Optimization Methods for Drilling Hydraulic Parameters When Using Positive Displacement Down-Hole Motor
-
摘要: 螺杆钻具虽然应用广泛，但使用螺杆钻具条件下的钻井水力参数优化设计方法还不完善。为了指导钻井现场应用，以螺杆钻具的推荐工作参数为约束条件，应用数学规划方法建立了钻井液排量和钻头压降优选模型，给出了实用的钻井水力参数优化设计方法。研究表明，使用螺杆钻具时，应在螺杆钻具推荐工作参数内，以钻头水功率与螺杆钻具水功率之和最大为指标优选钻井水力参数；为了获得最优水力参数，螺杆钻具工作压降尽可能采用推荐工作压降，钻头压降尽可能接近螺杆钻具传动轴限定的最大钻头压降。Abstract: Although positive displacement down-hole motor(PDM)is commonly used in directional drilling at present,not much effort has been made in research on the optimization methods for drilling hydraulic parameters when using a PDM.An optimization model in drilling fluid rate and drill bit nozzle pressure-drop selection has been established by mathematical programming method while taking PDM’s recommended operating parameters as constrain conditions.The research results show that hydraulic parameters should be optimized within PDM’s recommended operating parameters while taking maximum total hydraulic power designated to drill bit and PDM as the target.To obtain optimum drilling hydraulic parameters,the PDM’s working pressure-drop should be within the recommended working pressure-drop while bit nozzle pressure-drop is close to the maximum of that transmission shaft of the down hole motor allows to.
-
-
[1] 刘谦.复合钻进技术在吐哈油田的应用[J].石油钻探技术,2002,30(2):38-40. Liu Qian.Applications of complex drilling techniques in Tuha Oilfield[J].Petroleum Drilling Techniques,2002,30(2):38-40. [2] 王希勇,朱礼平,胡大梁,等.复合钻井技术在川东北地区的应用[J].天然气工业,2008,28(11):77-79. Wang Xiyong,Zhu Liping,Hu Daliang,et al.Application of compound drilling technology in Northeast Sichuan Basin[J].Natural Gas Industry,2008,28(11):77-79. [3] Matthias Reich,Aeint Picksak,Wolfgang John.Competitive performance drilling with high-speed downhole motors in hard and abrasive formations[R].SPE 59215,2000.
[4] 张东海,刘俊山.复合钻井技术提高深井钻井速度[J].断块油气田,2003,10(6):79-82. Zhang Donghai,Liu Junshan.Compound drilling technique increases drilling speed in deep well[J].Fault-Block Oil Gas Field,2003,10(6):79-82. [5] 董明键.元坝124井超深井钻井提速配套技术[J].石油钻探技术,2011,39(6):23-26. Dong Mingjian.Technology to increase drilling speed used in ultradeep Well Yuanba 124[J].Petroleum Drilling Techniques,2011,39(6):23-26. [6] 苏义脑.螺杆钻具的工作特性[J].石油钻采工艺,1998,20(6):11-15,67. Su Yinao.Operating characteristic parameters of positive displacement down-hole motor[J].Oil Drilling Production Technology,1998,20(6):11-15,67. [7] 万朝晖.螺杆钻具工作特性和结构参数的分析研究[J].石油机械,2001,29(10):10-13. Wan Zhaohui.Operating characteristic and structural parameter s of screw drill[J].China Petroleum Machinery,2001,29(10):10-13. [8] 谢竹庄.螺杆钻具推力轴承的载荷研究[J].石油机械,1993,21(3):26-31. Xie Zhuzhuang.Research on loads on thrust bearings of positive displacement down-hole motor[J].China Petroleum Machinery,1993,21(3):26-31. [9] 陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:124-135. Chen Tinggen,Guan Zhichuan.Drilling engineering theory and technology[M].Dongying:Petroleum University Press,2000:124-135. [10] SY/T 5234—2004 优选参数钻井基本方法及应用[S]. SY/T 5234—2004 Basic methods for optimized drilling and application[S]. [11] 苏义脑.导向钻具选型与总体设计的原则和方法[J].石油钻采工艺,1999,21(3):18-27. Su Yinao.The principle and method for selection and master design of guide drill tool[J].Oil Drilling Production Technology,1999,21(3):18-27. [12] Samuel G Robello,Miska Stefan.Optimization of drilling parameters with the performance of multilobe positive displacement motor(PDM).SPE 47791,1998.
[13] 况雨春,马青松,王勤,等.钻井水力参数优化方法及应用现状[J].石油矿场机械,2010,39(7):1-4. Kuang Yuchun,Ma Qingsong,Wang Qin,et al.Drilling hydraulic parameters optimum method and application[J].Oil Field Equipment,2010,39(7):1-4. [14] 翟文涛.复合钻进条件下钻进参数优选方法研究[D].东营:中国石油大学(华东)石油工程学院,2008. Zhai Wentao.Optimization research on drilling parameter with downhole motor[D].Dongying: China University of Petroleum(Huadong),School of Petroleum Engineering,2008. -
期刊类型引用(5)
1. 程辉，刘新福，陶俊岭，郝忠献，于广海，魏松波，张凯，刘春花. 实时导向螺杆钻具钻柱螺纹动力学特性及优化设计方法. 机械工程师. 2023(07): 39-43 . 
百度学术
2. 吕波，武海鹏. 油气钻井中螺杆钻具的选型及应用. 黑龙江科学. 2023(12): 144-146 . 百度学术
3. 柳伟荣，倪华峰，王学枫，石仲元，谭学斌，王清臣. 长庆油田陇东地区页岩油超长水平段水平井钻井技术. 石油钻探技术. 2020(01): 9-14 . 本站查看
4. 邢星，吴玉杰，张闯，荣光来，李阳洁. 超深水平井钻井水力参数优选. 断块油气田. 2020(03): 381-385 . 百度学术
5. 马广军，张海平，王甲昌. 基于螺杆钻具的旋冲钻井装置设计及试验研究. 石油机械. 2016(06): 24-27 . 百度学术
其他类型引用(11)
计量
- 文章访问数: 2918
- HTML全文浏览量: 101
- PDF下载量: 3707
- 被引次数: 16
下载:
