969/j.issn.1004-4388.2004.06.002
    [21]
    吴向红,何伶,方宏长. 比采油指数曲线的分析和应用[J]. 石油勘探与开发,2007,34(6):745–749. doi: 10.3321/j.issn:1000-0747.2007.06.019

    WU Xianghong, HE Ling, FANG Hongchang. Analysis and application of specific productivity index[J]. Petroleum Exploration and Development, 2007, 34(6): 745–749. doi: 10.3321/j.issn:1000-0747.2007.06.019

Catalog

    Article Metrics

    Article views (195) PDF downloads (33) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return