TAN Tianyu, QIU Aimin, TANG Jihua, LI Hao, XI Jia’nan, HUO Lifen. Key Drilling Technologies for Ultra-Shallow Horizontal Wells in the Jihua-1 Block of Jilantai Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(6): 37-41. DOI: 10.11911/syztjs.2021038
Citation: TAN Tianyu, QIU Aimin, TANG Jihua, LI Hao, XI Jia’nan, HUO Lifen. Key Drilling Technologies for Ultra-Shallow Horizontal Wells in the Jihua-1 Block of Jilantai Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(6): 37-41. DOI: 10.11911/syztjs.2021038

Key Drilling Technologies for Ultra-Shallow Horizontal Wells in the Jihua-1 Block of Jilantai Oilfield

More Information
  • Received Date: August 31, 2020
  • Revised Date: February 20, 2021
  • Available Online: June 30, 2021
  • During the drilling of ultra-shallow horizontal wells in the Jihua-1 Block of Jilantai Oilfield, some problems were encountered due to the soft Cretaceous strata in the upper part and the high hardness, poor drillability and strong heterogeneity of the gneiss strata in the lower part. In these wells, the build up rate can not be guaranteed, the drilling cycle is long, the horizontal sections are difficult to extend in hard strata, and the later completion casings are hard to run safely. In the light of this, the drilling technologies for ultra-shallow horizontal wells were studied. Considering the geological characteristics of this region, the rock mechanics parameters of gneiss were adopted in simulation and the casing program was optimized. A customized PDC bit was designed and the bottomhole assembly and speed-up tools were optimized. In addition, supporting technologies such as float casing running and environmentally friendly low-solid drilling fluid which would effectively protect the reservoir were integrated. Thus, key drilling technologies were formed for ultra-shallow horizontal wells in the Jihua-1 Block of Jilantai Oilfield. They were applied to four wells in the field with no downhole complexity occurred, suggesting good well completion results. These technologies can provide technical support for the future development of horizontal wells in this block.
  • [1]
    全晓虎,蒋官澄,吕传炳,等. 双疏型储层保护技术在吉兰泰油田的应用[J]. 钻井液与完井液,2020,37(3):306–312.

    QUAN Xiaohu, JIANG Guancheng, LYU Chuanbing, et al. Reservoir protection with double hydrophobic agent in Jilantai Oilfield[J]. Drilling Fluid & Completion Fluid, 2020, 37(3): 306–312.
    [2]
    杨德相,屈争辉,陈树光,等. 河套盆地吉兰泰凹陷中生代构造层划分及意义[J]. 高校地质学报,2020,26(6):691–703.

    YANG Dexiang,QU Zhenghui,CHEN Shuguang, et al. Determination of mesozoic tectostratigraphic units and its significance in Jilantai Sag, Hetao Basin[J]. Geological Journal of China Universities, 2020, 26(6): 691–703.
    [3]
    李云峰,徐吉,徐小峰,等. 南堡2号构造深层潜山水平井钻井完井技术[J]. 石油钻探技术,2018,46(2):10–16.

    LI Yunfeng, XU Ji, XU Xiaofeng, et al. Drilling and completion techniques for horizontal wells in the deep buried hills of the Nanpu No. 2 structure[J]. Petroleum Drilling Techniques, 2018, 46(2): 10–16.
    [4]
    李伟峰,于小龙. 延长东部超浅层大位移水平井钻井技术难点与对策[J]. 非常规油气,2017,4(1):100–103, 83. doi: 10.3969/j.issn.2095-8471.2017.01.017

    LI Weifeng, YU Xiaolong. The ultra-shallow large displacement horizontal well drilling difficulty and solution in Yan-chang East Oilfield[J]. Unconventional Oil & Gas, 2017, 4(1): 100–103, 83. doi: 10.3969/j.issn.2095-8471.2017.01.017
    [5]
    刘永贵. 大庆致密油藏水平井高性能水基钻井液优化与应用[J]. 石油钻探技术,2018,46(5):35–39.

    LIU Yonggui. Optimization and application of high performance water-based drilling fluid for horizontal wells in Daqing tight oil reservoir[J]. Petroleum Drilling Techniques, 2018, 46(5): 35–39.
    [6]
    李维,李黔. 大位移水平井下套管漂浮接箍安放位置优化分析[J]. 石油钻探技术,2009,37(3):53–56. doi: 10.3969/j.issn.1001-0890.2009.03.013

    LI Wei, LI Qian. Optimization of float collar position in extended reach wells[J]. Petroleum Drilling Techniques, 2009, 37(3): 53–56. doi: 10.3969/j.issn.1001-0890.2009.03.013
    [7]
    陶红胜,王涛,于小龙,等. 延长石油浅层大位移水平井固井技术[J]. 石油矿场机械,2015,44(6):17–20.

    TAO Hongsheng, WANG Tao, YU Xiaolong, et al. Cement of shallow extended reach horizontal well in Yanchang Oilfield[J]. Oil Field Equipment, 2015, 44(6): 17–20.
    [8]
    王同友,王永松,张黎明,等. 大位移延伸井固井技术[J]. 石油钻采工艺,2001,23(2):18–21. doi: 10.3969/j.issn.1000-7393.2001.02.006

    WANG Tongyou, WANG Yongsong, ZHANG Liming, et al. Cementing technology of extended reach well[J]. Oil Drilling & Production Technology, 2001, 23(2): 18–21. doi: 10.3969/j.issn.1000-7393.2001.02.006
    [9]
    徐建飞,赵晓波. 硬地层定向 PDC 钻头个性化设计与应用[J]. 金刚石与磨料磨具工程,2014,34(3):57–61, 66.

    XU Jianfei, ZHAO Xiaobo. Design and application of directional PDC bit in hard formation[J]. Diamond & Abrasives Engineering, 2014, 34(3): 57–61, 66.
    [10]
    王建龙,郑锋,刘学松,等. 井眼清洁工具研究进展及展望[J]. 石油机械,2018,46(9):18–23.

    WANG Jianlong, ZHENG Feng, LIU Xuesong, et al. Advances and prospects of well cleaning tools[J]. China Petroleum Machinery, 2018, 46(9): 18–23.
    [11]
    冯强,陈世春,王建龙,等. 振动减摩阻工具振动参数及安放位置研究[J]. 石油钻探技术,2018,46(4):78–83.

    FENG Qiang, CHEN Shichun, WANG Jianlong, et al. Research on vibration parameters and determining the position of a vibration friction reducing tool[J]. Petroleum Drilling Techniques, 2018, 46(4): 78–83.
    [12]
    王建龙,张展豪,冯强,等. 水力振荡器与液力推力器集成应用研究[J]. 石油机械,2017,45(4):44–47.

    WANG Jianlong, ZHANG Zhanhao, FENG Qiang, et al. Study on the integrated application of hydraulic oscillator and hydraulic thruster[J]. China Petroleum Machinery, 2017, 45(4): 44–47.

Catalog

    Article Metrics

    Article views (591) PDF downloads (147) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return