Casing Abrasion Prediction for Deep and Extended Reach Wells
-
摘要: 为提高套管柱强度设计准确性,防止磨损失控情况发生,深入分析了套管磨损预测技术。结合定向井钻柱力学研究成果,考虑钻柱刚度和屈曲的影响,推导了深井和大位移井的钻柱拉力-扭矩方程,建立了基于能量原理的套管磨损程度预测模型,并编制了预测软件。该预测软件可以预测包括钻进、起下钻具等作业过程的,不同套管柱层次、钻具组合、井眼轨迹、钻井液类型和钻井参数等情况的全井段不同井深所对应的套管磨损量。实例计算结果表明,编制的预测软件减小了人为的估计误差,预测值更为准确可靠。研究成果为深井和大位移井安全高效钻进提供了新的技术支持。Abstract: In order to improve the design of casing strength and prevent severe casing wear out,casing abrasion prediction technology was analyzed.The tension-torque equation of drill string in deep wells and extended reach wells was deduced through identifying the drill string mechanics for directional wells,and considering stiffness and buckling of drill string.The prediction model of casing abrasion was established according to the energy principle and prediction software was developed.The software can predict casing abrasion at different depths in hole,for different casing program,BHA,well track,drilling fluid types and drilling parameters,during drilling and tripping.Its application shows that the software can give a more accurate and reliable prediction,with less artificial error.It provides new technical support to ensure safe and efficient drilling of deep wells and extended reach wells.
-
Keywords:
- deep well /
- extended reach well /
- drill stem /
- casing abrasion /
- prediction
-
-
[1] 梁尔国,李子丰,赵金海.磨损套管抗挤强度计算模型[J].石油钻探技术,2012,40(2):41-45. Liang Erguo,Li Zifeng,Zhao Jinhai.Model for collapsing strength calculation of worn casing[J].Petroleum Drilling Techniques,2012,40(2):41-45. [2] White J P,Dawson R.Casing wear:laboratory measurements and field predictions[J].SPE Drilling Engineering,1987,2(1):56-62.
[3] Bradley W B,Fontenot J E.The prediction and control of casing wear[J].Journal of Petroleum Technology,1975,27(2):233-245.
[4] Hall R W,Jr,Garkasi A,Greg D,et al.Recent advances in casing wear technology[R].SPE/IADC 27532,1994.
[5] 刘书杰,谢仁军,刘小龙.大位移井套管磨损预测模型研究及其应用[J].石油钻采工艺,2010,32(6):11-15. Liu Shujie,Xie Renjun,Liu Xiaolong.Research and application of casing wear prediction for extended reach well[J].Oil Drilling Production Technology,2010,32(6):11-15. [6] 曾德智,龚龙祥,付建红,等.全井段套管磨损量预测与磨损后抗挤强度计算方法研究[J].钢管,2010,39(增刊1):11-16. Zeng Dezhi,Gong Longxiang,Fu Jianhong,et al.Study on prediction of abrasion amount of and calculation method for post-abrasion collapse strength of full-length well casings[J].Steel Pipe,2010,39(supplement 1):11-16. [7] 廖华林,管志川,马广军,等.深井超深井内壁磨损套管剩余强度计算[J].工程力学,2010,27(2):250-256. Liao Hualin,Guan Zhichuan,Ma Guangjun,et al.Remaining strength calculation of internal wall worn casing in deep and ultra-deep wells[J].Engineering Mechanics,2010,27(2):250-256. [8] Johancsik C A,Friesen D B,Dawson R.Torque and drag in directional wells?prediction and measurement[R].SPE 11380,1983.
[9] 李子丰,李敬元,孔凡君.钻柱拉力-扭矩模型述评[J].石油机械,1993,21(8):43-46. Li Zifeng,Li Jingyuan,Kong Fanjun.Comment on tension-torque model of drillstrings[J].China Petroleum Machinery,1993,21(8):43-46. [10] 李子丰,梁尔国.钻柱力学研究现状及进展[J].石油钻采工艺,2008,30(2):1-9. Li Zifeng,Liang Erguo.Research and development of drill string mechanics[J].Oil Drilling Production Technology,2008,30(2):1-9. [11] Li Zifeng,Liu Xisheng,Zhou Daqian,et al.A steady tension-torque model for drillstring in horizontal wells[R].SPE 26295,1993.
[12] 李子丰,马兴瑞,黄文虎.油气井杆管柱的静力稳定性[J].工程力学,1997,14(1):17-25. Li Zifeng,Ma Xingrui,Huang Wenhu.Static stability of pipe string in oil and gas wells[J].Engineering Mechanics,1997,14(1):17-25. [13] 梁尔国.深井和大位移井套管磨损规律试验及磨损程度预测[D].秦皇岛:燕山大学机械工程学院,2012. Liang Erguo.The wear rule experiment and wear degree prediction of casing in deep wells and extended reach wells[D].Qinhuangdao:Yanshan University,School of Mechanical Engineering,2012.
计量
- 文章访问数: 3055
- HTML全文浏览量: 55
- PDF下载量: 3897
下载:
