| Citation: |
JIANG Tingxue, ZHOU Jun, JIA Wenfeng, ZHOU Linbo. Deep Penetration Acid-Fracturing Technology for Ultra-Deep Carbonate Oil & Gas Reservoirs in the Shunbei Oil and Gas Field[J]. Petroleum Drilling Techniques, 2019, 47(3): 140-147. DOI: 10.11911/syztjs.2019058
|
Carbonate reservoirs in the Shunbei Oil and Gas Field are characterized by ultra-deep, high temperature and high fracturing pressure gradient, which pose problems in short acid-etched fractures and rapid conductivity decline. In order to solve these problems, a team studied a deep penetration acid-fracturing technology for ultra-deep carbonate reservoirs, and they proposed a deep penetration acid-fracturingtechnique. Using a synthetic acid thickener and high temperature corrosion inhibitor, a high temperature resistant clean acid was developed. The acid fluid non-uniform etching conductivity test was carried out, and fracture conductivities with clean acid, gelled acid, and clean acid followed by gelled acid were analyzed at a closure stress of 20–90 MPa, respectively. The mechanism of the non-uniform displacement of acid fluid was studied, and the acid-fracturing process parameters of non-uniform etching were optimized. The study suggests that "clean acid + gelled acid" combined injection can greatly improve the conductivity of acid-etching fractures as well as nearly doubling effective fracture length. This new deep penetration acid-fracturing technology has been applied in 5 wells in the ultra-deep carbonate reservoir in Shunbei Oil and Gas Field. The success rate and effectiveness of the acid-fracturing operation reached 100% with post-frac production rate 107.7 m3/d, and average length 133.20 m. Consequently, this acid-fracturing technology can greatly improve the acid-fracturing effect in ultra-deep carbonate reservoirs, which provides a reference or best practices guidance in the acid-fracturing stimulation of similar reservoirs in China.
| [1] |
焦方正. 塔里木盆地顺北特深碳酸盐岩断溶体油气藏发现意义与前景[J]. 石油与天然气地质, 2018, 39(2): 207–216.
JIAO Fangzheng. Significance and prospect of ultra-deep carbonate fault-karst reservoirs in Shunbei Area, Tarim Basin[J]. Oil & Gas Geology, 2018, 39(2): 207–216.
|
| [2] |
邓尚, 李慧莉, 张仲培, 等. 塔里木盆地顺北及邻区主干走滑断裂带差异活动特征及其与油气富集的关系[J]. 石油与天然气地质, 2018, 39(5): 878–888.
DENG Shang, LI Huili, ZHANG Zhongpei, et al. Characteristics of differential activities in major strike-slip fault zones and their control on hydrocarbon enrichment in Shunbei Area and its surroundings, Tarim Basin[J]. Oil & Gas Geology, 2018, 39(5): 878–888.
|
| [3] |
刘哲. 顺北弱挥发性碳酸盐岩油藏合理开发方式研究[D]. 成都: 成都理工大学, 2018.
LIU Zhe. The reasonable development mode of weak volatile oil and carbonate reservoir in Shunbei Zone[D]. Chengdu: Chengdu University of Technology, 2018.
|
| [4] |
刘建坤,蒋廷学,周林波,等. 碳酸盐岩储层多级交替酸压技术研究[J]. 石油钻探技术, 2017, 45(1): 104–111.
LIU Jiankun, JIANG Tingxue, ZHOU Linbo, et al. Multi-stage alternative acid fracturing technique in carbonate reservoirs stimulation[J]. Petroleum Drilling Techniques, 2017, 45(1): 104–111.
|
| [5] |
王永辉, 李永平, 程兴生, 等. 高温深层碳酸盐岩储层酸化压裂改造技术[J]. 石油学报, 2012, 33(supplement 2): 166–173.
WANG Yonghui, LI Yongping, CHENG Xingsheng, et al. A new acid fracturing technique for carbonate reservoirs with high-temperature and deep layer[J]. Acta Petrolei Sinica, 2012, 33(supplement 2): 166–173.
|
| [6] |
张义, 赵海洋, 张烨. 超深高温高破裂压力储层酸压关键技术[J]. 石油钻采工艺, 2012, 34(2): 74–76. doi: 10.3969/j.issn.1000-7393.2012.02.020
ZHANG Yi, ZHAO Haiyang, ZHANG Ye. Key technologies of acid-fracturing for ultra-deep reservoirs with high temperature and high fracture pressure[J]. Oil Drilling & Production Technology, 2012, 34(2): 74–76. doi: 10.3969/j.issn.1000-7393.2012.02.020
|
| [7] |
王洋,袁清芸,李立. 塔河油田碳酸盐岩储层自生酸深穿透酸压技术[J]. 石油钻探技术, 2016, 44(5): 90–93.
WANG Yang, YUAN Qingyun, LI Li. Deep penetrating acid fracturing involving self-generated acid in carbonate reservoirs of the Tahe Oilfield[J]. Petroleum Drilling Techniques, 2016, 44(5): 90–93.
|
| [8] |
何青, 李克智, 徐兵威, 等. 致密碳酸盐岩气藏前置酸加砂酸压工艺研究及应用[J]. 钻采工艺, 2014, 37(5): 71–73. doi: 10.3969/J.ISSN.1006-768X.2014.05.23
HE Qing, LI Kezhi, XU Bingwei, et al. Research and application of pad acid sand fracturing technology tight carbonate reservoir[J]. Drilling & Production Technology, 2014, 37(5): 71–73. doi: 10.3969/J.ISSN.1006-768X.2014.05.23
|
| [9] |
李小刚, 杨兆中, 陈锐, 等. 前置液酸压缝中酸液指进的物模与分形研究[J]. 西南石油大学学报, 2007, 29(6): 105–108. doi: 10.3863/j.issn.1674-5086.2007.06.025
LI Xiaogang, YANG Zhaozhong, CHEN Rui, et al. Physical simulation and fractal feactures of acid fingering in acid fracturing treatment[J]. Journal of Southwest Petroleum University, 2007, 29(6): 105–108. doi: 10.3863/j.issn.1674-5086.2007.06.025
|
| [10] |
李小蓉. 白云岩储层多级交替注入酸压设计计算软件研究[J]. 钻采工艺, 2000, 23(4): 53–55, 73.
LI Xiaorong. Study on acid fracturing design software in alternate injection of dolomite reservoir[J]. Drilling & Production Technology, 2000, 23(4): 53–55, 73.
|
| [11] |
王栋, 徐心茹, 杨敬一, 等. 普光气田多级交替注入闭合酸压技术及其应用[J]. 油气地质与采收率, 2012, 19(6): 108–110. doi: 10.3969/j.issn.1009-9603.2012.06.026
WANG Dong, XU Xinru, YANG Jingyi, et al. Multistage alternating injection closed acid fracturing technology and its applicationgs in Puguang Gas Field[J]. Petroleum Geology and Recovery Efficiency, 2012, 19(6): 108–110. doi: 10.3969/j.issn.1009-9603.2012.06.026
|
| [12] |
李小刚, 杨兆中, 蒋海, 等. 酸压裂缝内酸液指进的计算机模拟与分形研究[J]. 西安石油大学学报(自然科学版), 2008, 23(5): 65–69. doi: 10.3969/j.issn.1673-064X.2008.05.017
LI Xiaogang, YANG Zhaozhong, JIANG Hai, et al. Computer simulation and fractal study of the fingering of the acid in an acid fracturing fracture[J]. Journal of Xi’an Shiyou University(Natural Science Edition), 2008, 23(5): 65–69. doi: 10.3969/j.issn.1673-064X.2008.05.017
|
| [13] |
杨兆中, 李小刚, 蒋海, 等. 指进现象模拟研究的回顾与展望[J]. 西南石油大学学报(自然科学版), 2010, 32(1): 85–88. doi: 10.3863/j.issn.1674-5086.2010.01.015
YANG Zhaozhong, LI Xiaogang, JIANG Hai, et al. Review and prospect of fingering phenomenon simulation[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2010, 32(1): 85–88. doi: 10.3863/j.issn.1674-5086.2010.01.015
|
| [14] |
蒋廷学, 丁云宏, 李治平, 等. 活性水携砂指进压裂的优化设计方法[J]. 石油钻探技术, 2010, 38(3): 87–91. doi: 10.3969/j.issn.1001-0890.2010.03.020
JIANG Tingxue, DING Yunhong, LI Zhiping, et al. Optimization and applications of active water fingering fracturing technique[J]. Petroleum Drilling Techniques, 2010, 38(3): 87–91. doi: 10.3969/j.issn.1001-0890.2010.03.020
|
| [15] |
徐中良, 戴彩丽, 赵明伟, 等. 酸压用交联酸的研究进展[J]. 应用化工, 2017, 46(12): 2424–2427. doi: 10.3969/j.issn.1671-3206.2017.12.034
XU Zhongliang, DAI Caili, ZHAO Mingwei, et al. Research and application progress of crosslinked gelled acid[J]. Applied Chemical Industry, 2017, 46(12): 2424–2427. doi: 10.3969/j.issn.1671-3206.2017.12.034
|
| [16] |
贾文峰, 任倩倩, 王旭, 等. 高温携砂酸液体系及其性能评价[J]. 钻井液与完井液,, 2017, 34(4): 96–100.
JIA Wenfeng, REN Qianqian, WANG Xu, et al. A high temperature sand carrying acid and its performance evaluation[J]. Drilling Fluid & Completion Fluid, 2017, 34(4): 96–100.
|
Supervisor：SINOPEC GROUP
Sponsor：Sinopec Research Institute of Petroleum Engineering
Serial Number：CN 11-1763/TE, ISSN 1001-0890
Chief Editor： WANG Minsheng
Supported by: Beijing Renhe Information Technology Co., Ltd. 
Service Account
Subscription Account
Video Channel
QR Code on Taobao
Wechat QR Code
Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.
DownLoad: