Volume 43 Issue 1
Jan.  2015
Turn off MathJax
Article Contents
Abstract
References
Zou Deyong, Guo Yulong, Zhao Jian, Chen Xiuping, Wang Jiajun, Yu Jinping. Experimental Study on Rock Breaking of Conical PDC Cutter[J]. Petroleum Drilling Techniques, 2015, 43(1): 122-125. DOI: 10.11911/syztjs.201501021
Citation: Zou Deyong, Guo Yulong, Zhao Jian, Chen Xiuping, Wang Jiajun, Yu Jinping. Experimental Study on Rock Breaking of Conical PDC Cutter[J]. Petroleum Drilling Techniques, 2015, 43(1): 122-125. DOI: 10.11911/syztjs.201501021
shu

Experimental Study on Rock Breaking of Conical PDC Cutter

  • School of Petroleum Engineering, China University of Petroleum (Huadong), Qingdao, Shandong, 266580, China

More Information
  • Received Date: June 08, 2014
    Graphical Abstract
    • Abstract
  • In order to optimize the structure of PDC bits and improve their breaking performance in hard formations, this paper analyzed the influences of cutting angle, cone apex angle, weight on bit (WOB) and other factors of rock breaking of conical PDC cutter, through experiment with basalt.The results showed that the conical cutter was better to be installed on the bit with its prong pointing the bit axis.With the increase of the cutting angle, the cutting depth increased first and then decreased-to the maximum when the cutting angle was 25°.The conical PDC cutter with small cone apex angle required smaller force to break the same volume of rock and the cutting depth increased with the WOB exponentially.The experimental results could provide reference for the design of a conical PDC bit.
    • FullText(HTML)
    • References (13)
  • [1]
    罗恒荣, 唐玉响, 徐玉超, 等.新型定向井PDC钻头的研制与应用[J].石油钻探技术, 2007, 35(5):86-89. Luo Hengrong, Tang Yuxiang, Xu Yuchao, et al.Research and application of a new PDC bit in directional well[J].Petroleum Drilling Techniques, 2007, 35(5):86-89.
    [2]
    杨顺辉, 武汉杰, 牛成成, 等.特种孕镶块加强PDC钻头的研制与试验[J].石油钻探技术, 2014, 42(6):111-114. Yang Shunhui, Wu Hanjie, Niu Chengcheng, et al.Manufacture and application of PDC bit enhanced by special diamond-impregnated segment[J].Petroleum Drilling Techniques, 2014, 42(6):111-114.
    [3]
    常领, 陈华忠.PDC钻头在胜利油田深井钻井中的应用[J].石油钻探技术, 2007, 35(4):92-93. Chang Ling, Chen Huazhong.Application of PDC bits to deep wells in Shengli Oilfield[J].Petroleum Drilling Techniques, 2007, 35(4):92-93.
    [4]
    Durrand C J, Skeem M R, Hall D R.Thick PDC, shaped cutters for geothermal drilling:a fixed cutter solution for a roller cone drilling environment: the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, Salt Lake City, June 27-30, 2010[C].
    [5]
    于鹏.适应硬地层的犁削型PDC钻头研究[D].青岛:中国石油大学(华东)石油工程学院, 2013. Yu Peng.Reseach on plow-crushing PDC bit adapted to hard formation[D].Qingdao:China University of Petroleum(Huadang), School of Petroleum Engineering, 2013.
    [6]
    邹德永, 于鹏, 杨光.硬地层破岩工具最新进展[J].石油机械, 2013, 41(6):1-5. Zou Deyong, Yu Peng, Yang Guang.Latest development of rock-crushing tools adapted to hard formation[J].China Petroleum Machinery, 2013, 41(6):1-5.
    [7]
    刘亚军, 王晓鹏, 王昆剑, 等.绥中36-1油田新型钻头的优化设计及应用[J].断块油气田, 2011, 18(5):669-671. Liu Yajun, Wang Xiaopeng, Wang Kunjian, et al.Optimization design and application of new drill bit in SZ36-1 Oilfield[J].Fault-Block oil Gas Field, 2011, 18(5):669-671.
    [8]
    Michael Azar, Allen White, Steven Segal, et al.Pointing towards improved PDC bit performance:innovative stinger shaped polycrystalline diamond element achieves higher rop and total footage[R].SPE/IADC 163521, 2013.
    [9]
    Jonak J.Influence of friction on the chip size in cutting the brittle materials[J].Journal of Mining Science, 2001, 37(4):407-410.
    [10]
    Kou S Q, Lindqvist P A, Tang C A, et al.Numerical simulation of the cutting of inhomogeneous rocks[J].International Journal of Rock Mechanics and Mining Sciences, 1999, 36(5):711-717.
    [11]
    Sunal O.Parametric study of a single PDC cutter with a numerical model[D].Morgantown:West Virginia University, 2009.
    [12]
    Mendoza J A, Gamwo I K, Zhang W, et al.Discrete element modeling of rock cutting using crushable particles:the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, Salt Lake City, June 27-30, 2010[C].
    [13]
    Pierry Joelle, Robert Charlier.Finite element modelling of shear band localisation and application to rock cutting by a PDC tool[R].SPE 28052, 1994.
    • Related Articles

  • Cited by

    Periodical cited type(1)

    1. 郑文培，宋诗冉，周涛涛，唐成，魏军会，唐桃. 基于混合因果逻辑的智能井控应急风险分析. 钻采工艺. 2025(02): 58-65 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views PDF downloads Cited by(1)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return