Long Barrel Coring Technology for the Well NV-3 in SakhaLin Island
-
摘要: NV-3井所在区块属于亚极地海洋环境,年钻井时间窗口十分狭窄.该井在取心钻井时,面临取心段长、时间紧等困难.为提高NV-3井的取心作业效率、缩短取心作业时间,根据该井所处地层的实际地质特点,制订了长筒取心作业方案,优选了取心钻头、岩心爪、取心筒等关键工具和装置,设计了取心筒组合方式,提出了能保证施工安全的关键技术措施,建立了取心内筒倒旋圈数和钻具安全提升高度计算公式.应用表明,建立的计算公式符合实际情况,选择的长筒取心工具和采用的技术措施效果良好,取心平均机械钻速达到8.4 m/h,平均岩心收获率达到99.9%.这说明,长筒取心技术可有效克服亚极地海域时间窗口狭窄的束缚,能显著提高取心效率.Abstract: Well NV-3 is on the shelf of Sakhalin Island, Russia,a location characterized by a sub-Arctic offshore climate. Every year the drilling time window is very short due to the harsh conditions. Here the coring duration must be as short as possible. In order to improve the coring efficiency and reduce the coring time of Well NV-3, the long barrel coring technology was used based on the geological features of relevant formation. Under this scheme, key tools were selected, including coring bit, core catcher and coring barrel, to form an optimal coring barrel assembly. Further, key technical measures were proposed for ensuring the operation safety. Moreover, the formulas were established to calculate the number of reverse cycles and the safe lifting height of drill tools. Practical applications showed that the formulas were satisfactory to the practical conditions, and both the coring barrel assembly and technical measures were efficient, contributing average ROP of 8.4 m/h in coring operation and the recovery rate of the core up to 99.9%. Accordingly, the long barrel coring technology could overcome the limitations caused by the short drilling time window in the sub-Arctic offshore climate and greatly improve the coring efficiency.
-
Keywords:
- long barrel coring /
- drilling /
- sub-Arctic /
- Well NV-3 /
- Sakhalin Island
-
-
[1] 路保平,李国华.俄罗斯萨哈林海洋钻井总承包工程[M].东营:中国石油大学出版社,2009:2-8. Lu Baoping,Li Guohua.EPC drilling project in Sakhalin offshore of Russia [M].Dongying:China Petroleum University Press,2009:2-8. [2] 孙琦,纪国栋,汪海阁,等.极地钻井装备现状及发展趋势浅析[J].石油钻探技术,2012,40(6):43-46. Sun Qi,Ji Guodong,Wang Haige,et al.Status and development trend of Arctic drilling equipment[J].Petroleum Drilling Techniques,2012,40(6):43-46. [3] 赵怛耀.钻井保压密闭取心技术应用分析[J].科技资讯,2013(7):109. Zhao Dayao.Analysis of pressure maintaining and coring techniques[J].Science Technology Information,2013(7):109. [4] 温秉权,黄勇.金属材料手册[M].北京:电子工业出版社,2009:152-153. Wen Bingquan,Huang Yong.Handbook of metal materials[M].Beijing:Publishing House of Electronics Industry,2009:152-153. [5] 孙少亮.中长筒保形取心技术在页岩气井中的应用[J].钻采工艺,2013,36(5):111-113. Sun Shaoliang.Long-mid tube shape-keeping coring in shale gas wells drilling[J].Drilling Production Technology,2013,36(5):111-113. [6] 王兴武,李让,王万红.我国西部地区超深井钻井取心技术[J].天然气工业,2010,30(11):63-66. Wang Xingwu,Li Rang,Wang Wanhong.Coring technology in ultra-deep wells in West China[J].Natural Gas Industry,2010,30(11):63-66. [7] 邓贺,陈华,王浩,等.中古203井超深钻井技术[J].油气田地面工程,2009,28(11):27-28. Deng Hejing,Chen Hua,Wang Hao,et al.Drilling technology in ultra-deep Well Zhonggu 203[J].Oil-Gasfield Surface Engineering,2009,11:27-28. [8] API RP 7G—1998 Recommended practice for drill stem design and operating limits[S].
-
期刊类型引用(4)
1. 康克利, 李明, 李浪. 中长筒取心技术在玛页1井的应用. 新疆石油天然气. 2020(01): 38-40+3 . 
百度学术
2. 张宝林, 闫园园, 石利星, 李石磊, 王雨, 王兵爽. 半潜式平台大直径三筒取心技术. 石油钻采工艺. 2018(04): 430-434 . 百度学术
3. 苏洋. 伊拉克格拉芙油田Mishrif储层长筒取心技术. 石油钻探技术. 2017(05): 30-35 . 本站查看
4. 王建宁. 亚极地海域油气田开发方式的选择. 石油钻采工艺. 2016(01): 73-76 . 百度学术
其他类型引用(2)
计量
- 文章访问数: 3678
- HTML全文浏览量: 88
- PDF下载量: 3674
- 被引次数: 6
下载:
