涪陵页岩气田水平井井身结构优化设计

乐守群, 王进杰, 苏前荣, 常合磊, 陈林

乐守群, 王进杰, 苏前荣, 常合磊, 陈林. 涪陵页岩气田水平井井身结构优化设计[J]. 石油钻探技术, 2017, 45(1): 17-20. DOI: 10.11911/syztjs.201701003
引用本文: 乐守群, 王进杰, 苏前荣, 常合磊, 陈林. 涪陵页岩气田水平井井身结构优化设计[J]. 石油钻探技术, 2017, 45(1): 17-20. DOI: 10.11911/syztjs.201701003
YUE Shouqun, WANG Jinjie, SU Qianrong, CHANG Helei, CHEN Lin. The Optimization of Casing Programs for Horizontal Wells in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2017, 45(1): 17-20. DOI: 10.11911/syztjs.201701003
Citation: YUE Shouqun, WANG Jinjie, SU Qianrong, CHANG Helei, CHEN Lin. The Optimization of Casing Programs for Horizontal Wells in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2017, 45(1): 17-20. DOI: 10.11911/syztjs.201701003

涪陵页岩气田水平井井身结构优化设计

详细信息
    作者简介:

    乐守群(1986-),男,江苏盐城人,2008年毕业于西南石油大学石油工程专业,2011年获西南石油大学油气井工程专业硕士学位,工程师,主要从事钻井技术研究工作。

  • 中图分类号: TE24

The Optimization of Casing Programs for Horizontal Wells in the Fuling Shale Gas Field

  • 摘要: 涪陵页岩气田前期水平井因导眼和一开井眼尺寸大,导致机械钻速低,并存在一开井塌严重、二开井壁易失稳等问题。为此,在分析涪陵地区钻井工程地质环境特点的基础上,确定了套管必封点,并根据William钻速方程缩小了导眼和一开井眼的尺寸,将表层套管下深从长兴组上提至飞仙关组顶部,二开中完井深由进入浊积砂体3.00~5.00 m,调整为进入龙马溪组地层50.00~100.00 m后下入技术套管,从而形成了优化后的井身结构。涪陵页岩气田水平井自2014年后期开始采用优化后的井身结构,2015年105口水平井与2013年采用原井身结构的30口水平井相比,平均机械钻速提高了65.74%,在井深增大的情况下,平均钻完井周期缩短了20.95%。这表明,优化井身结构后达到了提高机械钻速、减少井下故障、缩短钻井周期的目的。
    Abstract: Due to the large size of conductors and boreholes in the first drilling section in the Fuling Shale Gas Field,the horizontal wells had issues such as low ROP,severe sidewall collapse during the first drilling section,and borehole instability during the second drilling section.Accordingly,the sealing points of casing were determined based on analyzing drilling engineering and geologic features of Fuling Area,based on the William drilling-speed equation,sizes of conductors and borehole of the first drilling section were reduced,the set depth of surface casing was withdrawn upward from the Changxing Formation to the top of Feixianguan Formation,and in the second drilling section,set the depth of intermediate casing was changed from 3.00-5.00 m into the turbidite sandstone to 50.00-100.00 m into the Longmaxi Formation.The optimized casing program has been applied to horizontal wells in the Fuling shale gas since late 2014,as a result,the ROP of the horizontal wells got higher,and drilling cycle was shorted.Compared with the 30 horizontal wells drilled in 2013,the average ROP of 105 horizontal wells drilled in 2015 was improved by 65.74%,and the average drilling cycle was shorted by 20.95% while the average well depth increased,which showed the optimization of the casing program effectively enhanced ROP,reduced the downhole complication and a shortened drilling cycle.
  • [1] 周贤海.涪陵焦石坝区块页岩气水平井钻井完井技术[J].石油钻探技术,2013,41(5):26-30. ZHOU Xianhai.Drilling completion techniques used in shale gas horizontal wells in Jiaoshiba Block of Fuling Area[J].Petroleum Drilling Techniques,2013,41(5):26-30.
    [2] 牛新明.涪陵页岩气田钻井技术难点及对策[J].石油钻探技术,2014,42(4):1-6. NIU Xinming.Drilling technology challenges and resolutions in Fuling Shale Gas Field[J].Petroleum Drilling Techniques,2014,42(4):1-6.
    [3] 艾军,张金成,臧艳彬,等.涪陵页岩气田钻井关键技术[J].石油钻探技术,2014,42(5):9-15. AI Jun,ZHANG Jincheng,ZANG Yanbin,et al.The key drilling technologies in Fuling Shale Gas Field[J].Petroleum Drilling Techniques,2014,42(5):9-15.
    [4] 林元华,宗玉宇,梁政,等.石油钻井机械钻速预测研究进展[J].石油钻探技术,2004,32(1):10-13. LIN Yuanhua,ZONG Yuyu,LIANG Zheng,et al.The developments of ROP prediction for oil drilling[J].Petroleum Drilling Techniques,2004,32(1):10-13.
    [5] 张令存.胜利油区大尺寸井眼提高钻速技术研究[D].东营:石油大学(华东)石油工程学院,2004. ZHANG Lingcun.Technological research on increasing drilling rate in large-scale well in Shengli Oilfield[D].Dongying:University of Petroleum(Huadong),School of Petroleum Engineering,2004.
  • 期刊类型引用(14)

    1. 李云峰,吴晓红,李然,周岩,罗成. 高5断块深层致密油水平井钻井关键技术实践. 石油机械. 2023(11): 102-107 . 百度学术
    2. 刘伟,朱礼平,潘登雷,周楚坤,梁霄,刘小斌. WR气田深层页岩气钻井提速提效实践与认识. 天然气技术与经济. 2022(03): 44-50 . 百度学术
    3. 张延兵,李录科,史配铭. 储气库水平井井身结构优化技术及应用. 当代化工研究. 2022(15): 135-138 . 百度学术
    4. 王莉,秦文斌,易争利. 复兴地区侏罗系页岩油气水平井井身结构优化设计. 江汉石油职工大学学报. 2022(06): 28-30+34 . 百度学术
    5. 崔月明,史海民,张清. 吉林油田致密油水平井优快钻井完井技术. 石油钻探技术. 2021(02): 9-13 . 本站查看
    6. 杨哲,李晓平,万夫磊. 四川长宁页岩气井身结构优化探讨. 钻采工艺. 2021(03): 20-23 . 百度学术
    7. 史配铭,李晓明,倪华峰,石崇东,姜庆波,程华林. 苏里格气田水平井井身结构优化及钻井配套技术. 石油钻探技术. 2021(06): 29-36 . 本站查看
    8. 胡大梁,欧彪,何龙,肖国益,李文生,唐宇祥. 川西海相超深大斜度井井身结构优化及钻井配套技术. 石油钻探技术. 2020(03): 22-28 . 本站查看
    9. 刘泽虎. 涪陵页岩气井井身结构优化及应用. 江汉石油职工大学学报. 2020(05): 46-48+72 . 百度学术
    10. 刘伟,何龙,胡大梁,李文生,焦少卿. 川南海相深层页岩气钻井关键技术. 石油钻探技术. 2019(06): 9-14 . 本站查看
    11. 唐诚,王志战,陈明,王崇敬,梁波,施强. 基于X射线荧光元素录井的深层页岩气精准地质导向技术. 石油钻探技术. 2019(06): 103-110 . 本站查看
    12. 李伟,刘文臣,周贤海,倪红坚,于凡,臧艳彬. 涪陵页岩气田三维水平井轨道优化设计方法探讨. 石油钻探技术. 2018(02): 17-23 . 本站查看
    13. 匡立新,刘卫东,甘新星,姜政华,陈士奎. 涪陵平桥南区块页岩气水平井钻井提速潜力分析. 石油钻探技术. 2018(04): 16-22 . 本站查看
    14. 张晓广. 伊拉克米桑油田深井水平井钻井技术. 探矿工程(岩土钻掘工程). 2018(11): 24-28 . 百度学术

    其他类型引用(4)

计量
  • 文章访问数:  20071
  • HTML全文浏览量:  168
  • PDF下载量:  16217
  • 被引次数: 18
出版历程
  • 收稿日期:  2016-06-11
  • 修回日期:  2016-11-24
  • 刊出日期:  1899-12-31

目录

    /

    返回文章
    返回